[?]: How to upload program from Panelview-plus-400 by Ethern

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

[?]: How to upload program from Panelview-plus-400 by Ethern

Post by hussein kamal » Mon Apr 18, 2011 9:48 pm

hi every one
can any one help me i need to upload program from Panelview-plus-400 by Ethernet but i try to take IP from screen but i don't how and i don't have IP address for that screen and it in run and which keypad give to access to get IP
(fback) (fback) (sos) (sos) (sos) (sos) (sos) (sos) (sos)

collgl
Posts: 11
Joined: Fri Feb 04, 2011 10:45 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by collgl » Sun May 01, 2011 4:36 pm

you can find ip in mode config.

hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by hussein kamal » Mon May 02, 2011 9:18 am

Dear collgl
thanks for your reply and the screen go in run mode when start so how i go to mode configuration on it
so many thanks to you

Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by Ryzhij » Mon May 02, 2011 6:26 pm

You can use Configuration_Screen_Utility, which you can read about here or here (temporary mirror) (dlink) and download an archive of it here or here (dlink) (I will keep for a while).
This utility allows you to access the configuration screen panel, overriding automatic launching of the project in the panel .

hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by hussein kamal » Mon May 02, 2011 7:29 pm

thanks many thanks to you
but if there is way to get in pv+ to see terminal view to get ip addresses and upload program like push f1or f2 while start some thing like that

collgl
Posts: 11
Joined: Fri Feb 04, 2011 10:45 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by collgl » Fri May 13, 2011 6:36 pm

To enter the configuration mode,for touch screen, you could touch the upper left corner and the lower right corner of the screen simultaneously at startup.

hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by hussein kamal » Sat May 14, 2011 1:10 am

collgl wrote:To enter the configuration mode,for touch screen, you could touch the upper left corner and the lower right corner of the screen simultaneously at startup.
thanks man i used that away to get in pro-face touch screen i hope to tell me in pv+ 400 how i get in terminal configuration to get ip address to upload program
thanks again

collgl
Posts: 11
Joined: Fri Feb 04, 2011 10:45 am

Re: [?]: How to upload program from Panelview-plus-400 by Et

Post by collgl » Sun Nov 11, 2012 1:11 am

at star-up of your PV400+, you can click the small white box when it displays in the lower left corner of the screen to enter the mode configuration.

Post Reply