Siemens Touch Screen & CNC machine

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
omar zedan
Posts: 178
Joined: Sat Oct 22, 2011 7:12 am

Siemens Touch Screen & CNC machine

Post by omar zedan » Mon Nov 24, 2014 4:33 pm

Dear All
I face cnc machine they use seimens touch screen and just ET200 IO and there is no cpu
they put the touch screen inside a closed box and I can not recognize its type.
can any one help me by explain what this system called?
Is it siemens embedded system?
Can you guide me about the softwares needed in this project?
Thanks in advance

s_hussain2k
Posts: 19
Joined: Tue Jan 31, 2012 8:14 am

Re: Siemens Touch Screen & CNC machine

Post by s_hussain2k » Tue Nov 25, 2014 3:23 am

Can you post the pics of the system if possible?

cmos
Posts: 23
Joined: Thu May 21, 2009 4:52 pm
Location: Europe

Re: Siemens Touch Screen & CNC machine

Post by cmos » Tue Nov 25, 2014 6:53 pm

Probably there are servo drives like Emerson (former control techniques) or ELAU let's say, that can run code in a special language like ANSI C. They have servo drive CPU that use ET200 for more IO interface and touch panel for HMI. It is very common this. A PLC CPU is not recommended because is slower in response than the previous solution.

Post Reply