[?]: CP 5512 Problem witch Profibus

[bhole1]

Hi all

Im have one problem. Im have CP 5512 and HW adapter.
http://www.imageupload.org/?d=04220EA01


And cable
http://www.imageupload.org/?d=0D8258821

Sometimes I do not know why but it happens when I come to the PLC and only connecting to a connector on the network is now Bus Fault. Where will it be? Not only does not set the connect cable.

Thank you for answer

[CoMod]

It is possible.
network length ?
number of devices ?

1. check terminator switches - at ends must be ON
2. connect to second (free) interface (for example to MPI)

[bhole1]

Im have 25PLC network on 20 conect standar not problem
only 5 just plug cable and inscriptions BF. I only 5 just plug cable and inscriptions BF.

Terminator is ok.one is to join the peripheral or the PLC is still useful BF.
Conect MPI or other peripheral is it certainly BF.