Прочие SCADA: iFix, InTouch, Citect, ...
-
Buaya
- Posts: 12
- Joined: Wed Jul 01, 2009 1:15 am
- Location: Malaysia
Post
by Buaya » Tue Jul 07, 2009 12:58 am
Hi All, I'm new, i need a help on the Hitech PWS700T-STN1 cable pin out to download from HMI to PC.
Thanks
-
Buaya
- Posts: 12
- Joined: Wed Jul 01, 2009 1:15 am
- Location: Malaysia
Post
by Buaya » Wed Jul 08, 2009 6:55 am
Already download from HMI to PC with ADP 3, now the problem is how to open the display to edit it?
Any one can let me know please.
-
cvlsam
- Posts: 48
- Joined: Mon May 29, 2006 8:22 am
- Location: China
Post
by cvlsam » Wed Jul 08, 2009 7:51 am
Buaya wrote:Already download from HMI to PC with ADP 3, now the problem is how to open the display to edit it?
Any one can let me know please.
Can only be used to re-download to the HMI, can not be edited.
Best Regards
-
Buaya
- Posts: 12
- Joined: Wed Jul 01, 2009 1:15 am
- Location: Malaysia
Post
by Buaya » Thu Jul 09, 2009 9:08 am
So, do you know what software can open and edit it?
I only edit the Chinese character convert to English due to all my subordinate
cannot recognize Chinese character.
-
cvlsam
- Posts: 48
- Joined: Mon May 29, 2006 8:22 am
- Location: China
Post
by cvlsam » Thu Jul 09, 2009 11:48 am
Buaya wrote:So, do you know what software can open and edit it?
I only edit the Chinese character convert to English due to all my subordinate
cannot recognize Chinese character.
You may not carry on the edition to it, you can manufacture your project only.
-
Buaya
- Posts: 12
- Joined: Wed Jul 01, 2009 1:15 am
- Location: Malaysia
Post
by Buaya » Fri Jul 10, 2009 12:38 am
Thank you very much for your information.