Page 1 of 1
AB RSLinx Software
Posted: Thu Sep 01, 2011 8:51 am
by Christine_1914
Hi,
I am currently working on an AB project.
I just want to know:
1.If there is any difference between RSLinx Classic Gateway CPR 9 SR1 and RSLinx Classic Gateway CPR 9 SR3.
2. Does it matters if I loaded RSLinx Classic Gateway CPR 9 SR3 to run RSView32 CPR 9 SR1?
3. Is there something that I still need to configure? (from the below case)
(There is an existing and running RSLinx on-site, but we just borrowed the license (RSLinx Classic Gateway CPR 9 SR1) from Rockwell.
We bought this new license RSLinx CPR 9 SR3 to replace the existing license.
I registered the license via internet at the office and transferred it on-site. I uninstalled the existing RSLinx and installed the new one (the one that we bought) togeteher with the registered license. But when I opened the RSView32 runtime, it is not stating on online mode. I tried to ping the SLC505 and look for it at the new installed RSLinx and it was there.
Note: I didn't create a back-up of the one I uninstalled.)
P.S. I encountered this service pack issue with Siemens' WinCC 7.0 SP1 and SP2. That's why I'm thinking if AB's service pack also matters and compatible to each other.
Re: AB RSLinx Software
Posted: Thu Sep 01, 2011 1:06 pm
by LarsKBH
Hello !
The difference in versions should not give you any problems.
I think the latest version 2.57 also supporte Win7.
Have you confugured driver and IP adress for PLC in RSLinx ?
in menu->Communication->Configure drivers-> Add Ethernet->
In station mapping, write IP of PLC->Apply->Ok, and working
Regards Lars
Re: AB RSLinx Software
Posted: Thu Sep 01, 2011 2:57 pm
by brave_eagle
Thunder://QUFodHRwOi8vc3VwcG9ydC5yb2Nrd2VsbGF1dG9tYXRpb24uY29tL1dlYkZpbGVzL1VucHJvdGVjdGVkLzkzNTVXQUIxMDBFTkUvMi41OC4wMC9Db3JlLzIuNTguMDAtUlNMaW54TGl0ZS1BLURWRC56aXBaWg==
RSLinx 2.58
Pls download the "Thunder" download tools to download the link
Re: AB RSLinx Software
Posted: Thu Sep 01, 2011 3:47 pm
by Dr.Acrobat
Where is possibile found "Thunder" please.
Re: AB RSLinx Software
Posted: Fri Sep 02, 2011 1:04 am
by Christine_1914
LarsKBH wrote:
Have you confugured driver and IP adress for PLC in RSLinx ?
in menu->Communication->Configure drivers-> Add Ethernet->
In station mapping, write IP of PLC->Apply->Ok, and working
I already did this configuration but with no positive output for the RSView32 to go online.
brave_eagle wrote:Thunder://QUFodHRwOi8vc3VwcG9ydC5yb2Nrd2VsbGF1dG9tYXRpb24uY29tL1dlYkZpbGVzL1VucHJvdGVjdGVkLzkzNTVXQUIxMDBFTkUvMi41OC4wMC9Db3JlLzIuNTguMDAtUlNMaW54TGl0ZS1BLURWRC56aXBaWg==
RSLinx 2.58
Pls download the "Thunder" download tools to download the link
May I know what is this for? I tried to open the link but my Firefox prompted a message "Firefox doesn't know how to open this address, because the protocol (thunder) isn't associated with any program."
Re: AB RSLinx Software
Posted: Fri Sep 02, 2011 1:16 am
by brave_eagle
Re: AB RSLinx Software
Posted: Sat Sep 03, 2011 10:07 am
by cuongvcs
Thank you very much
Re: AB RSLinx Software
Posted: Sun Sep 04, 2011 6:01 pm
by soundview00
Thanks.
Re: AB RSLinx Software
Posted: Thu Sep 08, 2011 10:43 am
by mesta1
To go online with RsView you need to configure RSLinx enterprise, that it's included inside RSView and in your project too. You should also stop RsLinx Classic too from control panel.
RsLinx classic gateway is used as OPC server for other supervisors or to go online with RsLogix.
Re: AB RSLinx Software
Posted: Thu Sep 22, 2011 6:32 pm
by vuonganh
Re: AB RSLinx Software
Posted: Thu Sep 22, 2011 6:44 pm
by soundview00
Is this the lite, professional, or enterprise edition?
Re: AB RSLinx Software
Posted: Thu Sep 22, 2011 6:53 pm
by LarsKBH
Without license it is Lite, with license it is Professional.
Enterprise is another software - Linx Enterprise
Re: AB RSLinx Software
Posted: Fri Sep 23, 2011 2:31 am
by vuonganh
it is RSLinx Gateway 2.58.00 with license (installation package of RSLinx Gateway 2.58.00 )
http://www.rockwellautomation.com/rockw ... efits.html
Re: AB RSLinx Software
Posted: Fri Sep 23, 2011 5:32 am
by soundview00
Thanks for the info.
Re: AB RSLinx Software
Posted: Mon Sep 26, 2011 6:21 pm
by neuhauser
I've seen similar problems in the past with linx if you don't backup the network before reinstalling. In linx classic even if you set up the drivers with the same names you will get unpredictable results going online until you re-setup the plc comm paths and save to the project.
Re: AB RSLinx Software
Posted: Thu Sep 29, 2011 1:42 am
by Dr.Acrobat
vuonganh for megaupload needed premium account.
Could you upload just gateway license.
Thanks.
Re: AB RSLinx Software
Posted: Wed Feb 08, 2012 2:36 pm
by pftarazona
Re: AB RSLinx Software
Posted: Tue Nov 17, 2015 4:52 pm
by Samiro
posting.php?mode=reply&f=12&t=16361#
Could someone please repost a link for RSLinx 2.58 or is there a way of cracking the activation of version 2.59?
Pleasehelp