[Request]: Step5 V6.x software

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
segaauto
Posts: 33
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

[Request]: Step5 V6.x software

Post by segaauto » Tue Oct 12, 2010 6:15 am

Hi I need the Step5 V6.x software
can somebody help me

In advance Thanks

Daniel_Brasil
Posts: 18
Joined: Thu Oct 28, 2010 11:29 pm
Location: Brasil

Re: Request: Step5 V6.x software

Post by Daniel_Brasil » Sun Oct 31, 2010 11:58 am

Hello segaauto,

The STEP5 V7.23 don´t work for you?


Bests regards,
Daniel

segaauto
Posts: 33
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Mon Nov 08, 2010 11:54 pm

No it has to be a version lower tan 7.0

I need to run comm521 basic ver 1.2 and it only runs in Ver 6.X

Thanks.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Thu Nov 11, 2010 8:56 pm

Try this (STEP 5 V6.5), I just uploaded it.
https://mega.nz/#F!ha4gmKzY!DmtQsTp-nXhl2wIznvbzdQ
3.5 MB
Good luck... :mrgreen:

segaauto
Posts: 33
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Sun Nov 14, 2010 4:40 am

Thank you 3Mendo Iinstalled and is running good.

Thanks a lot.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Sun Nov 14, 2010 12:40 pm

segaauto wrote:Thank you 3Mendo Iinstalled and is running good.

Thanks a lot.

segaauto
You're welcome!

Marcio26
Posts: 3
Joined: Mon Jul 26, 2010 4:24 pm

Re: [LINK]: Step5 V6.x software

Post by Marcio26 » Sat Oct 15, 2016 8:01 am

Can you upload it again please?

Shaktalv
Posts: 1
Joined: Fri Nov 11, 2016 8:41 am

Re: [Request]: Step5 V6.x software

Post by Shaktalv » Wed Nov 16, 2016 7:07 am

Please, I need too. Thanks

Post Reply