[?]: cable pin out for Hitech PWS700T-STN1

Buaya · Post by **Buaya** » Tue Jul 07, 2009 12:58 am

Hi All, I'm new, i need a help on the Hitech PWS700T-STN1 cable pin out to download from HMI to PC.

Thanks

Buaya · Post by **Buaya** » Wed Jul 08, 2009 6:55 am

Already download from HMI to PC with ADP 3, now the problem is how to open the display to edit it?
Any one can let me know please.

cvlsam · Post by **cvlsam** » Wed Jul 08, 2009 7:51 am

Buaya wrote:Already download from HMI to PC with ADP 3, now the problem is how to open the display to edit it?
Any one can let me know please.

Can only be used to re-download to the HMI, can not be edited.

Best Regards

Buaya · Post by **Buaya** » Thu Jul 09, 2009 9:08 am

So, do you know what software can open and edit it?
I only edit the Chinese character convert to English due to all my subordinate
cannot recognize Chinese character.

cvlsam · Post by **cvlsam** » Thu Jul 09, 2009 11:48 am

Buaya wrote:So, do you know what software can open and edit it?
I only edit the Chinese character convert to English due to all my subordinate
cannot recognize Chinese character.

You may not carry on the edition to it, you can manufacture your project only.

Buaya · Post by **Buaya** » Fri Jul 10, 2009 12:38 am

Thank you very much for your information.