[?]: Firmware for Panelview

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
hiecham
Posts: 6
Joined: Tue Jun 29, 2010 9:02 am

[?]: Firmware for Panelview

Post by hiecham » Sat Oct 06, 2012 12:40 am

Does anyone knows how to download firmware on PanelView600?
and also where i can get file system for this panel? and any software to use?
thnak you

Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: Firmware for Panelview

Post by Ryzhij » Sat Oct 06, 2012 4:39 am

For PanelView600 or for PanelViewPlus600 firmware you need?
Let me know Catalog No. your device.
IMHO the best way updating is the use flash card.
It's very simple:
Write file on flash card -> Inset card into panel -> Power On -> Wait -> Enjoy
But any project in panel will be lost!

hiecham
Posts: 6
Joined: Tue Jun 29, 2010 9:02 am

Re: [?]: Firmware for Panelview

Post by hiecham » Sun Oct 07, 2012 12:56 am

thnkx for reply, PanelView 600 cat: 2711-K6C8 Ser:B

excuse my english

Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: [?]: Firmware for Panelview

Post by Ryzhij » Sun Oct 07, 2012 5:12 am

Ok!
Link for your panel files: https://dl.dropbox.com/u/23174116/K6C8.rar
(fback)

hiecham
Posts: 6
Joined: Tue Jun 29, 2010 9:02 am

Re: [?]: Firmware for Panelview

Post by hiecham » Sun Oct 07, 2012 11:53 pm

thank you very much.
but when I lit the device (PANELVIEW) LED blinks default continues and the screen does not turn on, is what his means that the device needs an update??

Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: [?]: Firmware for Panelview

Post by Ryzhij » Mon Oct 08, 2012 4:46 am

How old your Panel? Maybe replace back-light lamp to need?

hiecham
Posts: 6
Joined: Tue Jun 29, 2010 9:02 am

Re: [?]: Firmware for Panelview

Post by hiecham » Mon Oct 08, 2012 10:40 pm

about 6 years.
but i don't have backlight lamp for change; it's commercialised??

Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: [?]: Firmware for Panelview

Post by Ryzhij » Tue Oct 09, 2012 7:59 am

Yes, these lamps are sold as spare parts.
But!!!
Unfortunately, I'm faced with the fact that apparently the same panels are inside a display matrix from different vendors, and of course, the different backlight.
Refer to a service center. Maybe there will be something to offer.
(thnx)

hiecham
Posts: 6
Joined: Tue Jun 29, 2010 9:02 am

Re: [?]: Firmware for Panelview

Post by hiecham » Tue Oct 09, 2012 11:10 pm

thank you very much

Tecon
Posts: 1
Joined: Tue May 03, 2011 7:15 am

Re: [?]: Firmware for Panelview

Post by Tecon » Fri Jan 25, 2013 4:43 pm

hi,
I got question about firmware too,
Had some work to do on this panel:
ImageImage

I'm using Factory Talk View Studio 6.10.00 (CPR 9 SR 4), Patch 00, Build 09

The problem is that I can't change any firmware on factory. So is there any way to tell if I can modify/upload project with this? Or what I have to install to do it. And I got to do it in one visit :|

Thanks for any suggestions.

varaderorules
Posts: 1
Joined: Wed Dec 19, 2012 2:06 am

Re: [?]: Firmware for Panelview

Post by varaderorules » Mon Apr 22, 2013 7:02 pm

hi, its possible to change the internal batery? How i do?
it´s a panelview 600.
tks

Post Reply