Search found 114 matches

by leofarhan
Wed Feb 23, 2011 9:06 pm
Forum: Other PLC
Topic: [?]: Quantum 140CPU67160 ModBus Port Pinouts
Replies: 2
Views: 2441

Re: [?]: Quantum 140CPU67160 ModBus Port Pinouts

Thanks Schtiel for your reply.

Best Regards

Leo-Ali
by leofarhan
Wed Feb 23, 2011 9:01 pm
Forum: Other PLC
Topic: [?]: Quantum Unity Hotstandby PLC-B goes to halt
Replies: 8
Views: 3721

[?]: Quantum Unity Hotstandby PLC-B goes to halt

Hello, I am facing a prolem in Quantum Unity Hotstandby 140CPU67160. Both the controllers have same logic, the PLC-A execute the logic perfectly, while when PLC-B is Primary it goes to halt within 12-15 hours with stop code 8190. And the reason of the halt in the PLC Diagnostic View is Watchdog over...
by leofarhan
Sat Feb 19, 2011 9:26 pm
Forum: Other PLC
Topic: [?]: Quantum 140CPU67160 ModBus Port Pinouts
Replies: 2
Views: 2441

[?]: Quantum 140CPU67160 ModBus Port Pinouts

I need the pinout connection for the cable connecting PC Port (DB9 Connector) to ModBus Port RS232 (RJ45 Connector) in Quantum Unity 140CPU67160 PLC.

Kindly send the Pinout connection diagram.

Best Regards

Leo-Ali
by leofarhan
Mon Feb 07, 2011 8:33 am
Forum: Other HMI
Topic: [Request] Switch to Vijeo Citect
Replies: 0
Views: 1338

[Request] Switch to Vijeo Citect

Hello,

I need the tool "Switch to Vijeo Citect" for conversion of the application from Factory Link Software to Vijeo Citect Software.
My application contains 88 Pages and aroung 12000 variables, therefore it is requested to provide a crack version of "Switch to Vijeo Citect"

Best Regards

Leo-Ali
by leofarhan
Sat Jan 01, 2011 7:58 pm
Forum: Other HMI
Topic: [?]: crack for vijeo designer v5.0 ?
Replies: 1
Views: 2765

Re: [?]: crack for vijeo designer v5.0 ?

Hello,

You can find the crack for Vijeo Designer V5.0 & V5.1 in the following previously posted links.

viewtopic.php?f=46&t=10295

viewtopic.php?f=43&t=12482

Best Regards

Leo-Ali
by leofarhan
Mon Dec 27, 2010 8:53 am
Forum: Other PLC
Topic: Schneider Distributed I/O selection for 20Km distance
Replies: 0
Views: 1032

Schneider Distributed I/O selection for 20Km distance

Hello! We need to use 33-distributed I/Os scatered in the field having cable length of 20Km (Approx) from first to last drop. The solution must be based on Schneider-Electric equipment with some third party products. Cost effective solution is require based on redundant connecting media. I am thinki...
by leofarhan
Wed Dec 22, 2010 6:33 am
Forum: Other HMI
Topic: Request: PowerLogic ION ENTERPRISE
Replies: 0
Views: 1462

Request: PowerLogic ION ENTERPRISE

HEllo All!

PowerLogic ION ENTERPRISE is required, Kindly upload.

Regards
Leo-Ali
by leofarhan
Tue Nov 23, 2010 7:29 pm
Forum: Other PLC
Topic: [?]: need info about PLC TSX PREMIUM TELEMECANIQUE
Replies: 4
Views: 4455

Re: information about PLC TSX PREMIUM TELEMECANIQUE

Hello! There are two type of Premium Processors and hence the softwares. 1. PL7 Processor and PL7 Junior or PL7 Pro Software is required for it. 2. Unity Processor and Unity Pro M or XL Software is required. For the PL7 Processor, it has a mini-din connector RS485 port and need to converters. Schnei...
by leofarhan
Tue Nov 23, 2010 8:02 am
Forum: Other HMI
Topic: [?]: How to use Coloured Dot Matrix Printer in SCADA
Replies: 0
Views: 1404

[?]: How to use Coloured Dot Matrix Printer in SCADA

Hello! We need to use a coloured dot matrix printer as event printer, the alarms shall be printed in red and normal events in black. If anyone have used this type of scheme before in any SCADA software such as PcVue, CITECT, etc. Kindly advise. The Printer Information is; Make: OKI Data (OKI Printer...
by leofarhan
Sun Nov 21, 2010 8:36 pm
Forum: Other PLC
Topic: [LINK]: ABB relays PCM600 Engineer Pro with IEC61850
Replies: 31
Views: 46063

Re: Request: abb relays PCM600 Engineer Pro with IEC61850

Hello,

Download the PCM600 from Link_is_Dead :(/432287980/PCM600.iso

I need ABB Testing Software for IEC61850. There are two software.
ITT600 SA (Commercial)
ITT SA Synchronizer (For ABB Internal Use)

Kindly upload, if you have.

Regards

Leo-Ali
by leofarhan
Mon Nov 01, 2010 12:11 am
Forum: Other PLC
Topic: [?]: Quantum Unity 140CPU67160 Stop Codes
Replies: 0
Views: 1374

[?]: Quantum Unity 140CPU67160 Stop Codes

Hello!

The Quantum Unity PLC 140CPU67160 goes to halt without any reason and gives stop code 8190.
Kindly update stop codes for Quatum Unity PLC 140CPU67160.

Regards
by leofarhan
Sun Oct 17, 2010 12:23 am
Forum: Other PLC
Topic: Request: ABB ITT SA Synchronizer
Replies: 4
Views: 3338

Request: ABB ITT SA Synchronizer

Hello,

I need ABB Testing Software for IEC61850. There are two software.
ITT600 SA (Commercial)
ITT SA Synchronizer (For ABB Internal Use)

If anyone have any of these two software, kindly upload.

Regards

Leo-Ali
by leofarhan
Fri Sep 24, 2010 4:01 pm
Forum: Other HMI
Topic: [?]: Time Synchronization via GPS Clock
Replies: 0
Views: 1512

[?]: Time Synchronization via GPS Clock

Hello,

I have to use HOPF GPS clock in a project, can anyone tell me how can I configure PC to Synchronize with GPS Clock.

Regards

Leo-Ali
by leofarhan
Thu Aug 12, 2010 1:35 am
Forum: Other (only about CAD and Soft)
Topic: Request: Fire Tube Boiler Sample Drawings
Replies: 0
Views: 1690

Request: Fire Tube Boiler Sample Drawings

Hello!

I need sample Electrical & Control drawings of Fire Tube Boilder, Hope someone will help me.

Regards

LEO-ALI
by leofarhan
Wed Aug 11, 2010 7:18 pm
Forum: Other HMI
Topic: Request: Dream Report
Replies: 0
Views: 2166

Request: Dream Report

Hello!

I need dream report software along with crack for development.
Hope you will send me soon, if you have.

Regards

LEO-ALI
by leofarhan
Thu Aug 05, 2010 9:00 am
Forum: Other PLC
Topic: [?]: Unity Pro - How to Compare Logic of two applications
Replies: 8
Views: 8908

[?]: Unity Pro - How to Compare Logic of two applications

Hello!

Can anyone tell me how to compare application logic of the PLC program either in Ladder or ST or anyother language using Unity Pro XL V4.0?

Lookg forward for your reply.

Regards

Leo-Ali
by leofarhan
Tue Jun 15, 2010 5:26 am
Forum: Other PLC
Topic: Communication among Quantum Unity, Omron PLC & Siemens Power
Replies: 0
Views: 1474

Communication among Quantum Unity, Omron PLC & Siemens Power

Hello all! I need to communicate Quantum Unity PC with Omron PLC on Ethernet TCP/IP and Siemens Power Meters/Energy Analyzers on Profibus. For profibus Schneider Electric Offer Profibus slave communication card in collobration with ProSoft, I would like to confirm can we communicate Energy analyzer ...
by leofarhan
Tue Apr 20, 2010 7:13 pm
Forum: Other PLC
Topic: [?]: How to read Quantum Unity status registers %S?
Replies: 0
Views: 1472

[?]: How to read Quantum Unity status registers %S?

Hi All! I need to read the system bits & words (from Quantum Unity Hotstandby PLCs) at my SCADA/HMI using ModBus TCP/IP protocol without moving system registers to memory registers. I think so it is possible, because I have read the status registers of TWIDO PLC in the XBTGT using ModBus TCP/IP. The...
by leofarhan
Tue Apr 20, 2010 4:29 pm
Forum: Other PLC
Topic: [?]: Logic execution in Quatum Unity PLC?
Replies: 0
Views: 1260

[?]: Logic execution in Quatum Unity PLC?

Hi ALL! Could anyone explain how logic execute in Quantum Unity PLC? and how to calculate the execution time of over all program logic. For an application I have 20msec to generate output, after recieveing particular input. But I dont know how much time my logic will take? Further I would like to co...
by leofarhan
Sun Mar 07, 2010 8:10 pm
Forum: Other HMI
Topic: [Reques] HMI Reporting Software
Replies: 0
Views: 1706

[Reques] HMI Reporting Software

Dear Friends,

Kindly upload the HMI Reporting software with crack/keygen, like dream report.

Regards

LEO-ALI
by leofarhan
Sat Mar 06, 2010 7:32 pm
Forum: Other HMI
Topic: [Request] Switch to Vijeo Designer "S2VD"
Replies: 14
Views: 19174

Re: [Request] Switch to Vijeo Designer "S2VD"

Thanks Schtiel & Dustin
by leofarhan
Sat Feb 20, 2010 4:31 pm
Forum: Other HMI
Topic: Request: IEC61850 Simulator Server Required
Replies: 0
Views: 1673

Request: IEC61850 Simulator Server Required

Hello All!

I need a simulation server for IEC61850 protocol, to check the communication between SCADA & OPC Server for an specified Relay, using Relay icd file.

Kindly upload, if anyone have.

Regards

LEO-ALI
by leofarhan
Fri Feb 12, 2010 11:16 pm
Forum: Other (only about CAD and Soft)
Topic: Request: SIEMENS SPP SINCAL
Replies: 0
Views: 1877

Request: SIEMENS SPP SINCAL

Dear Friends,

I need SIEMENS Calculation Software called SINCAL, if you have kindly upload it for me.

It is a part of SIEMENS SPP(R) Product Suite.

Regards

LEO-ALI
by leofarhan
Fri Feb 12, 2010 10:39 pm
Forum: Other PLC
Topic: [?]: Migration from Siemens S5 to Modicon Quantum ?
Replies: 0
Views: 1270

[?]: Migration from Siemens S5 to Modicon Quantum ?

Dear Friends,

We would like to replace the old siemens S5 system with the Schneider Modicon quantum Unity System.
Therefore I would like to ask, is there any way to convert S5 Application to Quantum Unity application.

Regards

Leo-Ali
by leofarhan
Fri Feb 12, 2010 5:57 pm
Forum: SIMATIC system
Topic: Required: SINCAL / ETAP Software
Replies: 0
Views: 1543

Required: SINCAL / ETAP Software

Dear Friends,

I need SIEMENS Calculation Sfotware called SINCAL, if you have kindly upload it for me.

If you can also provide ETAP 6.0, I shall remain thankful.

Regards

LEO-ALI
by leofarhan
Fri Jan 29, 2010 12:08 pm
Forum: SIMATIC system
Topic: [?]: Siemens S7-300 Selection for very simple process
Replies: 1
Views: 2332

[?]: Siemens S7-300 Selection for very simple process

Hello! I am new user of SIMATIC, while I have worked a lot on Modicon, Schneider PLCs. I have to select a PLC SIMATIC S7-300 with two Touch Screens, One screen will be on the same panel, and other will be far away. The PLC should have the following I/O quantity. DI = 24 DO = 16 (Relay/Transister) wh...
by leofarhan
Thu Jan 28, 2010 8:00 am
Forum: Other HMI
Topic: [?]: Pinouts XBTZ9780 to communicate TSX Micro PLC.
Replies: 0
Views: 1783

[?]: Pinouts XBTZ9780 to communicate TSX Micro PLC.

Hello! I would like to communicate XBTGT2220 & TSX Micro PLC. There are two cables XBTZ978 & XBTZ9780. I found that now XBTZ978 has been replaced by XBTZ9780. How could I found, which XBTGT2220 require XBTZ978 & XBTZ9780. Futher I request you to send me pinout diagram of both XBTZ978 & XBTZ9780. Reg...
by leofarhan
Thu Jan 28, 2010 4:47 am
Forum: Other PLC
Topic: [?+]: Quantum Ethernet I/O Scanner using Concept
Replies: 2
Views: 2085

Re: [?]: Quantum Ethernet I/O Scanner using Concept

The problem has solved by increaseing the timeout more than that of rep. time,
We also reduce the timeout of the ethernet gateway from which we were scanning the Etherenet I/Os.
by leofarhan
Sat Jan 23, 2010 3:22 pm
Forum: Other PLC
Topic: [?+]: Quantum Ethernet I/O Scanner using Concept
Replies: 2
Views: 2085

[?+]: Quantum Ethernet I/O Scanner using Concept

Hello! I am using Ethernet I/O scanner in Quantum PLC & Concept XL V2.6 software. For the status of communication, I am using Health Bits 1x registers. When there is no communication between Quantum & remote device the health bit is low, and after succesfull communication bit goes high and never fal...
by leofarhan
Wed Jan 20, 2010 7:29 pm
Forum: Other PLC
Topic: Request: Modsoft to Unity Pro conversion software(Schneider)
Replies: 14
Views: 13263

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Dear Most, While conversion of the Applicaition (either from modsoft or ProWorX) I recieved the following errors. "Conversion of file C\Documents and Settings\Administrator\Desktop\ModSoft_Application.pwx Converter DLL for this extension not found. Please install it." Similarly error for ProWorx app...
by leofarhan
Tue Jan 19, 2010 3:11 pm
Forum: Other PLC
Topic: Request: Modsoft to Unity Pro conversion software(Schneider)
Replies: 14
Views: 13263

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Dear Friends, I also need the ModSoft to Unity Pro Conversion tool, as per previous discussion. I have gone through the Unity Pro V3.1, But didn't found the ModSoft Conversion tool. Unity Pro V3.1 has PL7 to Unity & concept to Unity conversion tool. I need your help. If you could suggest me the best...
by leofarhan
Tue Jan 12, 2010 12:40 pm
Forum: Other PLC
Topic: [Request] ModSoft to UnityPro converter Required
Replies: 1
Views: 1936

[Request] ModSoft to UnityPro converter Required

Dear Friends, I need the migrate from Modicon 984 PLC to Quantum PLC. Therefore I need application converter, which will convert ModSoft application to UnityPro, there is option in the Unity Pro Software. But this option is not available during installation, or modification of the Unity Pro Software...
by leofarhan
Mon Dec 21, 2009 3:42 pm
Forum: Other PLC
Topic: [?]: Twido communication with a UPS using SNMP
Replies: 0
Views: 1430

[?]: Twido communication with a UPS using SNMP

Hi, I would like to communicate TWIDO PLC with a UPS (Uninteruptable Power Supply), UBS communicate using Ethernet SNMP, while I have to use TWIDO Ethernet Module/Ethernet Port which works on ModBus TCP/IP. I would like to ask how could I communicate TWIDO & UPS, Is there any protocol converter whic...
by leofarhan
Tue Nov 24, 2009 8:30 pm
Forum: Other PLC
Topic: [?]: Can I read EGX via Quantum Ethernet I/O Scanner
Replies: 1
Views: 1497

[?]: Can I read EGX via Quantum Ethernet I/O Scanner

Hello, I am using concept software & Quantum PLC, I have to communicate 40 power meters PM710 which are far away from PLC, so I am using EGX100 to convert ModBus RTU to ModBus TCP/IP, further EGX is connected to NOE77101 & Quantum PLC via Ethernet Ring. The Quantum PLC has option for Ethernet I/O Sc...
by leofarhan
Tue Nov 24, 2009 6:00 pm
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 5053

Re: [?]: Sample Program of Unity Pro

Thanks for reply dear. I need an example of loop & Nested loops in Ladder. I tried myself but got few problems, sometimes the watchdog overflow, i.e. loop does not terminate. and some time operator does not work properly. My Basic requirement is to find a value from an array of registers by comparin...
by leofarhan
Tue Nov 17, 2009 7:55 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: Upload program via memory Card
Replies: 1
Views: 2111

[?]: Upload program via memory Card

Hello,

I am new user of Allen-Bradley, I have previously worked on Schneider PLC. I have a memory card for the backup application of Allen-Bradley PLC, can I read application from that memory card.

Hope I will recieve the reply soon.

Regards

LEO
by leofarhan
Fri Nov 13, 2009 11:22 am
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 5053

[?]: Sample Program of Unity Pro

I need a sample program for unity pro in which I need to use a loop in the loop using increment function. I noticed that the loop is not working.

Need help.
by leofarhan
Sun Nov 01, 2009 4:07 pm
Forum: samples
Topic: [?]: Example of Time-Stamping via Modicon Quantum PLC
Replies: 0
Views: 6627

[?]: Example of Time-Stamping via Modicon Quantum PLC

Dear Friends,

Please try to send me sample application of time stamping via Modicon Quantum PLC, using Concept & Unity Pro Software.

I shall be thankful to you.

Regards

LEO
by leofarhan
Fri Oct 30, 2009 11:17 pm
Forum: Other PLC
Topic: [Request] PL7 Application of POSEIDON 550 Dyeing Machine
Replies: 0
Views: 1300

[Request] PL7 Application of POSEIDON 550 Dyeing Machine

Dear Fellows, I need an application of POSEIDON 550 Dyeing Machine, manufactured by MAINO International, According to local supplier The MAINO International has been closed. The Machine is out of order right now and application in the PLC is protected, therefore I need your support. Machine detail i...
by leofarhan
Fri Oct 30, 2009 4:59 pm
Forum: Other PLC
Topic: [?+]: serial and activation number UAG 3.0 Unity ?
Replies: 4
Views: 4506

Re: [?+]: serial and activation number UAG 3.0 Unity ?

What is the difference between Unity Pro Software & Unity Application Generator.

If it is different, can you please upload.
by leofarhan
Wed Oct 21, 2009 7:40 pm
Forum: Other PLC
Topic: [?]: How to upload Protected Program from PL7 Telemecanique
Replies: 0
Views: 1629

[?]: How to upload Protected Program from PL7 Telemecanique

Dear Friends, I have to upload a program and trouble shoot it, the OEM who develop the program in no more available. I have two options either develop a new program or recover it fron the PLC by any means. Can any body guide me how to upload a password protected program from Modicon Micro PLC (i.e. ...
by leofarhan
Mon Oct 05, 2009 5:14 am
Forum: Other HMI
Topic: [?]: XBTN & TeSys-T Communication Problem
Replies: 0
Views: 1478

[?]: XBTN & TeSys-T Communication Problem

I am

I have to communicate 14-TeSys-T with a single XBTN.

If all the TeSys-Ts are powered up, then the ZBTN display all the data, But if more than 2-TeSys-Ts powered off, the communication with all the TeSys-T goes off.

Hope anyone will help me to come out of this problem.

Regards
by leofarhan
Mon Oct 05, 2009 4:49 am
Forum: Other HMI
Topic: [Request] IEC61850 Simulator is required
Replies: 0
Views: 1788

[Request] IEC61850 Simulator is required

I need IEC 61850 Simulator for IEC61850 communication with OPC server.

If anyone have, Please Upload.

Regards
by leofarhan
Wed Sep 16, 2009 8:45 am
Forum: Other HMI
Topic: [?]: Calibration of B&R (Provit 2000) Touch Screen
Replies: 0
Views: 2397

[?]: Calibration of B&R (Provit 2000) Touch Screen

Hello, I got a problem, I have replaced a toucscreen of B&R Provit 2000 (Part No. 5d2210.01). But after replacement I found an issue, the screen display everything normally, but the touch sensitivity expand (i.e. to click object on the top, we need to touch above that object, which is not possible)....
by leofarhan
Fri Aug 21, 2009 12:35 pm
Forum: samples
Topic: Sample Program for Time Stamping
Replies: 0
Views: 7524

Sample Program for Time Stamping

Dear Friends, I have to communicate Modicon Quantum PLC, IEDs via Gateway and SCADA. PLC and SCADA will communicate on ModBus TCP/IP and IEDs and SCADA will communicate via OPC server on IEC61850. I need to use time-stamped communication in PcVue 8.1 SCADA. Please tell me, if there is any problem in...
by leofarhan
Fri Jul 17, 2009 12:34 pm
Forum: Other PLC
Topic: [?]: TWIDO and GSM Communication
Replies: 1
Views: 2448

[?]: TWIDO and GSM Communication

Is there anyone who have communicate TWIDO PLC with WAVECOM GSM modem. I have tried to communicate using ASCII communication, but failed. It seems Twido send ASCII command to GSM Modem, but GSM Modem does not respond, Is there anyway to check TWIDO is sending correct AT-Command. Is there any tester ...
by leofarhan
Thu Jul 02, 2009 4:14 am
Forum: Other PLC
Topic: [URGENT-REQUEST] ORPHEE is required.
Replies: 0
Views: 1296

[URGENT-REQUEST] ORPHEE is required.

Dear friends,

I need the crack for the old series Programming software ORPHEE for APRIL PLC.

IF anyone have, please send me as soon as possible.

Thanks
by leofarhan
Mon Jun 22, 2009 5:18 pm
Forum: Other HMI
Topic: [?]: conversion software for Wonderware
Replies: 0
Views: 1713

[?]: conversion software for Wonderware

Dear Friends,

I have applications on different HMI Softwares and I want to convert them on wonderware.

If there is any conversion software Please upload for me.

Thanks
by leofarhan
Sat Jun 13, 2009 3:30 am
Forum: Other HMI
Topic: [Request] PowerLogic Power View
Replies: 0
Views: 1759

[Request] PowerLogic Power View

If anyone have the latest version of Power View (PowerLogic, Schneider Electric) Please upload or send me link a link.
by leofarhan
Thu Jun 11, 2009 2:19 pm
Forum: Other HMI
Topic: [Request] Switch to Vijeo Designer "S2VD"
Replies: 14
Views: 19174

S2VD is Switch To Vijeo Designer

S2VD is Schneider Utility which is used for internal / system integrator application. This utility / software convert XBTL1000 file (i.e. for XBTF Series) to Vijeo Designer file (i.e. XBTGT Series Application). The main purpose of this utility is to convert software enviorment. (i.e. XBTL1000 to vij...