Good day!
There is a control system based on CPU 412-5H (6ES7412-5HK06-0AB0), 6 ET200M (6ES7153-4BA00-0XB0), 2 CU320-2 (6SL3040-1MA01-0AA0) controllers for drive control and two SCALANCE controllers.
For the redundancy to work correctly, it is necessary to unite everything into a ring via the PROFINET network (MRP).
How is the network configured correctly? Or can anyone share a project under STEP 7 with a working ring for an example setup?
STEP 7 and MRP
SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
-
- Posts: 4
- Joined: Tue Nov 01, 2011 2:28 pm
Jump to
- International User Forum
- ↳ SIMATIC Automation
- ↳ SIMATIC system
- ↳ Utilites for Simatic PLC
- ↳ Siemens SIMATIC HMI
- ↳ SIMATIC HMI
- ↳ Utilites For simatic HMI
- ↳ OMRON
- ↳ OMRON PLC & HMI
- ↳ Utilites
- ↳ Allen-Bradley
- ↳ Allen-Bradley (Rockwell Automation)
- ↳ Utilites
- ↳ other PLC
- ↳ Other PLC
- ↳ Utilites
- ↳ Other HMI
- ↳ Other HMI
- ↳ Utilites
- ↳ Drivers and Inverters
- ↳ Sensors
- ↳ Industrial network
- ↳ samples
- ↳ Siemens Hardware & Software
- ↳ PLC`s Videos/Audios/Books & Over Manuals
- ↳ PLC's video
- ↳ PLC's books
- ↳ Other Books
- Russian User Forum in Russian
- ↳ Simatic (Russian)
- ↳ Simatic HMI (Russian)
- ↳ Other PLC and HMI (Russian)
- The Near-PLC Themes
- ↳ About forum , files exchangers and RULES
- ↳ Other (only about CAD and Soft)
- ↳ JOB