upload simotion d425 and cf card problem

[mario_ingen]

connection online ok with scout
I have not the original project online by ethernet and profibus not lose the whole project achievement. sinamics_integrated1 message me offline and download the program does not download "i / o device variables"

upload al pg only a part of D425
I have installed v4.3 scout

will I need a 5611 for example? and I communicate by the Profibus interface of the plc s7 and reaches a maximum speed of 1.5 Mbps and sinamics integated speed 20 Mbs
I have not the original project
maybe if I put the cf card in some adapter and make a picture of the data and then picked him up from the simotion scout?
there any adapter to read the cf card?
clarify pg I download the data but not the variables axles .......

[sania]

no any way
simotion not provided upload project
only basic modules (not program,cams, I/o,etc..)

[mario_ingen]

so if I have to change an engine module sinamics and that I have to respuesto is different as hardware change in the program??.
I have no way to do this without the program that is in the simotion d425??

[sania]

i not checked it.i think no,but you can try:
copy entry of your cf-card with standart windows command copy/paste
change module & check if all ok
if not, copy back files of cf-card

P.S. what module you want change?
you don`t need download if use same module

[ciccio]

If who download the program the first time made a full download you can upload everything, otherwise not.

if you have to change the d425 you can just move the cf card to the new one