unable to connect to a ethernet network

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
raduadragos
Posts: 9
Joined: Mon Jan 02, 2017 10:46 am

unable to connect to a ethernet network

Post by raduadragos » Tue Jul 11, 2017 12:06 pm

Hello all, I have a problem and maybe you could help me...I want to connect to a internal network of a plc which is connected via a switch...I connected via my Ethernet connection but still I cannot see the Ethernet nodes, I changed the pg/pc interface in several way but still nothing...could you give me some tips...preferably step by step.

Lucas_Corso
Posts: 4
Joined: Mon Apr 05, 2010 8:22 pm
Location: Mexico

Re: unable to connect to a ethernet network

Post by Lucas_Corso » Tue Jul 11, 2017 7:09 pm

Sometimes, the problem is that your pc is not in the same range of IP that your PLC.
Check first this in Control Panel in your PC. For example, if your PLC has the IP: 192.168.1.20 your PC must be in same range, 192.168.1.xx

Dfcz
Posts: 875
Joined: Tue Dec 26, 2006 5:21 am
Location: Russia

Re: unable to connect to a ethernet network

Post by Dfcz » Wed Jul 12, 2017 12:34 pm

What is the axis (OS)?

AlekMalek
Posts: 39
Joined: Wed Mar 27, 2013 2:37 pm

Re: unable to connect to a ethernet network

Post by AlekMalek » Fri Dec 01, 2017 3:59 pm

The problem could be in DNS-server that conflicts with your pre-installed IP of PLC.

Post Reply