[?+]: CPU 314C-2DP goes to stop when MMC is inserted

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
Post Reply
amit
Posts: 53
Joined: Thu Apr 23, 2009 2:12 pm
Location: India

[?+]: CPU 314C-2DP goes to stop when MMC is inserted

Post by amit » Wed Sep 11, 2013 7:32 pm

Dear Friends ,
I have CPU 314C-2Dp. Its stop LED flashes slowly when MMC is inserted into it. I have chacked same MMC working fine on other CPU. Further When MMC is inserted there is no communication between PC and CPU but if you remove MMC then CPU goes online. Please give solution.

Regards

Amit
Top
Info
Faq & Info
Faq & Info
Posts: 425
Joined: Wed Oct 05, 2005 9:00 am

Re: CPU 314C-2DP goes to stop when MMC is inserted

Post by Info » Wed Sep 11, 2013 7:46 pm

(sfaq) How do you reset a SIMATIC S7-300 CPU and MMC (default reset or overall reset)?
http://support.automation.siemens.com/W ... n/29801950
Top
amit
Posts: 53
Joined: Thu Apr 23, 2009 2:12 pm
Location: India

Re: CPU 314C-2DP goes to stop when MMC is inserted

Post by amit » Wed Sep 25, 2013 1:26 pm

Thank you very much. Solution worked fine .

Amit
Top
Post Reply

Return to “SIMATIC system”