[?+]: Change "OK"-"not OK" bitmaps in hardware config

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
Scarch
Posts: 101
Joined: Fri Aug 31, 2007 8:17 pm
Location: Europe

[?+]: Change "OK"-"not OK" bitmaps in hardware config

Post by Scarch » Wed Sep 29, 2010 9:47 am

This is a strange question... :roll:

When you open the hardware configuration and go on-line, a small picture appears on the top left side of the original bitmap of the device. There are 2 bitmaps (OK and not OK), as in the attached picture. How can I edit such bitmaps or whatever they are, where are them?

Image

Dreadnoult
Posts: 12
Joined: Thu Jan 28, 2010 5:15 am
Location: Russia, Sakhalin Island

Re: OK-not OK bitmaps in hardware config

Post by Dreadnoult » Thu Sep 30, 2010 3:14 am

It is really strange question. If it's not a secret, for what purpouse?

narkom
Posts: 43
Joined: Wed Dec 13, 2006 11:58 am
Location: Russia

Re: OK-not OK bitmaps in hardware config

Post by narkom » Thu Sep 30, 2010 7:02 pm

You can find it in resources of this DLL => C:\Program Files\Siemens\Step7\S7BIN\p7vr15ab.dll

Best regards!

Scarch
Posts: 101
Joined: Fri Aug 31, 2007 8:17 pm
Location: Europe

Re: OK-not OK bitmaps in hardware config

Post by Scarch » Thu Sep 30, 2010 9:13 pm

Thanks! I will start playing with that library.
What I want is to change the small image and colours, nothing else. I have more than 60 stations in the hardware config and find difficult to look at them when there is some fault. I want 3 colours (green, red and grey). Green for OK, red for not OK and grey for not possible to check (for example, when the stations hang from a DP master on a CP342-5)

Scarch
Posts: 101
Joined: Fri Aug 31, 2007 8:17 pm
Location: Europe

Re: OK-not OK bitmaps in hardware config

Post by Scarch » Fri Oct 01, 2010 12:33 pm

No, I don't have such file!!!

Schtiel
Site Admin
Posts: 1100
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Re: OK-not OK bitmaps in hardware config

Post by Schtiel » Fri Oct 01, 2010 8:00 pm

Scarch,
try s7hnamex.dll (icon groups 119-121):

Image

Scarch
Posts: 101
Joined: Fri Aug 31, 2007 8:17 pm
Location: Europe

Re: [?]: OK-not OK bitmaps in hardware config

Post by Scarch » Mon Oct 04, 2010 7:22 am

Much better now... Thank you!


Image

Michel1972
Posts: 9
Joined: Tue Oct 18, 2005 2:39 pm
Location: Europe

Re: [?+]: Change "OK"-"not OK" bitmaps in hardware config

Post by Michel1972 » Tue Oct 19, 2010 12:27 pm

Where can i find this program for change the "dll"?

Michel

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: Change "OK"-"not OK" bitmaps in hardware config

Post by Linkinx64 » Tue Oct 19, 2010 1:39 pm

Michel1972 wrote:Where can i find this program for change the "dll"?

Michel
Many such programs. It calls resource editors.
For example this: http://www.restuner.com/

Post Reply