Request: Non-Siemens Remote I/O for Siemens PLCs

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
Gene
Posts: 42
Joined: Wed Nov 07, 2007 2:29 pm
Location: Ukraine

Request: Non-Siemens Remote I/O for Siemens PLCs

Post by Gene » Mon Jun 30, 2008 8:28 am

Hi all,

anybody seen this interesting link:
http://www.industry.siemens.de/industri ... /iosys.htm

There are some blocks to make connection of non-Siemens remote I/O (like P+F, Turck, CEAG) to SIemens PLC. Even to H-systems.

Anybody can share such a blocks between others?

BR

Gene
Posts: 42
Joined: Wed Nov 07, 2007 2:29 pm
Location: Ukraine

Post by Gene » Tue Jul 29, 2008 4:56 am

Guys!

No one have expirience to do I/O for S7-400H based not on ET200M or ET200S?

Regards,
Gene

ntban
Posts: 13
Joined: Thu Aug 09, 2007 6:46 am
Location: Vietnam

Post by ntban » Sat Feb 28, 2009 1:55 am

Phoenix Contact I/Os system can be interested...

http://eshop.phoenixcontact.com.sg/phoe ... Frame=true

mharmouche
Posts: 3
Joined: Sat Mar 07, 2009 5:59 pm
Location: Saudi Arabia

Post by mharmouche » Sun Mar 08, 2009 5:06 pm

Gene wrote:Guys!

No one have expirience to do I/O for S7-400H based not on ET200M or ET200S?

Regards,
Gene
Hi Gene,
take for exemple the CPU 412-3H , for sure on the rail of CPU we have 2CPU ( redundent) so 2 profibus.
on the rail of extention Module , you can use 2 IM153-2 ( each one is communicate for i CPU of the 2 CPU 412-3H) then the I/O modules.
hope I answerd you. :D
regard,

Gene
Posts: 42
Joined: Wed Nov 07, 2007 2:29 pm
Location: Ukraine

Post by Gene » Mon Mar 09, 2009 9:18 am

Hi MHARMOUCHE,

thanks for your information.
I know such configuration and we did it before many times.
But my question was about non-Siemens (ET200M, ET200S) remote I/O
which supports redundant Profibus-DP. For example, ABB S800/S900,
CEAG (P+F) LB/FB series etc.
See more info on link in my first post.

Kindest Regards,
Evheniy

Post Reply