[?]: RS232/PPI multimaster cable connection setup TP177

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
jaypz23
Posts: 4
Joined: Wed Feb 16, 2011 9:54 am

[?]: RS232/PPI multimaster cable connection setup TP177

Post by jaypz23 » Fri Dec 16, 2011 1:57 am

hello everyone.

hope u can help me with this...
i cant establish connection between my laptop to a siemens TP177 micro, using the following setup:
tp 177 micro was connected to rs232/ppi multimaster cable
since my laptop dont have embedded serial port i used a serial to usb adapter (brand: prolific)
i setup the PG/PC interface to connect through PC/PPI cable
then i tried to donwload the program by rs232/ppi multimaster cable setup using the serial port of usb to serial adapter (prolific)
the last line from the commandline says "time out error while sending files"

im doing this setup on windows 7 pro os.
im not sure if the problem is in the setup, cables or the softwares and os..
hope u can help with this..

filisteo
Posts: 2
Joined: Wed Dec 28, 2011 4:02 am
Location: Spain

Re: [?]: RS232/PPI multimaster cable connection setup TP177

Post by filisteo » Wed Dec 28, 2011 7:10 pm

Hi;

See this document and verify that your "cable" is compatible with the HMI device.

http://cache.automation.siemens.com/dnl ... V1_2_e.pdf

Remember that switch 5 must be "0".

Bye

emulefan
Posts: 27
Joined: Sat Feb 10, 2007 3:19 pm
Location: Argentina

Re: [?]: RS232/PPI multimaster cable connection setup TP177

Post by emulefan » Wed Dec 28, 2011 10:23 pm

The problem is your USB adapter. The Prolific chipset doesn´t work with SIEMENS cables. You need a FTDI chipset adapter like the Marson MT-609-2.

Regards

gregar
Posts: 116
Joined: Fri Apr 20, 2007 1:44 pm
Location: Europe

Re: [?]: RS232/PPI multimaster cable connection setup TP177

Post by gregar » Sat Dec 31, 2011 9:14 am

Hi,

The best decision for the laptop without a serial port is to buy in addition Express Card or PCMCIA Serial port RS232. These Cards are hardware realisation Serial port RS232, instead of program emulation as adapters USB-RS232. After that you forget about problems and compatibility questions.

For example, look at this:

http://www.synchrotech.com/products-exp ... er_01.html

jaypz23
Posts: 4
Joined: Wed Feb 16, 2011 9:54 am

Re: [?]: RS232/PPI multimaster cable connection setup TP177

Post by jaypz23 » Mon Jan 02, 2012 7:05 am

hi all!

thanks for the replies,
what i did was replaced the rs232/ppi multimaster cable to USB to MPI PC adapter cable.
and setup the system to an mpi network.
my problem now is that when i try to view the s7200 plc on my laptop through Micro/win communication
the search takes too long to detect the plc and it says "UNKNOWN"
http://www.facebook.com/photo.php?fbid= ... =1&theater

i tried to connect directly to the plcs and the problem remains still.
so the issue must be in my software or in my configuration.

here are the program installed.
Step7 v5.5
Step7 Micro/Win SP7
Wincc Flexible 2008 SP2

On a windows xp sp3 desktop

i hope u can help me with this.

Post Reply