[?]:Sinamics - Usiing r0485 Encoder data i PLC

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
Post Reply
Nedjeljko
Posts: 118
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

[?]:Sinamics - Usiing r0485 Encoder data i PLC

Post by Nedjeljko » Mon Aug 08, 2011 11:56 pm

Hi to all,

I have 6 of SINAMICS G120 CU240S DP and also each motor has own encoder.
Ive been adjusted in the PLC to read out Encoder counter value r0485. Now I must to use this parameter to make some logic for control movement on the x-ase of my motors.
Is anyone here expirienced with encoder programing in the PLC? I think that using Encoder data on this way is very similar with the Encoder connected to the Encoder card on the PLC.
I will be thankful to anyone who have some example how to do it (sos)

Thanks in advance
Top
Nedjeljko
Posts: 118
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

Re: [?]:Sinamics - Usiing r0485 Encoder data i PLC

Post by Nedjeljko » Fri Aug 12, 2011 3:40 am

I made it... (suc) (suc) (suc) (suc) (suc)

Now just need to make some calculations about how many m/1000pulses i have on the x-ase.

Anyone have some idea and suggestion how to make calculation?
Top
Post Reply

Return to “SIMATIC system”