[?]: Problem to run the visualization program MP277 FWX file

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
isteak007
Posts: 93
Joined: Wed Jul 14, 2010 10:23 am
Location: Bangladesh
Contact:

[?]: Problem to run the visualization program MP277 FWX file

Post by isteak007 » Thu Aug 15, 2013 7:04 am

I have a MP277 8" Touch, The problem is it is unable to run the visualization program FWX file,

i tried some test runtime program (FWX) file but
WinCC runtime 2008 is unable to run any fwx file.

it is showing "Please wait until runtime has been terminated"

The Machine is stopped for more than 4 years, Now my company wants to run the machine.

I already update the OS via Prosave but still same problem.

MP277 is connected to S7-300 via Ethernet

Device: MP277 8" Touch
Image: V01.01.04.00_01.16
Bootloader: 1.02
Windows CE v5.0

if anyone can help it will be much appreciated

Info
Faq & Info
Faq & Info
Posts: 402
Joined: Wed Oct 05, 2005 9:00 am

Re: [?]: Problem to run the visualization program MP277 FWX

Post by Info » Thu Aug 15, 2013 7:47 am


isteak007
Posts: 93
Joined: Wed Jul 14, 2010 10:23 am
Location: Bangladesh
Contact:

Re: [?]: Problem to run the visualization program MP277 FWX

Post by isteak007 » Sat Aug 17, 2013 4:26 pm

I think, The touch panel is defective.
We already order one. but it will take time.

So i tried to run the fwx file via WinCC Flexible Runtime software installed on my laptop.

But i am unable to communicate with the PLC (S7-300) via PC adapter (MPI) Cable.

Can anyone help me how can i do that? or configure it?

Image

Homeroid_BL
Posts: 252
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: Problem to run the visualization program MP277 FWX

Post by Homeroid_BL » Sat Aug 17, 2013 7:53 pm

Set in PG/PC to be Access point: Step7ONLINE - > PC adapter.
Adjust Baudrate and addresses.

Post Reply