simatic net cp 342 -5 sf display flashing

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
Nepsuman
Posts: 2
Joined: Tue May 15, 2018 8:31 am

simatic net cp 342 -5 sf display flashing

Post by Nepsuman » Tue May 15, 2018 8:42 am

Hello there,
i am having problem with siemens simatic net(Communication Processor) cp 342-5 and its led display status indicates Sf which is constantly flashing when in run mode.Since i dont have tiaportal software to diagnose the fault..

is it the hardware fault/can it be troubleshoot by replacing new cp module
If anyone could help on this topic..
Help would be highly appreciated.
Thanks in advance

CoMod
Site Admin
Posts: 3969
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: simatic net cp 342 -5 sf display flashing

Post by CoMod » Wed May 16, 2018 6:44 am

I have 2 bad CP342-5 (2005 year) - hardware problems
Image
led display status indicates Sf which is constantly flashing when in run mode
See online diagnostic buffer

Nepsuman
Posts: 2
Joined: Tue May 15, 2018 8:31 am

Re: simatic net cp 342 -5 sf display flashing

Post by Nepsuman » Thu May 17, 2018 3:26 am

Since i dont have access to Tia portal Software so seeing online diagnostic buffer is not possible.
The only thing i could do was replace the "Old Simatic Net Cp module 6PGK7 342-5DA01- 0XE0"
with "New Simatic Net Cp module 6PGK7 342-5DA02- 0XE0".
Result: New simatic net Cp's led indication displayed Flashing BF.
(is it problem with profibus/ should i configure address of profibus slave)

Thanks in advance

Post Reply