Hi,
Of course You can use PID Control Tool software V5.2 + SP2. There is no any restrictions.
regards
Search found 182 matches
- Tue Jan 03, 2012 6:32 pm
- Forum: SIMATIC system
- Topic: [?]: Simatic STEP7 PID Controller example ?
- Replies: 5
- Views: 10373
- Mon Jan 02, 2012 5:31 pm
- Forum: SIMATIC system
- Topic: [?]: Simatic STEP7 PID Controller example ?
- Replies: 5
- Views: 10373
Re: [?]: Simatic STEP7 PID Controller example ?
Hi,
Take a look following link
Where can I find an example of level control that can be parameterized via SIMATIC Standard PID Control?
http://support.automation.siemens.com/W ... en/8846287
regards
Take a look following link
Where can I find an example of level control that can be parameterized via SIMATIC Standard PID Control?
http://support.automation.siemens.com/W ... en/8846287
regards
- Sat Dec 31, 2011 2:55 pm
- Forum: SIMATIC system
- Topic: [?] S7-315PN/DP comunication to S7-400/CP443-1 via ethernet
- Replies: 5
- Views: 2774
Re: [?] S7-315PN/DP comunication to S7-400/CP443-1 via ether
Hi, Take a look this manual https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csSearch&objaction=cssearch&lang=en&siteid=cseus&query=&query2=20982954_SIMATIC_Comm_DOKU_v201_e&content=adsearch%2Fadsearch.aspx (sfaq) http://support.automation.siemens.com/WW/view/en/20982954 Use of prope...
- Fri Dec 30, 2011 11:58 am
- Forum: SIMATIC system
- Topic: [?] S7-315PN/DP comunication to S7-400/CP443-1 via ethernet
- Replies: 5
- Views: 2774
Re: [?] S7-315PN/DP comunication to S7-400/CP443-1 via ether
Hi,
If You want to use DSEND and BRCV You should configure S7 connection in NetPro.
regards
If You want to use DSEND and BRCV You should configure S7 connection in NetPro.
regards
- Tue Nov 29, 2011 11:21 pm
- Forum: Other HMI
- Topic: [Request] ASE2000 RTU Test Set
- Replies: 6
- Views: 8532
Re: [Request] ASE2000 RTU Test Set
Hi,
I install ASE2000 test set. How is it possible to unlock some protocol, because under licensed protocol stay nothing.
regards
I install ASE2000 test set. How is it possible to unlock some protocol, because under licensed protocol stay nothing.
regards
- Tue Nov 08, 2011 4:51 pm
- Forum: SIMATIC system
- Topic: [?]: Set Date and Time in S7-312C using SFC0
- Replies: 3
- Views: 2535
- Wed Oct 05, 2011 8:47 pm
- Forum: Simatic (Russian)
- Topic: [?]: Как задать время скана 10 мсек Simatic real time plc ?
- Replies: 1
- Views: 1803
Re: [?]: Как задать время скана 10 мсек Simatic real time pl
Hi, You should use cyclic interrupts. Firs You should go to Hardware Configuration. Click on PLC (right mouse click -> Object properties...). Go on Cyclic Interrupts tab. Under execution specify time interval for cyclic interrupt for example OB35 depend on PLC used (10ms in Your case). Compile and s...
- Wed Jul 27, 2011 2:39 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: Eplan Plot Frame Question
- Replies: 4
- Views: 7806
Re: [?]: Eplan Plot Frame Question
Hi, Open Your project. Then go to Option -> Settings... In the left side of Settings window select User -> Management -> Directories. In the right side You have item named Plot Frames:. Here You choose directory where You store and call Plot Frames in Your projects. You can use Eplan default directo...
- Tue Jul 26, 2011 9:23 pm
- Forum: Other PLC
- Topic: [?]: Monitoring software in PC for any PLC
- Replies: 3
- Views: 2118
Re: [?]: Monitoring software in PC for any PLC
Almost every modern SCADA system have drivers for various controllers. For example WinCC, iFix, Citect, InTouch and many other.
ragards
ragards
- Mon Jul 18, 2011 12:23 pm
- Forum: SIMATIC system
- Topic: [?]: s7-300 PID temperature control for heat/cool operation
- Replies: 6
- Views: 5100
Re: [?]: s7-300 PID temperature control for heat/cool operat
You can use one PID regulator with mapping of output manipulated value for heating and for cooling. If error is positive than You use mapping for cooling and vice versa.
regards
regards
- Thu Jul 14, 2011 5:30 pm
- Forum: SIMATIC system
- Topic: [?]: s7-300 PID temperature control for heat/cool operation
- Replies: 6
- Views: 5100
Re: [?]: s7-300 PID temperature control for heat/cool operat
Hi,
I don't know what SSR stand for, but for turning on/off of blower You can use Pulse generator output (take a look pages 25-27). Parameters of PID function block You can find on appendix A.3.
regards
I don't know what SSR stand for, but for turning on/off of blower You can use Pulse generator output (take a look pages 25-27). Parameters of PID function block You can find on appendix A.3.
regards
- Wed Jul 13, 2011 11:51 pm
- Forum: SIMATIC system
- Topic: [?]: s7-300 PID temperature control for heat/cool operation
- Replies: 6
- Views: 5100
Re: [?]: s7-300 PID temperature control for heat/cool operat
Hi,
Try function blocks FB58 (Continuous Temperature Controller "TCONT_CP") and FB59 (Temperature Step Controller FB59 "TCONT_S")
Search word(s): pid temperature control
regards
Try function blocks FB58 (Continuous Temperature Controller "TCONT_CP") and FB59 (Temperature Step Controller FB59 "TCONT_S")
Search word(s): pid temperature control
regards
- Mon Jul 11, 2011 11:15 pm
- Forum: SIMATIC system
- Topic: [?]: indirect addressing and cross reference
- Replies: 3
- Views: 2728
Re: [?]: indirect addressing and cross reference
Hi,
It is right, but I think that it is not possible to see cross references for indirect addressing, because such software should be able to analyse Your code. In address register You can load any value.
regards
It is right, but I think that it is not possible to see cross references for indirect addressing, because such software should be able to analyse Your code. In address register You can load any value.
regards
- Mon Jul 11, 2011 9:46 am
- Forum: SIMATIC system
- Topic: [?]: indirect addressing and cross reference
- Replies: 3
- Views: 2728
Re: [?]: indirect addressing and cross reference
Hi,
In Step7 Cross Reference View (Options -> Reference Data -> Display) select View -> Cross References. Go to View -> Filter... Here You select what kind of cross reference You want to see. In Your case select Per. Inputs and Per. Outputs and press OK.
regards
In Step7 Cross Reference View (Options -> Reference Data -> Display) select View -> Cross References. Go to View -> Filter... Here You select what kind of cross reference You want to see. In Your case select Per. Inputs and Per. Outputs and press OK.
regards
- Thu Jul 07, 2011 8:55 pm
- Forum: Siemens Hardware & Software
- Topic: [INFO]: S7-200,300,400 to Ethernet,CP5512 Express card
- Replies: 6
- Views: 14460
Re: [INFO]: S7-200,300,400 to Ethernet,CP5512 Express card
Hi , Take a look on Duel system adapter ( http://www.duel-systemsadapters.com/downloads/DuelAdapter_Quick_Troubleshooting_Guide_Windows_XP_Version_1.0.pdf ). This is Expres Card to PCMCIA adapter. Also You have PC Adataprer form Siemens. Price is 300EUR. http://support.automation.siemens.com/WW/view...
- Tue Jul 05, 2011 9:19 am
- Forum: SIMATIC system
- Topic: [?]: What is equalant to IM 151-7 & 8 in the S7 300 series
- Replies: 1
- Views: 2325
Re: [?]: What is equalant to IM 151-7 & 8 in the S7 300 ser
Hi, In CA01 Siemens catalog for IM151-7 stay Interface module for SIMATIC ET 200S with integrated S7-CPU 314 For high-performance control solutions in ET 200S Increases the availability of plants and machinery Programming via PROFIBUS DP Compact SIMATIC Micro Memory Card (MMC) Integrated 12 Mbit/s P...
- Fri Jun 17, 2011 11:24 pm
- Forum: SIMATIC system
- Topic: [?]: simulation between s7plcsim + step7+wincc flex 2005
- Replies: 13
- Views: 16649
Re: simulation between s7plcsim + s7+wincc flex 2005
Hi, First You have to adjust PG/PC interface (Start -> All Programs -> Simatic -> Step7 -> Setting PG/PC Interface or ftom Step7 under Options -> Set PG/PC Interface). There You should adjust appropriate interface. In Your case some of PLCSIM interfaces depending on type of communication between Win...
- Wed Jun 08, 2011 10:34 pm
- Forum: SIMATIC HMI
- Topic: [?] Communication between TP177B and WinccFlexible
- Replies: 1
- Views: 2308
Re: [?] Communication between TP177B and WinccFlexible
Hi, Did You make appropriate adjustment in WinCC Flex (Communication -> Connections). There You can set communication parameters for Your panel (Interface, Panel and PLC address). Did You make Your connection to On on Active field. Also You can make hardware configuration in Step7 and integrate pane...
- Mon May 30, 2011 4:42 pm
- Forum: samples
- Topic: [?]: Count Number of motor starts in the last hour
- Replies: 5
- Views: 16236
Re: [?]: Count Number of motor starts in the last hour
Hi, I think that You should think about statement list (or instruction list) instead of ladder logic because statement list is superset to ladder. That means that everything what You write in ladder You can convert to statement list. Opposite, it is not rule (You can not convert everything what is d...
- Sun May 29, 2011 6:15 pm
- Forum: samples
- Topic: [?]: Count Number of motor starts in the last hour
- Replies: 5
- Views: 16236
Re: [?]: Count Number of motor starts in the last hour
Hi,
Did You look in www.oscat.de -> downloads (BASIC DOC 332 EN). There You have function CLICK_CNT. This is not exactly what You looking for but it is similar. You should also look rest of functions.
regards
Did You look in www.oscat.de -> downloads (BASIC DOC 332 EN). There You have function CLICK_CNT. This is not exactly what You looking for but it is similar. You should also look rest of functions.
regards
- Fri May 27, 2011 9:27 am
- Forum: SIMATIC system
- Topic: [?]: monitoring analog output via VAT
- Replies: 7
- Views: 5843
Re: [?]: monitoring analog output via VAT
Hi,
That means that monitoring is not possible. It does not mean that this address does not exist.
regards
That means that monitoring is not possible. It does not mean that this address does not exist.
regards
- Thu May 26, 2011 6:44 pm
- Forum: SIMATIC system
- Topic: [?]: monitoring analog output via VAT
- Replies: 7
- Views: 5843
Re: [?]: monitoring analog output via VAT
Hi,
Actually You are right. My basic idea is to mirror same value which are going to analog output to flag word and afterward to monitor this flag value.
..
regards
Actually You are right. My basic idea is to mirror same value which are going to analog output to flag word and afterward to monitor this flag value.
..
Code: Select all
T PQW256
T MW0
- Thu May 26, 2011 1:01 pm
- Forum: SIMATIC system
- Topic: [?]: monitoring analog output via VAT
- Replies: 7
- Views: 5843
Re: [?]: monitoring analog output via VAT
Hi,
If You try to monitor analog output directly it is not possible. You should mirror PQW to some flag or data bleck word and monitor this mirrored value.regards
If You try to monitor analog output directly it is not possible. You should mirror PQW to some flag or data bleck word and monitor this mirrored value.
Code: Select all
L PQW256
T MW0
- Tue May 24, 2011 2:23 pm
- Forum: SIMATIC system
- Topic: [?+]: cant see the comment for db68
- Replies: 2
- Views: 1830
Re: cant see the comment
Hi, First You have to check if You give symbolic name to data block (DB68). You should do this in Simatic Manager (right click on DB68 -> Object Properties and put Symbolic Name). Then in LAD/STL/FBD editor You should check View -> Display with -> Symbolic representation. Now You should be able to s...
- Tue May 17, 2011 11:28 am
- Forum: SIMATIC system
- Topic: [?]: TIA PORTAL, S7 1200 diagnostics
- Replies: 2
- Views: 6089
Re: TIA PORTAL, S7 1200 diagnostics
Hi,
Take a look SFC51 (RDSYSST - Read a System Status List or Partial List)
regards
Take a look SFC51 (RDSYSST - Read a System Status List or Partial List)
regards
- Sun May 08, 2011 1:08 am
- Forum: Other PLC
- Topic: [LINK]: IEC60870-5-101 & 104 Simulator & communication
- Replies: 7
- Views: 7318
Re: [Request] IEC60870-5-101 & 104 Simulator & communication
Hi,
Try here
http://products.trianglemicroworks.com/ProductPage.aspx
Software is not free, but You have three weeks full functionality. If someone have medicine for this software it will be good.
regards
Try here
http://products.trianglemicroworks.com/ProductPage.aspx
Software is not free, but You have three weeks full functionality. If someone have medicine for this software it will be good.
regards
- Tue Mar 22, 2011 11:53 am
- Forum: PLC's books
- Topic: [Request] IEC 60870-5-104 and IEC 60870-5-101
- Replies: 8
- Views: 20584
- Mon Mar 21, 2011 3:29 pm
- Forum: Other PLC
- Topic: [ReLINK]: IEC Standard Standards 60870
- Replies: 3
- Views: 4733
Re: [Request] IEC Standard Standards 60870
Hi, It is hard to find standard free to download. But You can find useful information about standard on http://www.prosoft-technology.com Go on Products->Stand-alone Gateways->Serial (or Ethernet) depends on standard variation You interested for. The lot of information You can find on https://www.au...
- Sun Mar 13, 2011 11:39 pm
- Forum: Siemens Hardware & Software
- Topic: Request: Switch ES Power for configuring 3WL circuit breaker
- Replies: 0
- Views: 5797
Request: Switch ES Power for configuring 3WL circuit breaker
Hi,
Do someone have Switch ES Power software for configuring 3WL circuit breakers.
kind regards
Do someone have Switch ES Power software for configuring 3WL circuit breakers.
kind regards
- Fri Feb 11, 2011 7:44 pm
- Forum: Other (only about CAD and Soft)
- Topic: Eplan Coil
- Replies: 7
- Views: 5459
Re: Eplan Coil
Hi,
Yes it is possible. Select Your good formated coil. Press Edit -> Copy Format. Then select coil which You want to modify. Press Edit -> Assign Format. That's all. By the way probably You have icon for format copying on Your toolbar.
regards
Yes it is possible. Select Your good formated coil. Press Edit -> Copy Format. Then select coil which You want to modify. Press Edit -> Assign Format. That's all. By the way probably You have icon for format copying on Your toolbar.
regards
- Fri Feb 11, 2011 12:12 am
- Forum: Other (only about CAD and Soft)
- Topic: Eplan Coil
- Replies: 7
- Views: 5459
Re: Eplan Coil
Hi,
Double click on coil. Go to Display tab. Press New icon and choose Device Tag (superior, without project structures). Press OK. Afterward, go with mouse over this new property and right click on mouse. Select Text -> Move property text and then drag this property above contact image.
regards
Double click on coil. Go to Display tab. Press New icon and choose Device Tag (superior, without project structures). Press OK. Afterward, go with mouse over this new property and right click on mouse. Select Text -> Move property text and then drag this property above contact image.
regards
- Thu Feb 10, 2011 12:06 am
- Forum: Other (only about CAD and Soft)
- Topic: Eplan Coil
- Replies: 7
- Views: 5459
Re: Eplan Coil
Hi,
Open eplan. Right click on coil and than select Properties. Go to Display tab. In lower right corner of this tab You have Contact Image: Press ... button placed right from Contact Image. Deselect Automatically aligned and specify X and Y position of contact image.
regards
Open eplan. Right click on coil and than select Properties. Go to Display tab. In lower right corner of this tab You have Contact Image: Press ... button placed right from Contact Image. Deselect Automatically aligned and specify X and Y position of contact image.
regards
- Mon Feb 07, 2011 7:34 pm
- Forum: Other (only about CAD and Soft)
- Topic: Eplan change project name
- Replies: 1
- Views: 2059
Re: Eplan change project name
Hi,
Open eplan. Select Project -> Management. In file structure find project which You want to rename. Select it and press Organize -> Rename (or simply F2 on selected file name). Put new name and that is all.
regards
Open eplan. Select Project -> Management. In file structure find project which You want to rename. Select it and press Organize -> Rename (or simply F2 on selected file name). Put new name and that is all.
regards
- Mon Jan 03, 2011 3:34 pm
- Forum: Other (only about CAD and Soft)
- Topic: EPLAN_P8_Schneider_Electric full
- Replies: 2
- Views: 6996
Re: EPLAN_P8_Schneider_Electric full
Select EPLAN_P8_Schneider_Electric.zip.001 in Total Commander and than Files -> Combine Files... select target directory
Thats all
Thats all
- Wed Dec 08, 2010 1:09 am
- Forum: Other PLC
- Topic: [?]: how to define (calculate) the coefficients Kp and Ti
- Replies: 1
- Views: 1471
Re: [?]: how to define (calculate) the coefficients Kp and T
Hi,
try google
ziegler nichols pid tuning
regards
try google
ziegler nichols pid tuning
regards
- Thu Nov 25, 2010 12:14 pm
- Forum: SIMATIC HMI
- Topic: [?]: wincc 7.0 sp2
- Replies: 4
- Views: 8031
Re: wincc 7.0 sp2
Hi Umencho,
How is it possible to download WinCC_V70SP2_download.zip on specified link. It is necessary to put some Lic.No.
regards
How is it possible to download WinCC_V70SP2_download.zip on specified link. It is necessary to put some Lic.No.
regards
- Tue Nov 23, 2010 11:21 am
- Forum: SIMATIC system
- Topic: [?+]: STL Code Explanation (reverse enginering)
- Replies: 10
- Views: 10206
Re: STL Code Explanation
It is obvious that code is related with indirect addressing, but how do You conclude that DW#16#84000000 is connected with indirect addressing. #SOURCE_BEGIN is Int L #SOURCE_BEGIN SLD 3 OD DW#16#84000000 T LD [AR1,P#6.0] L DW#16#84000000 T LD [AR2,P#6.0] I see no conncetion of DW#16#84000000 with i...
- Mon Nov 22, 2010 8:48 pm
- Forum: Siemens Hardware & Software
- Topic: [INFO]: S7-200,300,400 to Ethernet,CP5512 Express card
- Replies: 6
- Views: 14460
Re: New adapter!S7-200,300,400 to Ethernet,CP5512 Express ca
Hi,
According to number 3 You have Siemens solution: CP5711. For point 1 and 2 it is not clear which port of PLC will connect to?
regards
According to number 3 You have Siemens solution: CP5711. For point 1 and 2 it is not clear which port of PLC will connect to?
regards
- Mon Nov 22, 2010 8:45 pm
- Forum: SIMATIC system
- Topic: [?+]: STL Code Explanation (reverse enginering)
- Replies: 10
- Views: 10206
Re: STL Code Explanation
Hi,
Value DW#16#84000000 sounds to me that it is related with some time. If this is time in miliseconds then if You cut 3 LSB's then You have DW#16#84000 (value in seconds). If You devide this value by 60 (no of seconds in minute) then You have 1400minutes. Maybe something like that.
regards
Value DW#16#84000000 sounds to me that it is related with some time. If this is time in miliseconds then if You cut 3 LSB's then You have DW#16#84000 (value in seconds). If You devide this value by 60 (no of seconds in minute) then You have 1400minutes. Maybe something like that.
regards
- Sun Nov 21, 2010 12:42 am
- Forum: SIMATIC HMI
- Topic: [?]: IO field reading problem (WinCC Flexible)
- Replies: 1
- Views: 3407
Re: IO field reading problem (WinCC Flexible)
Hi,
It could be Your format pattern. You have to know which value You expect. Try for example to put s9999.9. Or maybe dimension of IO field is not sufficient. In Properties->Layout of IO field put check on Auto-Sizing.
regards
It could be Your format pattern. You have to know which value You expect. Try for example to put s9999.9. Or maybe dimension of IO field is not sufficient. In Properties->Layout of IO field put check on Auto-Sizing.
regards
- Thu Nov 18, 2010 8:21 pm
- Forum: SIMATIC system
- Topic: [?]: how to use and assign PID function with PLC ?
- Replies: 1
- Views: 1969
Re: [?]: how to use and assign PID function with PLC ?
Hi friend,
I think that this is little long story for one thread. Maybe You should first look in
http://support.automation.siemens.com
try to search PID temperature control or FB58 in mentioned site. There You also have some examples. Take care to put code for PID in OB35.
regards
I think that this is little long story for one thread. Maybe You should first look in
http://support.automation.siemens.com
try to search PID temperature control or FB58 in mentioned site. There You also have some examples. Take care to put code for PID in OB35.
regards
- Sat Nov 06, 2010 7:41 pm
- Forum: Other HMI
- Topic: [?]: i need a small hmi for s7-300
- Replies: 3
- Views: 3178
Re: [?]: i need a small hmi for s7-300
Hi,
You have SIEMENS Basic Panels KTP400 Basic Mono (3.8inch) on ethernet. Price 250eur.
kind regards
You have SIEMENS Basic Panels KTP400 Basic Mono (3.8inch) on ethernet. Price 250eur.
kind regards
- Mon Oct 25, 2010 10:42 pm
- Forum: SIMATIC system
- Topic: [?]: SAVE the actual value of DB's
- Replies: 8
- Views: 10515
Re: [?]: SAVE the actual value of DB's
Hi, That is really problem with S7-400. But if You have backup battery You have data retention. Problem is what to do if backup battery fail. You can specify M memory area as remanence in Hardware Configuration. Did You think about for example in OB35 to permanently store Your important data in M me...
- Mon Oct 25, 2010 5:27 pm
- Forum: SIMATIC system
- Topic: [?]: SAVE the actual value of DB's
- Replies: 8
- Views: 10515
Re: [?]: SAVE the actual value of DB's
Hi,
Why do You need to do so, because if You program S7-300 controller with MMC all data blocks are retentive. That means if Your PLC go down it will start up with last values.
regards
Why do You need to do so, because if You program S7-300 controller with MMC all data blocks are retentive. That means if Your PLC go down it will start up with last values.
regards
- Fri Oct 22, 2010 12:56 pm
- Forum: Other (only about CAD and Soft)
- Topic: [LINK]: Eplan P8 2.0.5.4602 + Crack
- Replies: 139
- Views: 680486
Re: [LINK]: Eplan P8 2.0.5.4602 + Crack
any body help me? I've just installed Eplan p8 2.05 on win 7 and it start normally but i can't find part management in tab utilities > part. I want create new part and make new device but i can't. here is imagine for my problem http://www.mediafire.com/imageview.php?quickkey=bza8yqu6spp34fc&thumb=4...
- Fri Oct 08, 2010 3:13 pm
- Forum: Other (only about CAD and Soft)
- Topic: [LINK] More EPLAN Electric P8 sample project
- Replies: 3
- Views: 11697
Re: [LINK] More EPLAN Electric P8 sample project
Hi,
EPLAN-DEMO.pdf are already delivered with Eplan.
If You install Eplan look in C:\Documents and Settings\All Users\Application Data\EPLAN\Electric P8\Projekte
regards
EPLAN-DEMO.pdf are already delivered with Eplan.
If You install Eplan look in C:\Documents and Settings\All Users\Application Data\EPLAN\Electric P8\Projekte
regards
- Thu Oct 07, 2010 7:50 pm
- Forum: SIMATIC HMI
- Topic: [?+]: WINCC FLEXIBLE SMARTACCESS
- Replies: 1
- Views: 3405
Re: [Request] WINCC FLEXIBLE SMARTACCESS
Hi,
WinCC Flexible Smart Access comes with regular installation of WinCC Flex. You need to check option Sm@rt Access: Web Service (SOAP) under Device Settings. License for Smart Access and latest EKB's You will find here
viewtopic.php?f=1&t=218
regards
WinCC Flexible Smart Access comes with regular installation of WinCC Flex. You need to check option Sm@rt Access: Web Service (SOAP) under Device Settings. License for Smart Access and latest EKB's You will find here
viewtopic.php?f=1&t=218
regards
- Tue Aug 31, 2010 10:41 pm
- Forum: PLC's books
- Topic: [?]:- NEED HANS BERGER's BOOK and SIMARIS REFEREnce Manual
- Replies: 1
- Views: 6016
- Fri Aug 06, 2010 12:13 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: How to edit a new symbol in eplan p8?
- Replies: 4
- Views: 4473
Re: [?]: How to edit a new symbol in eplan p8?
Hi,
You have to specify wright directory in Options -> Settings -> User -> Management -> Directories. Under Symbol You need to put appropriate path to Your symbol libraries.
regards
You have to specify wright directory in Options -> Settings -> User -> Management -> Directories. Under Symbol You need to put appropriate path to Your symbol libraries.
regards
- Wed Aug 04, 2010 4:44 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: How to edit a new symbol in eplan p8?
- Replies: 4
- Views: 4473
Re: new symbol in eplan
Hi, Do the following: Utilities -> Master Data -> Symbol -> New. Then You have to choose in which library You want to create new symbol. You can use existing library or create Your own (Utilities -> Master Data -> Symbol Library -> New). Then choose which variant of symbol You want to create (there ...