[Link]: Step7 MicroWin V4.0 SP4

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
flopez
Posts: 99
Joined: Sat Feb 25, 2006 11:33 pm
Location: Europe

[Link]: Step7 MicroWin V4.0 SP4

Post by flopez » Thu Aug 17, 2006 3:07 pm

Hello Personal Here it is going link to Step7 MicroWin V4.0 SP4

http://support.automation.siemens.com/W ... d=23544932

After Download expand the Files in a new Folder and
change the setup.INX Files

Your Download-Link: Link_is_Dead :(/files/29748447/setup.inx.html



One more option for installation completes of the file STEP7-MicroWIN_V40_SP4.exe
For who doesn't want to substitute the file setup.inx there is this.
Before installing the file STEP7-MicroWIN_V40_SP4.exe

To create a file with the extension reg (nome.reg)
To edit that file with an editor WorPad and to increase these text lines
-------------------------------------------------------------------------------------
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\Software\SIEMENS\MicroSystems\Common\Update320]

[HKEY_LOCAL_MACHINE\Software\SIEMENS\MicroSystems\Common\Toolbox\Components]
"CountLibs"=dword:00000001
-------------------------------------------------------------------------------------
to join to the register windows

It only remains a good luck for the installation.

Information……
If it edits the file Setup.inx the following he/she can se

.'...#..........!.............!........UPDATE_FOUND.......................!.2...........!...........Microwin.exe..................
!...........s7200.exe..................!.]......!......>...!.J........!........COMPANY_NAME.......
.............Software................Common.............Update320!.D.........!..

-------------------------------------------------------------------------------------

By Flopez

Maxime
Posts: 53
Joined: Sun Oct 01, 2006 12:17 pm
Location: Europe

Step7 MicroWin V40 SP4

Post by Maxime » Wed Oct 18, 2006 3:30 pm

Does anybody has by chance a key for S7 MicroWin V40 SP4???

thnx

flopez
Posts: 99
Joined: Sat Feb 25, 2006 11:33 pm
Location: Europe

Re: Step7 MicroWin V40 SP4

Post by flopez » Wed Oct 18, 2006 10:34 pm

Maxime wrote:Does anybody has by chance a key for S7 MicroWin V40 SP4???

thnx
hello
before installing the s7-200 MicroWin V4.0 SP4, to unite this file to the register of the Windows XP Link_is_Dead :(/files/37268714/S7200V4.0.reg.html

it excuses if I am not to explain well but I don't know English well

flopez

Scowl
Posts: 50
Joined: Sun Nov 27, 2005 7:46 pm
Location: Russia

Post by Scowl » Wed Jan 10, 2007 6:57 pm

Files S7200V4.0.reg and setup.inx at rapidshare.de has been deleted. Could anybody reupload them?

CoMod
Site Admin
Posts: 3971
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Post by CoMod » Wed Jan 10, 2007 7:41 pm

http://files.cvalka.com directory Simatic

MicroWin_3_and_4.zip
62.67 Kb
Last edited by CoMod on Tue Mar 20, 2007 6:24 pm, edited 1 time in total.

Scowl
Posts: 50
Joined: Sun Nov 27, 2005 7:46 pm
Location: Russia

Post by Scowl » Thu Jan 11, 2007 2:49 pm

CoMod
они пойдут для SP4?

CoMod
Site Admin
Posts: 3971
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Post by CoMod » Thu Jan 11, 2007 3:33 pm

Если судить по названиям - то да.

Насколько я помню для России Микровин вообще бесплатен.

TheNewS7
Posts: 7
Joined: Wed Dec 14, 2005 12:33 pm
Location: Europe

SP5 is out now!

Post by TheNewS7 » Sun Feb 25, 2007 10:38 am

Download MicroWIN 4.0 SP5 from Siemens Support:

http://support.automation.siemens.com/W ... d=24676877

Download place for the setup.inx file: www.cvalka.com

Start the Setup and go to your lokal\Temp folder, wait up the language Dialog from Setup and save the complete new folder on an other place.

There after you can abort the setup.

Replace the setup.inx file with the new file and start the setup again...



PS: if anybody have the orginal Siemens Font from URW++:
Siemens Sans, Siemens Serif or Siemens Slab,
please publish it.

Thanks, the new s7.

Post Reply