[?] : cable to connect the pc to plc S5

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
liu2002
Posts: 18
Joined: Sun Dec 16, 2007 9:50 am
Location: China

[?] : cable to connect the pc to plc S5

Post by liu2002 » Fri Jan 11, 2008 1:51 am

I want to diy a cable to connect the pc to plc S5 (step5),
who can give the diagram,
thanku!!!!!

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: [?] : cable to connect the pc to plc S5

Post by Umencho » Fri Jan 11, 2008 6:09 am

liu2002 wrote:I want to diy a cable to connect the pc to plc S5 (step5),
who can give the diagram,
thanku!!!!!

Hi

Use search option in http://plcforum.uz.ua :lol:

regards

mick_5l
Posts: 1
Joined: Wed Jun 03, 2009 3:16 pm
Location: Australia

Post by mick_5l » Fri Jun 05, 2009 1:07 am

I made my own using the following:

In the AutoCAD R12 file there is a complete drawing of a RS232 to
20mA Current Loop converter, suitable for data access or programming
functions.
It works on all Simatic S5 CPUs (tested on 100U CPU 100/102/103,
115U CPU941/942/943/944, 135U CPU928, not tested on 150U and 155U)

Since this is a PASSIVE converter (the current source is fetched
from the PLC port), it is not possible to program other devices
such as CP526/CP527 or OP393/OP396/OP5 etc., which require an ACTIVE
(with separate power source) converter.

Istructions:

- Open the file with AutoCAD R12 or higher.

- set the correct scale ratio in your computer to print the drawing
(spacing between the pins of the ICs must be 2.54mm)

- print the drawing onto a plastic transparent sheet (you may
print it on white paper and then photocopy it on plastic sheet)

- use the plastic sheet as master to obtain your printed circuit
by using photo-sensible boards.
S5_COM_TTY_hardware.zip
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q3 ... D5DI6JNcvI

Code: Select all

https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q36XusGJ0RDvqKXxdCmWMaWcNxD5DI6JNcvI

mseena
Posts: 4
Joined: Tue Jun 09, 2009 1:08 pm
Location: India

S5 cable Details [150U - CPU924]

Post by mseena » Mon Aug 31, 2009 5:47 am

Hi mick_5l,

Can you please send the link again I am not able to download the file. or is there is any way to upload the 150 U CPU924 program.

Thanks,

klamous
Posts: 3
Joined: Sat Dec 02, 2023 9:30 am

Re: [?] : cable to connect the pc to plc S5

Post by klamous » Mon Dec 18, 2023 5:42 pm

Good evening
can any re-upload the schematic of cable programming S5 plc.

indian
Posts: 122
Joined: Fri Aug 11, 2006 6:16 pm
Location: Russia, Komi

Re: [?] : cable to connect the pc to plc S5

Post by indian » Fri Dec 29, 2023 8:47 pm

The schematic of S5 adapter I made myself more than 20-ty years ago. Now You probably can't find out cellular phone data cable, so use USB-RS232 TTL cable.
The schematic is quite simple to understand how does it works.

http://gofile.me/400mr/MofAcjIgE

Image

Post Reply