Help Siwarex WP 321 Step7 V5.5 SP4

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
ciberziggy
Posts: 4
Joined: Mon Apr 13, 2015 10:21 am

Help Siwarex WP 321 Step7 V5.5 SP4

Post by ciberziggy » Wed May 13, 2015 12:14 pm

Hello I,m new in this fórum (nuser) :
I need help to programing in step7 V5.5 SP4 the program to see The weight of Siwarex and to configure this. I have a plc and ET200SP mount the Siwarex WP 321. I have the harware configurated and the plc and ET200SP with Siwarex comunicating and running. I have the manual of Siwarex and the siemens program example but I don´t understand the funcionament. The descharges that I see in this fórum dónt run.

PLEASE HELP ME because i need to start the instalation now. Than you

Ciberziggy

Answers to FAQs
Faq & Info
Faq & Info
Posts: 70
Joined: Thu Oct 13, 2005 6:42 pm
Location: Frequently Asked Questions – Часто Задаваемые Вопросы

Re: Help Siwarex WP 321 Step7 V5.5 SP4

Post by Answers to FAQs » Wed May 13, 2015 5:40 pm


ciberziggy
Posts: 4
Joined: Mon Apr 13, 2015 10:21 am

Re: Help Siwarex WP 321 Step7 V5.5 SP4

Post by ciberziggy » Mon Jun 15, 2015 8:34 am

Thank you very much:
Finally i put running the Siwarex and i see the weight in the plc.

Ciberziggy

Post Reply