how can i crack LOGO Comfort V8

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
mrbishak
Posts: 3
Joined: Thu Oct 30, 2014 8:42 am

how can i crack LOGO Comfort V8

Post by mrbishak » Fri Jun 26, 2015 11:55 am

hi dears
i want to know that how can i crack Logo comfort v8 (demo) for original version,
or is there any download link into the web for this issue ?

thank in advanced

viewtopic.php?f=30&t=24610&p=77522&hilit=LOGO#p77522
vlad2006gr wrote:Upgrading from version 6.0 and above.
Upgrade from V6.0, install the service pack of 6.1 firstly.
http://www.automation.siemens.com/sales ... _win32.luf
http://www.automation.siemens.com/sales ... _win64.luf
Download the setup_v8_1_0_winxx.luf not on the system drive and update.
Обновление скачиваем на не системный диск, (и не в папку Logo), защита виндовс или антивирус будут мешать.

If any exception happens during upgrade please run LSC with administrator right!

xblu
Posts: 94
Joined: Tue Sep 29, 2009 12:07 pm
Location: Europe

Re: how can i crack LOGO Comfort V8

Post by xblu » Sat Jun 27, 2015 5:54 pm


os1361
Posts: 4
Joined: Sat Jan 24, 2015 8:41 pm

Re: how can i crack LOGO Comfort V8

Post by os1361 » Thu Nov 05, 2015 8:36 am

hi dear
this link in iran for download logo v8 full
http://s6.picofile.com/file/8219810100/Setup.Link_is_Dead :(
pass:plc1361
how to download
Show
Image
Image
good luck

Bibendum
Posts: 1
Joined: Fri Nov 28, 2014 7:32 pm

Re: how can i crack LOGO Comfort V8

Post by Bibendum » Thu Jul 07, 2016 8:35 am

Hello,

can't download from
http://s6.picofile.com/file/8219810100/Setup.Link_is_Dead :(

please upload last version at mirror, thanks in advance (thnx)

os1361
Posts: 4
Joined: Sat Jan 24, 2015 8:41 pm

Re: how can i crack LOGO Comfort V8

Post by os1361 » Mon Sep 05, 2016 2:36 pm

hi dear
that link is now ok
good luck

Ljmnunes
Posts: 1
Joined: Sat Mar 02, 2013 6:13 pm

Re: how can i crack LOGO Comfort V8

Post by Ljmnunes » Thu Oct 20, 2016 2:46 pm

Hi!

Just to say Thanks! I had many troubles to find a clear installation file untill now.

Grettings from Brazil!

hanpo
Posts: 1
Joined: Sat May 16, 2020 3:45 pm

Re: how can i crack LOGO Comfort V8

Post by hanpo » Wed Jun 03, 2020 12:38 pm

Hi Colleagues!

Downloaded the software from the link above, installed and everything fine!

Connected the Logo with the PC with an ethernet cable and the Soft Comfort recognizes the connection and the PLC (Network diagram shows both PC and PLC green, Connection pop up window shows the “checked” green mark showing the connection, etc.).
It even goes “Online”.

But I cannot download! The Info Window shows “PC -> Logo download” without any error message. Neither START and STOP the Logo.

I guess I am missing something but I cannot figure out what…. maybe the Soft Comfort is locked…

Any suggestion?

Thanks in advance!

bernards6
Posts: 2
Joined: Mon Jun 20, 2016 7:03 am

Re: how can i crack LOGO Comfort V8

Post by bernards6 » Mon Jun 28, 2021 12:03 pm

Hi, Having same issue, did you manage to download ?

MaxS
Posts: 59
Joined: Sat May 17, 2014 1:26 am

Re: how can i crack LOGO Comfort V8.3

Post by MaxS » Tue Jun 29, 2021 5:16 am

1. Download and extract archive: https://my-files.su/94qs7h

2. Download software upgrade from Siemens website for your Windows (x32 or x64): https://support.industry.siemens.com/cs ... 0&lc=en-WW and install Setup.exe.

3. When will be request "Please Choose the folder where DVD stored in" skip this step by click Next.

Image

4. When will be request "Please Choose the folder including the main version:" click Choose... and specify the path to the extracted in step 1 folders Previous Versions/Previous_Version_win32 or Previous Versions /Previous_Version_win64.

Image

5. Then follow the installation instructions.

Good Luck!

Post Reply