Ethernet in communication profilbus

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
Post Reply
Crikos
Posts: 1
Joined: Sat Sep 21, 2013 3:18 am

Ethernet in communication profilbus

Post by Crikos » Sun Sep 22, 2013 3:25 am

I am needing an exit ethernet in an application with s7 CPU 412, with remote ET200 saw profilbus, which the best way to have a point ethernet?
Top
dsekulic
Posts: 186
Joined: Sun Feb 12, 2006 5:47 pm
Location: Europe

Re: Ethernet in communication profilbus

Post by dsekulic » Sun Sep 22, 2013 9:46 am

Hi,
If You want to use ET200 on Profibus it depend on which type of ET200 You will use. You have ET200S, ET200M, ET200SP for installation in control cabinet or ET200eco and ET200pro for installing outside of control cabinet. You will need Interface module for Profibus for each extension and I/O modules. Best way is to take a look here:
http://support.automation.siemens.com/W ... 255/133200
regards
Top
Post Reply

Return to “SIMATIC system”