Sinumerik 810DE problems, software needed

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
Coyote
Posts: 41
Joined: Wed Sep 06, 2006 10:07 am
Location: Slovenia

Sinumerik 810DE problems, software needed

Post by Coyote » Thu Aug 24, 2017 1:03 pm

Hi,

I have Sinumerik 810DE CCU3 SW6.4 (6FC541-0AY03-0AA1) mounted in the CCU BOX 2x25A (6FC5447-0AA01-0AA0) with infeed module SIMODRIVE 611 (6SN1146-1AB00-0BA1). The HMI is 3rd party, non Siemens, connected on Profibus port. The machine is making troubles, so I would like to spam the machine. What software do I need for this Sinumerik, I need error event list, monitor encoder positions, current, voltage of servo motors and enable signals.

I already have Simatic manager V5.5 with Sinumerik 810/840 Add-on and PC Adapter USB. I plan to use this adapter to establish connection to PG/PC via MPI port.

Dfcz
Posts: 875
Joined: Tue Dec 26, 2006 5:21 am
Location: Russia

Re: Sinumerik 810DE problems, software needed

Post by Dfcz » Sat Aug 26, 2017 5:16 pm

SimoComU

Post Reply