Page 1 of 1
[?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Sun Nov 27, 2022 7:06 pm
by amrit
Hi, My name is Amrit and need urgent help. I am new to step 7 V5.2 and wincc 5.1.
I got a job with faulty computer motherboard. Hard drives working fine with USB converter.
Now i prepare same environment in second computer.
Please let me know how to transfer safely program from Hard drives to running computer.
If I copy same folders and past in same location, then it will work or not.
Project file is around 27GB.
please guide me.
Re: [?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Mon Nov 28, 2022 6:11 pm
by Dfcz
Hello. A lot depends on the configuration of the computer on which Step 7 and Wincc were running. The best thing is to find a motherboard exactly like the one that failed. In any other case, you will need to re-configure the work of Step 7 and Wincc.
Re: [?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Tue Nov 29, 2022 5:03 pm
by amrit
thank you for your reply. I prepared second desktop computer with same environment. but wincc v5.1 and protool 6.0 sp2 license keys unable to find. now step 7 v5.2 except program and responding well but wincc shown me in demo mode.
I try to boot program with windows startup , it boot 100 percent but give error. please guide me. May be due to wincc v5.1 not licensed and also tags number is 3400.
Re: [?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Tue Nov 29, 2022 5:22 pm
by CoMod
amrit wrote: ↑Tue Nov 29, 2022 5:03 pm
thank you for your reply. I prepared second desktop computer with same environment. but wincc v5.1 and protool 6.0 sp2 license keys unable to find. now step 7 v5.2 except program and responding well but wincc shown me in demo mode.
I try to boot program with windows startup , it boot 100 percent but give error. please guide me. May be due to wincc v5.1 not licensed and also tags number is 3400.
use old Siemens.exe utility for install keys for wincc v5.1
viewtopic.php?f=30&t=218
Re: [?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Tue Nov 29, 2022 10:00 pm
by amrit
Sir,
I tried but it show " Only short Keys for wincc v5.*/4.*".
So what to do?
Please reply.
Re: [?]: how to transfer step 7 V5.2 and wincc 5.1 project to other PC
Posted: Wed Nov 30, 2022 5:15 am
by CoMod
amrit wrote: ↑Tue Nov 29, 2022 10:00 pm
Sir,
I tried but it show " Only short Keys for wincc v5.*/4.*".
So what to do?
Please reply.
install Short keys from WinCC/WinCC 5/WinCC Interface folders via Seimens.exe
install
A9WRT430.ekb SIK/SIMATIC WINCC RT 64K PowerTags
or A9WRT460 from WinCC 6 folder
see
About keys for WinCC viewtopic.php?f=4&t=11415