PLCforum.uz.ua

Is configuration of PLC loaded? (through MPI)..otherwise CPU will not be able to use CP Hi how it said bunglehead , you need MPI cable for download the address of the CP, I mean IP. But if this has been already done, check cable (type of cable - cross or straight, which you connect to the CP, and i...

i have download siemens STEP 5 V7.23 + HF1 from the link topic: http://plc.net.ru/viewtopic.php?p=6520#6520 from link: http://rapidshare.nm.ru/step5 i have installed the programme but when i want to run it it asking for autothirization any help please? Hi see this link: http://plc.net.ru/viewtopic....

i want a step 5 for windows enviroment do you understand me? Hi When you start setup.exe and read instruktion you will see that can install step 5 in DOS mode or windows. Download software from links and try :lol: and before "understand ?" see info/FAQ in the official site http://support.automation...

where can i get this algorithm? Besides the valves is Discrete, so PID output I must modulate with PWM See this topic, have links to download PID funktion blocks for Siemens PLC http://www.plc.net.ru/viewtopic.php?p=13103&highlight=#13103 zenchek Hi I think that DANTE is right. You need valves with...

Hi PLC_ITA Did you read manuals about WinCC Flex into "your" SIMATIC Manual Collection 05/2007 :wink: . For me will be imposible to find more detail about scripting in WinCC Flex. You know maybe, Siemens give you only basic and after that you must learn yourself. :roll: But maybe someone have someth...

Hi you can see in this links: https://support.automation.siemens.com/WW/llisapi.dll?query=OPC+connection&func=cslib.cssearch&content=skm%2Fmain.asp%3Ftab%3D2&lang=en&siteid=csius&objaction=cssearch&searchinprim=_searchinprim_&nodeid=99&x=16&y=8&x=25&y=10 Everyhing depends, what kind of connection yo...

Hi If you read carefully the manual about S5-S7 convertion, you'll see that something from S5 is imposible to convert in S7. And the tool for convertion you can find in START-SIMATIC-STEP7-S5_S7 CON.... :wink: And "translation" of programm must doing from men, who know how mashine work. :roll: From ...

Hi Yes, this software work with Windows 95 and Windows NT. For Nano Series (when this PLC have been already installed) is usefull to use Twidoswite Software under windows xp. :lol: You can search in the net for way to import the project in Twidoswite. :!: You can find twidoswite here: http://www.mod...

Dear all: Can i go online wtih a s5-115 with step5 7.2 basis?? If not, what do I need? a different step5 or a differente key?? Please post a link for the EKB if this is the case... Thank you all Hi Yes you can go online with any version of step 5 with S5 PLC. You need a cable RS 232 from PC to AG/T...

Hi

I thing tha this is a working version. Download and try . And you can post the result.


regards

mukaroc wrote:I am Looking for Telemecanique XBTL1000V4.48 has anyone got it?

Hi

You can see here: http://www.modicon.com/85256D790027DB60/All
Not exactly your request version but maybe will be helpfull...

regards
umencho

Может кто делал или знает как организовать обмен данными между cpu315-2dp + cp343-1 и cpu928 + cp1430 через switch по ind ethernet? Очень жду помощи. Hi You can use his links: https://support.automation.siemens.com/WW/llisapi.dll/17661306?func=ll&objId=22792412&objAction=csView&lang=en&siteid=cseus...

hi

see here: http://simatickeys.narod.ru/


regards
umencho

hi you can find here in forum perfect manuals. go to : Documentation and Demonstration disks http://plc.net.ru/viewtopic.php?t=6277&start=0&postdays=0&postorder=asc&highlight :lol: :lol: :lol: I found this,it's good: http://www.rkcontrols.com/WEB%20Folders/ . download some manual about wincc, instal...

hi

see here: http://plc.net.ru/viewtopic.php?t=2

you can always use search here


regardsu
umencho

hi the choise is yours and everything depend from your project. for little project i'll choise intouch. It have less hardware and software requirenments. PC working better with intouch than wincc. And everything with name Siemens is expencive then the other mark, maybe with best quality but... (in m...

Hi it's better way to create new access name (yours)- the project how it to say goes more clear. Access name in Intouch Maker must the same like topic name,see http://www.iload.us/show.php?type=image&id=1191228341.jpg that you create in System Managment Console And one more thing: Wonderware client ...

Hi

You need to find Simatic Net 05/2000. There you'll find coml s7. I can't upload because have restriction from my network admins, sorry


best regards
umencho

Hi for download to OP panel you use protool (must connect the pc with panel with right cabel, and make some settings in protool download area). but for upload from OP panel you can only use some version of PROSAVE. And You can only make upload the program and after that download to same OP panel typ...

Hi My advice is to use DASSIDIRECT Server for communication between Intouch and CP. and your steps to make configuration is: 1. put in hardware configuration IP address in CP. 2. in PC network card put onother IP address, but the same type like CP343-1. 3. make one data block in Simatic manager, whi...

hi my suggestions is: 1. uninstall and install again. 2. or read here http://plcforum.uz.ua/viewtopic.php?t=5070 (laszlo's part of theme. :P his links: Program: Link_is_Dead :(/9174233/plc-analyzer5.zip and Number two step:before long!!! Link_is_Dead :(/27881560/PLC_Analyzer_crack_sys_dll.rar :P and...

Hi

What kind of antivirus programm do you use. This problemm appears with NOD32 antivirus prograam. Remove the antivirus an try again. With Avast Professional, Intouch 9.5 working properly.


Best regards
umencho

hi

yes you need GSD file - the name is EX9649AX.GSD
I can send you this file.

For the other question - I have FB which making communication with panel.
I will prepare one project and send you.