migrate from from panel view 550 to panel view plus 600

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
omark
Posts: 4
Joined: Mon Apr 27, 2015 7:51 pm

migrate from from panel view 550 to panel view plus 600

Post by omark » Wed Jan 11, 2017 11:46 am

Hi everybody
I need to migrate my project in panel builder (panel view550) to panel view plus 600.
Can someone help me please?

tkx

Ryzhij
Posts: 404
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: migrate from from panel view 550 to panel view plus 600

Post by Ryzhij » Thu Jan 12, 2017 5:22 pm

"for the labourer is worthy of his hire"(Luke 10:7)
What do you suggest?

omark
Posts: 4
Joined: Mon Apr 27, 2015 7:51 pm

Re: migrate from from panel view 550 to panel view plus 600

Post by omark » Fri Jan 13, 2017 10:20 am

Ryzhij wrote:"for the labourer is worthy of his hire"(Luke 10:7)
What do you suggest?
sorry I dont interstand, what do you want to say?.

Ryzhij
Posts: 404
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: migrate from from panel view 550 to panel view plus 600

Post by Ryzhij » Fri Jan 13, 2017 5:52 pm

You really do not understand what serious work requires a serious approach, and must be paid?
How much are you willing to pay for this work?

wildpikachu
Posts: 7
Joined: Wed Mar 02, 2016 10:12 am

Re: migrate from from panel view 550 to panel view plus 600

Post by wildpikachu » Tue Jan 17, 2017 9:23 am

Hi Omark,

In simple terms.
1)Save the panelBuiler32 file as a .PBA file.
2)import the file into factoryTalkView by creating a new project and selecting import.
3)pay attention to any errors listed when the conversion completes and correct them.
4) check each page to confirm operation and styles - pay special attention to text size and numeric entry points.
5) create you project path for RsLinx Enterprise - make sure that your DF1/DH485/DH+ settings are correct.
6) compile the application and download to your new panelView Plus 6 600

I assume you meant the panelView Plus 6 series HMI and not the panelView Plus series as the standard panelView Plus series is no longer available (at least here).

http://literature.rockwellautomation.co ... _-en-p.pdf <-- link to the migration guide
http://literature.rockwellautomation.co ... _-en-p.pdf <-- link to the catalogue migration guide.

Cheers

omark
Posts: 4
Joined: Mon Apr 27, 2015 7:51 pm

Re: migrate from from panel view 550 to panel view plus 600

Post by omark » Wed Jan 18, 2017 12:39 pm

wildpikachu wrote:Hi Omark,

In simple terms.
1)Save the panelBuiler32 file as a .PBA file.
2)import the file into factoryTalkView by creating a new project and selecting import.
3)pay attention to any errors listed when the conversion completes and correct them.
4) check each page to confirm operation and styles - pay special attention to text size and numeric entry points.
5) create you project path for RsLinx Enterprise - make sure that your DF1/DH485/DH+ settings are correct.
6) compile the application and download to your new panelView Plus 6 600

I assume you meant the panelView Plus 6 series HMI and not the panelView Plus series as the standard panelView Plus series is no longer available (at least here).

http://literature.rockwellautomation.co ... _-en-p.pdf <-- link to the migration guide
http://literature.rockwellautomation.co ... _-en-p.pdf <-- link to the catalogue migration guide.

Cheers


Hi wildpikachu,

Thank you so much for your answer
The problem that i had is how to open panelbuilder file in factoryTalkView but after your explication i understand and i well do that after download and install factoryTalkView

thank you again

omark
Posts: 4
Joined: Mon Apr 27, 2015 7:51 pm

Re: migrate from from panel view 550 to panel view plus 600

Post by omark » Wed Jan 18, 2017 12:44 pm

Ryzhij wrote:You really do not understand what serious work requires a serious approach, and must be paid?
How much are you willing to pay for this work?
I’m ok with you
But normally there some Tricks in ALLEN Bradley software can do this work.

Post Reply