The DOC5 ERROR

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
minhquan3004
Posts: 1
Joined: Mon Feb 17, 2020 8:33 am

The DOC5 ERROR

Post by minhquan3004 » Mon Feb 17, 2020 8:47 am

hello everybody, I'm Quan, I know this forum into some page on facebook, this is first time I up load this post, I have a problem with my PLC program. and when i run the simulation after that i change the status of I0.0 but the memory bits m0.0 not changes. and the diagnostic system said :
- DOC5 display of block stack inconsistent, because blocks were deleted/reload.
https://drive.google.com/drive/u/1/my-drive.
I hope you who have met this error can give me a method,
(suc) Thanks you, every one.

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: The DOC5 ERROR

Post by sania » Mon Feb 17, 2020 3:36 pm

cpu order number?
program and simulator version?
where are you change the input status?

Post Reply