[?]: How communicate AB MicroLogix 1500 and PanelView + 600

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
hacynhan
Posts: 3
Joined: Sun Jun 20, 2010 3:14 pm

[?]: How communicate AB MicroLogix 1500 and PanelView + 600

Post by hacynhan » Mon Aug 16, 2010 7:57 am

I have PLC MicroLogix 1500 and PanelView Plus 600. How communicate them. I tryed RSLinx Enterprise but not successful. Help me
Top
joker12
Posts: 13
Joined: Thu Oct 18, 2007 2:41 am
Location: America

Re: [?]: How communicate AB MicroLogix 1500 and PanelView +

Post by joker12 » Wed Aug 18, 2010 5:45 pm

What Model is the 1500??? What is the Model of the PV600???

You need to supply a lot more info
Top
cuongvcs
Posts: 148
Joined: Fri May 23, 2008 4:00 pm
Location: Vietnam

Re: [?]: How communicate AB MicroLogix 1500 and PanelView +

Post by cuongvcs » Mon Aug 23, 2010 12:54 pm

You can used RS-232 cable for communication between Micrologix 1500 and Panelview 600 plush.
Micrologix1500 which has no port RS-232?
Good luck
Top
eseq
Posts: 6
Joined: Mon Oct 26, 2009 12:58 pm
Location: UK

Re: [?]: How communicate AB MicroLogix 1500 and PanelView +

Post by eseq » Fri Mar 25, 2011 1:14 pm

What about ethernet, You can use serial connection as well. There is better solution ass Allen Bradley offers cheaper Panelview Compact and you can download ready plc/hmi code with manual how to connect them

Search on Allen Bradley Website for Connected Component Solution and Download Software( about 300mb )


Regards
Andy
http://www.automationengineering.co.uk
Top
ERPal
Posts: 9
Joined: Mon Sep 27, 2010 8:30 pm

Re: [?]: How communicate AB MicroLogix 1500 and PanelView +

Post by ERPal » Sat Mar 26, 2011 9:10 pm

Hello

communication between these two teams can be serial (RS232) with either DF1 or DH485 protocol.

the fact is that if you want to use your cable programming Micrologix to PV +, you will require a Null-Modem, so that the link is made
Top
Post Reply

Return to “Allen-Bradley (Rockwell Automation)”