[?]: find project password wincc flexible

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
gomoura
Posts: 43
Joined: Mon May 04, 2009 4:32 pm
Location: America

[?]: find project password wincc flexible

Post by gomoura » Tue Oct 20, 2009 7:14 pm

Good afternoon
Would have an option to find project password winccflexible it starts to ********

sania
Site Admin
Posts: 1190
Joined: Sat Aug 13, 2005 6:15 am

Re: winccflexible

Post by sania » Tue Oct 20, 2009 8:14 pm

if you have RC-project - go to administration - change for any password & enjoi

gomoura
Posts: 43
Joined: Mon May 04, 2009 4:32 pm
Location: America

Re: [?]: find project password wincc flexible

Post by gomoura » Wed Oct 21, 2009 1:52 pm

I would like to find out the password

sania
Site Admin
Posts: 1190
Joined: Sat Aug 13, 2005 6:15 am

Re: [?]: find project password wincc flexible

Post by sania » Wed Oct 21, 2009 8:09 pm

you have RC-project or not??????
into RC-project directory find file with name ~ PROJECT_1_{{e3a0c91a-bb2f-40ef-adfc-778067cdc010}}.data
open it with notepad,find your username
Image

gomoura
Posts: 43
Joined: Mon May 04, 2009 4:32 pm
Location: America

Re: [?]: find project password wincc flexible

Post by gomoura » Thu Oct 22, 2009 12:02 am

ok thanks I will try, if not the project would have to find

siavashhn
Posts: 22
Joined: Sun Aug 24, 2008 9:13 am
Location: Iran

Re: [?]: find project password wincc flexible

Post by siavashhn » Sat Oct 24, 2009 5:27 pm

By RC you mean "Reference Configuration" ? (Maybe Release Candidate)
and i've looked in the S7PRJ folder where i unzip my projects. there was no file such as the name you have mentioned.

ciwa
Posts: 143
Joined: Fri Aug 25, 2006 3:50 pm
Location: Indonesia

Re: [?]: find project password wincc flexible

Post by ciwa » Mon Oct 26, 2009 5:45 am

look in the S7PRJ folder/HMIES

siavashhn
Posts: 22
Joined: Sun Aug 24, 2008 9:13 am
Location: Iran

Re: [?]: find project password wincc flexible

Post by siavashhn » Mon Oct 26, 2009 12:54 pm

After Running the generate command, this file was created.
So you have to generate this file, using the generate command in WinccFelxible: Project>Compile>Generate

Post Reply