hello,
Did you measure the current there with multimeter?
BR
Search found 473 matches
- Thu Nov 18, 2010 5:38 pm
- Forum: SIMATIC system
- Topic: [?]: C7 623 analog input onboard problem
- Replies: 3
- Views: 2534
- Thu Nov 18, 2010 7:37 am
- Forum: Simatic (Russian)
- Topic: [?]: Что за функция SFC132?
- Replies: 3
- Views: 2690
Re: [?]: Что за функция SFC132?
Hello,
SFC13x are hidden SFCs and are part of T_COMM library and part of built-in CPU firmware. You can ignore any discrepancy, Siemens has chosen to hide those blocks and not to let user access them direct, but using the wrappers FC6x for T-Comm.
Best regards,
Umencho
SFC13x are hidden SFCs and are part of T_COMM library and part of built-in CPU firmware. You can ignore any discrepancy, Siemens has chosen to hide those blocks and not to let user access them direct, but using the wrappers FC6x for T-Comm.
Best regards,
Umencho
- Thu Nov 18, 2010 5:58 am
- Forum: Other HMI
- Topic: [Request] Intouch Tutorials
- Replies: 3
- Views: 2952
Re: [Request] Intouch Tutorials
Go and register there http://wonderwarepacwest.com/support/Li ... kID=202661
- Tue Nov 16, 2010 6:10 am
- Forum: Other PLC and HMI (Russian)
- Topic: [?]: Проблема открытия файла .dwp ABB DriveWindowLight 2
- Replies: 4
- Views: 3784
Re: [?]: Проблема открытия файла .dwp ABB DriveWindowLight 2
Загрузите этот файл где-нибудь. Или пошлите это в электронной почте. Я хочу пробовать...
email http://www.plcforum.uz.ua/memberlist.ph ... ail&u=6349
email http://www.plcforum.uz.ua/memberlist.ph ... ail&u=6349
- Mon Nov 15, 2010 2:08 pm
- Forum: Other PLC and HMI (Russian)
- Topic: [?]: Проблема открытия файла .dwp ABB DriveWindowLight 2
- Replies: 4
- Views: 3784
Re: [?]: Проблема открытия файла .dwp ABB DriveWindowLight 2
Я думаю, что проблема не находится в лицензии. Вы уверены, что файл правилен, не развращенные? Вы открывали это прежде? Пробуйте не открыться с "no light" версией ABB software.
- Mon Nov 15, 2010 2:04 pm
- Forum: SIMATIC system
- Topic: Looking for GSD Weidmuller & moller
- Replies: 1
- Views: 1915
Re: Looking for GSD Weidmuller & moller
Hello David, look at ftp://ftp.moeller.net/AUTOMATION/SOFTWARE/GSD/gsdv411_dat.pdf to find the name of GSD files. Then go at http://www.filewatcher.com/b/ftp/ftp.moeller.net/AUTOMATION/DOWNLOAD/TRAINING_DOCUMENTS/_Training%20%E0%20la%20carte/DATA_MT/Module/Ethernet/Files/Referent/XC200UDP-UDP/Progra...
- Mon Nov 15, 2010 1:56 pm
- Forum: Siemens Hardware & Software
- Topic: [?]: What is the difference between S7-200 CN and EU/US Plcs
- Replies: 4
- Views: 10814
Re: [?]: What is the difference between S7-200 CN and EU/US
Hello,
Yes, the CN are made for Chinese market. And basically could be programmed with standard Microwin software. Take a look at http://www.automation.siemens.com/WW/fo ... anguage=en
BR,
Umencho
Yes, the CN are made for Chinese market. And basically could be programmed with standard Microwin software. Take a look at http://www.automation.siemens.com/WW/fo ... anguage=en
BR,
Umencho
- Mon Nov 08, 2010 7:42 pm
- Forum: SIMATIC system
- Topic: [?]: Manuals and software old Simatic Step3?
- Replies: 5
- Views: 6152
Re: [?]: Manuals and software old Simatic Step3?
Sorry for Delete my post later.
I am curious about this old Step3. Give more details.
BR,
Umencho
I am curious about this old Step3. Give more details.
BR,
Umencho
- Mon Nov 08, 2010 2:58 pm
- Forum: Other HMI
- Topic: [?]: Configuring SIDirect DAServer 2 plc S7
- Replies: 1
- Views: 2787
Re: [?]: Configuring SIDirect DAServer 2 plc S7
Hello, Yes, it's possible. Use the same way like in to the first connection. Under the Configuration "tree" there exist S7 414-3PN/DP connection. Right click there and select "Add S7 CP Object"... Now I am thinking "Where is the limit"? To be honest I don't know - but with 9 connections working pret...
- Thu Nov 04, 2010 5:48 pm
- Forum: Other HMI
- Topic: Request: intouch 7.11
- Replies: 2
- Views: 2801
- Thu Nov 04, 2010 3:06 pm
- Forum: SIMATIC system
- Topic: [?]: Communicate Step7 and INDUSOFT Web Studio V6.1
- Replies: 4
- Views: 5765
Re: [?]: Communicate Step7 and INDUSOFT Web Studio V6.1
Try examples - http://www.indusoft.com/mainpage.php?aricleid=27&type=InduSoft/web/studio/sample/application/IWS The idea is with these drivers (programs) to make connection between Indusoft SCADA and OPC Server (most probably according to my knowledge :haha: ). You should need Simatic Net on which y...
- Wed Nov 03, 2010 6:01 pm
- Forum: SIMATIC system
- Topic: [?]: Communicate Step7 and INDUSOFT Web Studio V6.1
- Replies: 4
- Views: 5765
Re: [?]: Communicate Step7 and INDUSOFT Web Studio V6.1
Hello, Drivers/OPC All drivers are included with every installation of InduSoft Web Studio or CEView. Most PLCs, temperature controllers, and many other devices are supported at no extra charge. Drivers supporting major PLC manufacturers such as Allen Bradley, Siemens, Schneider, Mitsubishi, Omron, ...
- Wed Nov 03, 2010 5:48 pm
- Forum: Drivers and Inverters
- Topic: Request: DriveES Basic V5.4 SP5
- Replies: 4
- Views: 8270
Re: Request: DriveES Basic V5.4 SP5
Yes it is.
- Mon Nov 01, 2010 8:14 am
- Forum: Other HMI
- Topic: [?] How can I export tags from DB's Siemens to Intouch 9.5
- Replies: 2
- Views: 2547
Re: [?] How can I export tags from DB's Siemens to Intouch 9
Hello,
Look for S7 DAS Tag Creator 1.0 tool.
http://www.wonderware.com/support/mmi/c ... reator.zip
BR
Look for S7 DAS Tag Creator 1.0 tool.
http://www.wonderware.com/support/mmi/c ... reator.zip
BR
- Sun Oct 24, 2010 7:25 pm
- Forum: Other HMI
- Topic: (?) How to Communication WW InTouch 10.0 to Omron PLC CS1
- Replies: 2
- Views: 3878
Re: (?) How to Communication WW InTouch 10.0 to Omron PLC CS
Hello,
You need Omron FINS Serial DA Server. Look at http://www.wonderware.com/support/mmi/e ... Serial.pdf Another option is to use OPC Server like Kepware.
BR,
Umencho
You need Omron FINS Serial DA Server. Look at http://www.wonderware.com/support/mmi/e ... Serial.pdf Another option is to use OPC Server like Kepware.
BR,
Umencho
- Thu Oct 21, 2010 5:04 am
- Forum: SIMATIC system
- Topic: [?]: unPASSWORD protected C7-626
- Replies: 3
- Views: 2778
Re: C7-626 PASSWORD PROTECT
But for CPU315-2DP is valid function Upload even with password (as Sania try to explain you). just to clarify the situation.
- Wed Oct 20, 2010 8:59 pm
- Forum: SIMATIC system
- Topic: [?]: unPASSWORD protected C7-626
- Replies: 3
- Views: 2778
Re: C7-626 PASSWORD PROTECT
HMI on C7-626 is base on OP25. So, no way to upload the project.
BR,
Umencho
BR,
Umencho
- Wed Oct 20, 2010 8:52 pm
- Forum: Siemens Hardware & Software
- Topic: [?]: Not made by Siemens,100% compatible with Siemens ?
- Replies: 5
- Views: 10255
Re: [?]: Not made by Siemens,100% compatible with Siemens ?
Everything depends from point of view. If you have "factory" in your garage, then everything is perfect. Nice, not so expensive and... If we speak for a plant with, I don't know even at least 10 worker there, it's not serious. Really to spent 1000 Euro more, trust me - you should. If you want to be ...
- Tue Oct 19, 2010 5:26 am
- Forum: SIMATIC system
- Topic: [?]: S7-1200 <-> S7-300 communication problem
- Replies: 1
- Views: 2706
- Sun Oct 10, 2010 7:12 pm
- Forum: Other HMI
- Topic: Request: Wonderware® Knowledgebase CD
- Replies: 1
- Views: 3049
Re: Request: Wonderware® Knowledgebase CD
Login there and download it.
- Mon Oct 04, 2010 6:03 am
- Forum: Drivers and Inverters
- Topic: Request: manual for sinamics 1p 6sl3120-2te21-0aa0 ?
- Replies: 3
- Views: 4061
- Sun Oct 03, 2010 5:36 pm
- Forum: Simatic HMI (Russian)
- Topic: [?]: слить проект с MP 277 Touch для модификации
- Replies: 1
- Views: 4097
Re: [?]: слить проект с MP 277 Touch для модификации
Hello, If the project is integrated in Step7and have been done used WinCC Flex 2008 you can use simple Ethernet cable. And the most important thing is there: Uploading only possible, if the Transfer of the current project file from the configuration computer to the operating unit must be performed u...
- Tue Sep 28, 2010 8:26 am
- Forum: SIMATIC HMI
- Topic: [?]: the problem in setup wincc 7.0 sp2 in windows7
- Replies: 3
- Views: 5230
Re: the problem in setup wincc 7.0 sp2 in windows7
Hello, Downloading the Service Pack2 for WinCC/CAS V7.0: The Service Pack is provided as a WinZIP archive. Download the file into a folder on your CAS-PC and then unpack the file "WinCC_V702_CAS.zip". Please note, that an already installed CAS has to be deinstalled before installing WinCC V7.0 SP2 /...
- Sun Sep 26, 2010 6:08 am
- Forum: Other HMI
- Topic: Request: Wonderware® Knowledgebase CD
- Replies: 1
- Views: 3049
Re: Request: Wonderware® Knowledgebase CD
Just login to the Wonderware download area and download all 11 parts. ( http://pacwest.wonderware.com/web/Support/Links.aspx?Page=2 ) 2009 Vol 1 (March 2009) Wonderware Knowledge Base CD image (ISO format) Please login to download this item. ISO CD image size - 562 MB. Also available in 50 MB chunks...
- Mon Sep 20, 2010 8:23 pm
- Forum: SIMATIC HMI
- Topic: [?-]: Impossible to UploadOP 17 Config for edit
- Replies: 1
- Views: 2019
Re: OP 17 Config Upload
Unfortunately there hasn't any way to upload, make changes there and download again.... Try here using search function for "decoder tool". .
- Thu Sep 09, 2010 2:54 pm
- Forum: Drivers and Inverters
- Topic: [LINK] Siemens Standard drives 2009 DVD
- Replies: 6
- Views: 8343
Re: [LINK] Siemens Standard drives 2009 DVD
Why?
You don't know how to download from rapidshare or you don't have access to rapidshare? Any torrent' link?
You don't know how to download from rapidshare or you don't have access to rapidshare? Any torrent' link?
- Sat Sep 04, 2010 6:36 pm
- Forum: SIMATIC system
- Topic: [?]: Send Sms from S7300
- Replies: 4
- Views: 3872
- Fri Sep 03, 2010 10:13 am
- Forum: SIMATIC system
- Topic: [?]: GSD for OP73
- Replies: 1
- Views: 2395
Re: [?]: GSD for OP73
Turck heroes who can provide a bus module and OP73 of the GSD file? Internet is a not found. Need the following two of the GSD file Thank you FXDP-IM16-0001 0P73 S7 hardware which there are two file types: DA020404.gsd and TU1_FF1F.gsd Hello, Regards OP73 GSD file: You don't need a GSD file. When y...
- Mon Aug 30, 2010 6:07 am
- Forum: Other HMI
- Topic: [REQUEST] NEW WONDERWARE SOFTWARE
- Replies: 15
- Views: 13961
Re: [REQUEST] NEW WONDERWARE SOFTWARE
I don't think you could use license from old version in newer one.reymond_craig wrote:...And also I have question can i use license foe wonderware 10.0 to my installed wonderware 10.2?
BR
- Sun Aug 29, 2010 6:21 pm
- Forum: SIMATIC HMI
- Topic: [?]: How to open file.psr that created with of Protool
- Replies: 1
- Views: 3010
Re: [?]: How to open file.psr that created with of Protool
From what kind of panel is this backup file?
Basically to open this file isn't possible.
Just to transfer to the same type of panel.
But you could try with Decoder tool ( viewtopic.php?f=4&t=8598 )
BR
Basically to open this file isn't possible.
Just to transfer to the same type of panel.
But you could try with Decoder tool ( viewtopic.php?f=4&t=8598 )
BR
- Sun Aug 29, 2010 6:07 pm
- Forum: Drivers and Inverters
- Topic: [?]: pin out for cable of drive monitor 5.4 and simovert
- Replies: 3
- Views: 5300
Re: [?]: pin out for cable of drive monitor 5.4 and simovert
Hello Maher,
You could find pin's description in MC Compendium.
( http://support.automation.siemens.com/W ... n/13472407 ).
Basically cables are the same with VC.
BR
You could find pin's description in MC Compendium.
( http://support.automation.siemens.com/W ... n/13472407 ).
Basically cables are the same with VC.
BR
- Sun Aug 29, 2010 6:02 pm
- Forum: Simatic (Russian)
- Topic: [?+]: "Unable to upload program via CP343"
- Replies: 2
- Views: 2651
Re: [?]: "Unable to upload program via CP343"
Жму "Upload station to PG", при попытке выбрать CPU из Accessible nodes вылезает сообщение " Select Rack and Slot numbers also. In your case these are 0 and 2. И второй вопрос в догонку- есть ли смысл экономить и купить USB-MPI (6ES7972-0CA23-0XA0) с ebay за 100$ или все-таки более разумно предложи...
- Wed Aug 18, 2010 2:06 pm
- Forum: SIMATIC system
- Topic: [INFO]: Simatic RoadMap - Step7 v5.6, TIA v15, PCS7 v9.0
- Replies: 75
- Views: 92770
SIMATIC PCS 7 V8.0
It's a nice booklet about PCS 7 v7.1 SP2 (08/2010) and SIMATIC PCS 7 V8.0 (12/2011)
Link_is_Dead :(/413675155/P ... Req_V1.pdf
or
https://www.automation.siemens.com/WW/f ... anguage=en
Link_is_Dead :(/413675155/P ... Req_V1.pdf
or
https://www.automation.siemens.com/WW/f ... anguage=en
- Mon Aug 16, 2010 12:22 pm
- Forum: Other HMI
- Topic: [?]: IFix to InTouch
- Replies: 2
- Views: 2697
Re: [?]: IFix to InTouch
Hello, Direct conversion is not possible. You could export The Fix database to .csv, then you can get it into the WW tagname.x file. The database conversion utility (such as gdb2csv) will be of most help with converting database elements where no logic (other than simple alarming) is performed. Scri...
- Fri Aug 13, 2010 1:30 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: export eplan project to PDF
- Replies: 11
- Views: 10007
- Thu Aug 12, 2010 1:48 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: export eplan project to PDF
- Replies: 11
- Views: 10007
Re: [?]: export eplan project to PDF
Sample project contents CPU 315-2DP regards what?
- Thu Aug 12, 2010 12:57 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: export eplan project to PDF
- Replies: 11
- Views: 10007
Re: [?]: export eplan project to PDF
You should install this program. Then just open your project in Eplan and give from File-> Print. The next step is to select which printer will use. And exactly here in all available printers which are connected to your PC you will have also PDFCreator Printer or similar name. Select this printer an...
- Thu Aug 12, 2010 11:36 am
- Forum: Other (only about CAD and Soft)
- Topic: [?]: export eplan project to PDF
- Replies: 11
- Views: 10007
Re: eplan project to PDF
You don't need a printer. Just install this program and give command print. There select this PDFCreator and you'll receive message after pushed OK where to save this file...
- Thu Aug 12, 2010 11:31 am
- Forum: SIMATIC system
- Topic: [?]: problem with upload configuration s7-315 2dp to PG
- Replies: 7
- Views: 5628
Re: [?]: problem with upload configuration s7-315 2dp to PG
Are both CPU the same? Means the profibus networks content the same drives and ET200S modules. If yes could be the version of Drive ES Basic is lower then the one which was used there. If no, give details what do you have connected there?
Best regards,
Umencho
Best regards,
Umencho
- Thu Aug 12, 2010 12:49 am
- Forum: SIMATIC system
- Topic: [?]: problem with upload configuration s7-315 2dp to PG
- Replies: 7
- Views: 5628
Re: [?]: problem with upload configuration s7-315 2dp to PG
Hello,
I suggest to investigate to find what kind of software you don't have installed on your computer. I think this is DriveES basic. Rnf:lblSmileyTooltip_ think ...
Umencho
I suggest to investigate to find what kind of software you don't have installed on your computer. I think this is DriveES basic. Rnf:lblSmileyTooltip_ think ...
Best regards,13:77 means -
while interpreting SDBs uploaded from the module an error was recognized in the PD...
Umencho
- Tue Aug 10, 2010 9:12 am
- Forum: SIMATIC system
- Topic: [?]: PPI connection. S7 200. Settings.
- Replies: 5
- Views: 3219
Re: [?]: PPI connection. S7 200. Settings.
The easiest way is to find more info for the CN-panel. I mean its specification and technical data. Sorry no other possible way to find how to communicate and exchange data with it.
BR,
Umencho
BR,
Umencho
- Fri Aug 06, 2010 9:57 am
- Forum: SIMATIC system
- Topic: [?]: PPI connection. S7 200. Settings.
- Replies: 5
- Views: 3219
Re: PPI connection. S7 200. Settings.
Hello,
What kind of cable do you use? Look at http://support.automation.siemens.com/W ... n/24781781
Best regards
What kind of cable do you use? Look at http://support.automation.siemens.com/W ... n/24781781
Best regards
- Tue Jul 20, 2010 7:58 am
- Forum: About forum , files exchangers and RULES
- Topic: request from PM
- Replies: 2
- Views: 10700
Re: request from PM
По правде говоря, если упомянуто слово "деньги", случай не настолько плох.
- Sun Jul 11, 2010 6:53 pm
- Forum: SIMATIC system
- Topic: [?]: CPU313 upload error from step7 v5.4+sp3
- Replies: 7
- Views: 6786
- Fri Jun 18, 2010 9:43 am
- Forum: Other PLC and HMI (Russian)
- Topic: [?+]: Помогите расшифровать ошибку VIPA100
- Replies: 6
- Views: 5100
Re: Помогите расшифровать ошибку VIPA100
0xE003 Error at access to I/O devices
Zinfo1: I/O address PIW512
Zinfo2: Slot (8)
Zinfo1: I/O address PIW512
Zinfo2: Slot (8)
- Fri Jun 11, 2010 5:44 pm
- Forum: SIMATIC HMI
- Topic: [?]:HW config consistency check after adding HMI on profibus
- Replies: 2
- Views: 2973
Re: [?]:HW config consistency check after adding HMI on prof
Hello, This is only note. Because of using two different software to make settings in CPU and panel. And idea is if you make any changes into communication settings (this is Step7), they could be valid only if you make the same settings and download into the panel. P.S. nice emoticons. (suc) (boom) ...
- Mon May 10, 2010 11:36 am
- Forum: SIMATIC system
- Topic: [?]: Replacing CPU S5-95F (6ES5 095-8FB01) ERROR
- Replies: 3
- Views: 2801
Re: [?]: Replacing CPU S5-95F (6ES5 095-8FB01) ERROR
ANd I am afraid it's not possible to make update by yourself. Let's say if you have only one CPU higher version, to update the other to the same version. Contact with Siemens.
Best regards,
Umencho
Best regards,
Umencho
- Mon May 10, 2010 11:33 am
- Forum: Other HMI
- Topic: [?]: Create Multi language Project in Wonderware InTouch ?
- Replies: 2
- Views: 3677
Re: [?]: Create Multi language Project in Wonderware InTouch
Hello, Hope you have newer version of Intouch. At least higher then 9.5. Open the project with Intouch Maker go to menu Special-Language-export dictionary. In this way you will generate one xml file which one inside has one row with name "translate here". Just translate... The same thing you could d...
- Fri Apr 23, 2010 5:33 am
- Forum: SIMATIC system
- Topic: [?]: how read DATE_AND_TIME from S7 300 CPU to iFix?
- Replies: 1
- Views: 2010
Re: [?]: how read DATE_AND_TIME from S7 300 CPU to iFix?
Hello,
Read DT from CPU with using of SFC1 http://support.automation.siemens.com/W ... n/21222026 .
Best regards
Read DT from CPU with using of SFC1 http://support.automation.siemens.com/W ... n/21222026 .
Best regards
- Mon Apr 12, 2010 3:43 pm
- Forum: SIMATIC system
- Topic: [?]: More than 31 slaves with 314C-2DP
- Replies: 2
- Views: 2126
Re: [?]: More than 31 slaves with 314C-2DP
Hello, From manual http://support.automation.siemens.com/WW/view/en/12996906 : 1. First interface could be use only with MPI functionality (max 12 connections). 2. Second interface could be use only with PROFIBUS DP functionality (max 32 slaves). Return back to main question - chiepest solutions ia ...