[?]: connect Panel View Plus 1250

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
temo281284
Posts: 4
Joined: Sat Aug 28, 2010 1:45 pm

[?]: connect Panel View Plus 1250

Post by temo281284 » Sat Jun 04, 2011 12:58 pm

Dear Frinds
I have a project that contains an Allen Bradley Panel view plus 1250
What do i need to connect to this panel and upload the program from it :roll:
I have FactoryTalk View ME software and P2P serial cable, But i couldn't connect till now
please help as soon as possible

Rock_manp
Posts: 4
Joined: Fri Jun 03, 2011 8:41 pm

Re: Panel View Plus

Post by Rock_manp » Sat Jun 04, 2011 3:01 pm

The panelview Plus is primarily Ethernet. You will need to set the IP address of the PanelView and the IP address of your computer and use a crossover cable or an Ethernet switch/hub.

cuongvcs
Posts: 148
Joined: Fri May 23, 2008 4:00 pm
Location: Vietnam

Re: Panel View Plus

Post by cuongvcs » Sun Jun 05, 2011 4:07 am

hi you .
you can use Transfer Utility of Factory Talk View ME tool to download and upload application with RS232 serial cable .
or you can use USB .
for use USB you can convert application file .apa to file .mer and copy application in to Panelview memory .
when you connect the USB for Panelview, it will automatically create folders .
EX : I:\Rockwell Software\RsViewME\Runtime
then you can use it.
good luck (thnx) (thnx) (thnx)

Post Reply