[?]: When Set PG/PC interface for Windows 64bit

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
singleperson
Posts: 118
Joined: Fri May 07, 2010 9:46 am

[?]: When Set PG/PC interface for Windows 64bit

Post by singleperson » Wed Jan 18, 2012 11:36 am

Dear All,

Does anybody help me?

I install successfully but I can not connect to PLC because set PG/PC interface for Windows 64bit is not suitable.

Hic hic,

Please help me.

Info
Faq & Info
Faq & Info
Posts: 425
Joined: Wed Oct 05, 2005 9:00 am

Re: set PG/PC interface for Windows 64bit

Post by Info » Wed Jan 18, 2012 12:38 pm

ReRead ReadMe file
Image

longsoul
Posts: 11
Joined: Mon Sep 27, 2010 4:57 pm

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by longsoul » Thu Jan 19, 2012 2:29 pm

Set PG / PC Interface works on my Win7 x64 Pro!

What program are you using? Step7 Manager, TIA, Step7 MicroWin?
What interface?

singleperson
Posts: 118
Joined: Fri May 07, 2010 9:46 am

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by singleperson » Sat Jan 21, 2012 11:04 pm

Hi Sir,

I use Windows 7 Home & Step 7 v5.5
Does PG/PC Interface have support this Windows Version?

CoMod
Site Admin
Posts: 3969
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by CoMod » Sun Jan 22, 2012 7:59 am

singleperson wrote:Hi Sir,

I use Windows 7 Home & Step 7 v5.5
Does PG/PC Interface have support this Windows Version?
ReInstall Step 7 v5.5 and show your screenshots

J0sa
Posts: 1
Joined: Thu May 20, 2010 2:41 pm

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by J0sa » Tue Jan 24, 2012 12:59 pm

You need MS Windows 7 64 bit Ultimate, Professional or Enterprise (Standard installation). STEP7 don´t support Windows home edition.

DiVan
Site Admin
Posts: 127
Joined: Mon Aug 15, 2011 2:27 pm

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by DiVan » Tue Jan 24, 2012 1:26 pm

J0sa wrote:You need MS Windows 7 64 bit Ultimate, Professional or Enterprise (Standard installation). STEP7 don´t support Windows home edition.
Really ?
:wink:
Image Image Image
============ How to Install your Step7 to Windows 7 Home Edition ===============
CD1\Setups.ini
Go to [OS] section
and insert ; before Win7x64Exclude and Win7Exclude

Code: Select all

Win7=1
;Win7Exclude=SKU2;SKU3;SKU5;SKU8;SKU9;....
Win7Warning=SKU8;SKU9;SKU10;SKU12;SKU13;SKU14;SKU15;SKU16;SKU17;SKU18;SKU20;SKU21;SKU22;SKU23;SKU24;SKU25
Win7x64=1
;Win7x64Exclude=SKU2;SKU3;SKU5;SKU8;SKU9;...

singleperson
Posts: 118
Joined: Fri May 07, 2010 9:46 am

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by singleperson » Mon Aug 13, 2012 8:08 am

HI my friend,

I use cable USB --> RS485 to connect with S7-200. But it's not successful. ( Windows 7 Pro - 64bit)
I try to connect it in Windows XP. It works normally.

Please give me your advice. thanks

tran_hieu0983
Posts: 7
Joined: Mon Jan 03, 2011 7:31 pm

Re: [?]: When Set PG/PC interface for Windows 64bit

Post by tran_hieu0983 » Sat Sep 22, 2012 6:30 am

I think with Step 7 Microwin, should be used SP9 that ok with Programming. Because. SP8, Sp7... you can install but can't be programming.
============ How to Install your Step7 to Windows 7 Home Edition ===============
CD1\Setups.ini
Go to [OS] section
and insert ; before Win7x64Exclude and Win7Exclude
Can be install but Programming be error. (not_allow)

But thank all about (gpost)

Post Reply