Hi, i have a CPU S7-315 2DP (6ES7 315-1AF03-0AB0 ).
I upload project from CPU then replace a new memory card 6ES7 951(left).
When i download this project to CPU but I can not view CPU (I use PC adapter and CP5611).
Who can help me?
[?]: Problem when download program to PLC S7-315
Re: [?]: Problem when download program to PLC S7-315
Setting MPI in HWConfig ?
and Setting PG/PC interface
Open the dialog via "Start > Settings > Control Panel > Set PG/PC interface".
http://www.mii.cz/art?id=160&lang=409
"Copy RAM to ROM..." function ?
http://support.automation.siemens.com/W ... n/15389520
and Setting PG/PC interface
Open the dialog via "Start > Settings > Control Panel > Set PG/PC interface".
http://www.mii.cz/art?id=160&lang=409
"Copy RAM to ROM..." function ?
http://support.automation.siemens.com/W ... n/15389520
Re: [?]: Problem when download program to PLC S7-315
Thanks.
But Program was uploaded ok
but download faile
But Program was uploaded ok
but download faile
Re: [?]: Problem when download program to PLC S7-315
Memory reset?
what leds status on your cpu?
what leds status on your cpu?
Re: [?]: Problem when download program to PLC S7-315
When i Insert new memory card, All Led went light