PLCforum.uz.ua

Hi!
Can someone post a link to iFIX 5.0 sample/example/tutorial?
Thanks.
Best regards, everyone!

Read proper Operation and Programming manuals. Here You will find out about SERIAL LINK.
Or, You can communicate using hostlink commands (see proper manual).

Any SCADA with Omron Hostlink driver. CX-Supervisor, WinCC Flexible etc..

1. Try to use a serial port on CPU (CIF31 + home-made PLC serial cable), if its avaibile and free. CJ1M serial port speed is 115,2K max
2. Try to use latest version od CIF31 driver

But, You must have some latency (0,2 sec approx).

Try to use SIMATIC WinCC Flexible; it is esay to use, it supports both PLCs you mentioned. In WinCC, you can combine values and exchange data using scripts. It's easy, try it. Basic common programming skills needed.

'this trick run it at your own risk...' Thanks, but I chose to 'downgrade' OS to Vosta again :) Waiting for a Step7 executable under Windows7 :) Also, on Windows7 PPI adapter is missing, no way ti instal it. MicroWin can not communicate to S7-200. And (like I expected), Omron CX-ONE works fine on WI...

After upgrading from Vista 32-bit, to Windows7 32-bit, I can not start Simatic Manager. There is a message 'Your user irgths do not include use of Step7'. Is there a way to fix it, or I must reinstall it? WinCC and WinCC Flexible show no problem. http://i045.radikal.ru/0909/98/758ff6365a62t.jpg Than...

Hi!

Only NS-series terminal software suppots integrated simulation. Old and cheap/free HMI software (NT, NQ, NP) does not support it.

System language is chinese, or application langage is chinese? If You press F1 and F2 during NT11S startup, do You see a System Menu in chinese or in english?

Try to use SCADA PC-station to excange data indirecty

In Subroutine Properties there is a place where you enter password
U Subroutine Properties imas mjesto gdje unosis lozinku

Hi!
Anyone can post a link to a working CADELEC software?
Thanks

Thanks, sania. I shall try it

PIW addresses must exist in Your hardware configuration. See attachment. Work fine in my configuration.

Here you will fin a sample application.

For PC connected to OMRON PLC: You need to learn/read OMRON HostLink Communication manual. For example if you send form VB (via COM1) string: "@00RD0000..", and then rad data in VB form COM1, You will get an answer (string also) form PLC. I Tried it and it worked fine. For E5* regulators, and invert...

Thanks, but not good/transparent enough. PLCs in sample project have only one FDL connection each, but I need minimum two connections in one PLC. If you define another connection, you will have a different ID for LOCAL and for PARTNER. I want to know, if LOCAL ID is used in SUB AG_SEND, which ID (lo...

I need to implement FDL data exchange between 3 S7-CPU, each has a CP342-5 CP. I can use connections following configurations: A) Each PLC communicates to others Example: PLC_1 sends and receives data from PLC_2 PLC_1 sends and receives data from PLC_3 PLC_2 sends and receives data from PLC_1 PLC_2 ...

Problem resolved after installing SP1 +HF2!
All of you who use WinCC Flexible 2008 without SP1 please check beuaviour od trend view in runtime on panels 17*, 27* and PC!

I have a 2008 HF3 version.
In simulation and runtime, trends are ONLY visible if device type is TP177micro!
If device is, for example, OP170, OP270, Runtime... trends are NOT visible!!!
Any idea, anyone?

Link is not valid any more. Anyone post a link to NQ-Designer?

Plesa use a proper OPERATING MANUAL adn PROGRAMMING of the Omron PLC you want to use. You will fnd a detailed explanation there. Easy! (not like a Siemens, ugh!)

I recently programmed several CP1Ls using CX-Programmer V7.23.

You have .NET V3, which can not be uninstalled, and .NET V3 does not include .NET V1 which is neccessary to install CX-One. Do this: Download Microsoft .NET Framework 1.1 (dotnetfx.exe) and Microsoft .NET Framework 1.1 Service Pack 1 (dotnetfxsp1.exe). Ensure that the Microsoft .NET Framework 1.1 Re...

Link_is_Dead :(/217015278/O ... locker.zip
and
Link_is_Dead :(/217015077/O ... syCPMQ.zip


I never used it, so I do not know if those programs work or not.

Hello! :) I have an existing CQM1-CPU43 which controls a LENZE servo via pulse output, using setting Pulse output word =IR100. I need to reprogram it. I read that in CQM1-CPU43 you can set any word from IR100 to IR115 to be a pulse output word. It was previuosly set to IR100, and i can not change it...