PLCforum.uz.ua

reymond_craig

Hi,

Please we help us here we also need to know if this set up will work.

Thank you very much

Warm regards,
Rey

reymond_craig

Hi,

Is there a way to bring back the uploaded blocks from cpu to CFC format.

I just wondering why when you upload program made from cfc you cannot get the cfc format you only get blocks.
This is hard for troubleshooting if you don't have the original backup.

Thanks.

reymond_craig

Thanks Umencho
but what i need is a program that can imediately get the password from .mwp file (s7-200) directly because cpu is far from my place.
thanks

reymond_craig

Please give me some information, my friend need to see the program tomorrow.

Thank you very much...

reymond_craig

HI,

I cant open a s7-200 file it is asking me to give password please give me the right tools to do the tricks on opening the program.
Once I double click the program it ask me immediately for the password.

Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hi,

First you can generate source block by opening your ladder editor then close the fc or fb you open then goto file generate source

2nd you can generate fb or fc from source block by compiling it.

Warm regards,
Rey

reymond_craig

Hi,

just use plc sim on your pg/pc interface and the use mpi as your conection between plc and hmi in your winccflex under communication.

With PLCSIM 5.4 you can use MPI/Profibus/Ethernet/CP connections !

Warm regards,
Rey

reymond_craig

Dear experts, Good afternoon, i have an Intouch project with S7-400 PLC. Now my question is, can we communicate Siemens PLC Sim 5.4 to Intouch. It seems PLC SIM is not communicating to my wonderware even you configure PLC Sim to run in ethernet. This will help me reduce my comissioning time if there...

reymond_craig

Hi,

Good evening,
i just want to ask if somebody here knows about multiplexing or have manuals of it.
Thank you very much

reymond_craig

Hi,

I was assigned to a project which uses schnieder quantum and advantys. I haven't use this before, can somebody share me some samples so that it will be easier for me to do the project.
by the way I need to use STBNIP2212 tcp/ip nim.
Thans in advance

reymond_craig

Hi, Good evening my friend is asking me a cheaper solution he can offer to his customer. His requirement is just to control the temperature with an analog control valve and he don't have yet temperature sensor and he will also purchase one. The requirement of the process is to automatically change t...

reymond_craig

Hi, I have problem downloading to op73micro, I have rs232pc/ppi cable. I noticed that on my wincc flex on download settings i can choose a baud rate of 57600 and 115200 only. And on my pg/pc interface ubnder pc/ppi i can only chose 9.6kbps,19.2kbps and 187.5kbps. What should be my settings in Wincc ...

reymond_craig

Hi,

Good afternoon, Can somebody please share an s5 license.

Thank you very much in advance.

reymond_craig

Hi, Good afternoon, This is my problem to be solve now, I develop a wincc Flex program on tp 177A 6". Now during simulation it is not supported so I decided to temporarily change the device setting to TP270 10", after changing to TP270 10" i also edited and added some objects. Now I'm ready to use i...

reymond_craig

Hi Emulefan,

Thank you very much for your help. I can't find a manual wherein the maximum data block number, functions were included all they have is the maximum number of them that you can use.

Thank you for your help. I may now start editing my project.

Thank you very much again.

Thanks,

reymond_craig

Hi, Good day, I already search the forum and havent found this, I'm worrying now on my future commisioning of a cpu 314C 2DP because I was able to use db1002 and Fc 737 in my program. My concern is is the this cpu capable of up to this data block number anf fc number during download.? Thanks and war...

reymond_craig

Hi,

I just want to know if it is possible to simulate Kepware with PLCSim 5.4.
I tried to make an ethernet network on my PLC and use its IP adress on Kepware PLC side but it don't works.
Please help here.

Thank you very much in advance.

reymond_craig

Hi,

Is there a PC Based automation that don't require license during operation on Plant?

Thanks,

reymond_craig

Hi,

How about on touch panel is the re a way to reset it to factory defaults?

Thanks,

reymond_craig

Hi PLC_ITA,

Can you gave me a sample on how to do this kind of trick. Your help will be much appreciated.

Thank you very much in advance.

Regards,

reymond_craig

Hi,

Is there a way to display the current log on user on wincc flex?

Thanks in advance.

Regards,

reymond_craig

Hi, I'm having problem on win setup. Initially I can logon as an administrator using a user name administrator and password admin . I got an error <process already exited> has generated errors and will be closed by windows. You will need to restart the programs. And also anybody have knowledge on sa...

reymond_craig

Hi, Good afternoon I need to upload PLC Program using my memory card. I used retrieve from memory card but an error occured that there's no available usb/serial. How can I success uploading from memory card? Also is there a way you can get symbols and comment from plc? Thanks and warm regards, Beggi...

reymond_craig

Dear bond,

I'm sorry to say that I don't have.
Is it going to work even without license?

Thank you very much in advance

Thanks

reymond_craig

Hi,
Is there anyone who have SAAB Tank master software and Manual?
Thank you very much in advance

reymond_craig

Thank you , this helps,
Im using step7 5.4.
Thanks

reymond_craig

Hi anybody have gsd file for this simatic device (ET 200L 133-1BL01-0XB0)?

Is the actual device will work if I put ET 200L 133-1BL10-0XB0 in hardware config?

Thanks,
[/b]

reymond_craig

I think m200.7 goes to 1 in network 1 and 2 in all cycle if both of their RLO is 1, and m200.7 will be 0 after network 2 if RLO of network 2 is 0 whatever is the RLO of in network 1. If you used this bit on other fc it will always look on status of m200.7 in network 2. I think this one don't have mu...

reymond_craig

Thank you very much Tomekk, by the way do you have this software? And what is the role of this .pb5 file on my s5 program?

Thank you very much in advance...

reymond_craig

Hi good AM,

I just want again to seek help from this forum on how to open this file. ( .pb5) maybe this is s5 file.

reymond_craig

Hi,

I tried to search the forum but I can't see io server for SLC PLC.
Anybody who have this please share it.
Thank you very much.
Or just give me other options on how to communicate slc to wonderware version 10.
Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hi,

Please advise on how to solve this tricky problem, on other laptop in the office data block displays the " Actual Value" column but on this laptop of my friend It doesn't show. Anybody who can give advise to solve this,?
Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hi nico7773,

Thank you very much for your help,
can I ask for your help to give me some detailed procedure on how to do this.
like opening this port 102.
Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Dear friends,

Good afternoon I just want to know if we can service or monitor PLC using internet with simatic cp343-1. Thank you very much.

Warm regards,
Rey

reymond_craig

Hi, Good afternoon, sorry for posting this here. I will be on a project of a desalination plant that uses a reverse osmosis with size of 25 by 277 meter. I will be incharge on instrumentation or process. Anybody who knows what should I know or somebody who have detailed process and instrument, param...

reymond_craig

Hi Umencho and mech962784,

I success installing opclink but when I'm installing the opc tag creator I can't finish because it gaves me an error Failed to create INU File Set up will abbort now.

Thank you for your future help.

reymond_craig

Hi Umencho, I'm really sorry if I disturb you much, but i really don't know where this error of conversion coming from, but the result is not that what we expect. It give me still the max. EU. I attached the link( Link_is_Dead :(/84440219/Problem_Scale1.bmp ) what i did on the tag, the background is...

reymond_craig

Hi Umencho and Bunglehead, I already did the scaling inside the plc using fc105, and also put the same value to EU and Raw, but the result is a small change in my data in PLC gives the Max. EU. but when I round my data in PLC and used double integer it works fine but the problem now is there is no d...

reymond_craig

Hi Umencho,

This is really strange, still don't work here. I don't know what I should do, but is this historical data going to update by this even there is no change in process variables? Thank you very much.

Warm regards,
Rey

reymond_craig

Hi mech962784,

Thank you, do you have this add ons software, I can't see using search.

Warm regards,
Rey

reymond_craig

Hi Umencho, You already gave me lot of help from my other questions,. This is what happening right now communication of tag I think it's no problem. The problem now is what should be my min. raw and max raw. May min EU is 0 and my max. EU is 15000. By playing with the value of Raw it gave me values ...

reymond_craig

how about kepware to intouch? Thank you very much.

Warm regards,
Rey

reymond_craig

to abdelhadi.mousta,

If you just want to monitor data inside your plc you can just go to set pg/pc interface and choose TCP/IP auto with your network card, then you can try it monitoring now.

Warm regards,
Rey

reymond_craig

HI mech962784, I have opc server and plc, but I don't know how can i provide my data from opc server(Kepware) to my scada (Intouch 9.5). Can You give me idea on how to do this? P.S. I'm currently connected to the plc thru DA Server but I want to know it also using opc server. Thank you very much. Th...

reymond_craig

hi,

By the way when I tried to dispaly this it gave erratic result, a small change in my value at plc gives the max value at intouch.

Thanks and warm regards,
Rey

reymond_craig

Hi Umencho, I Thank you for your support but I still can't do for some reason, The checkbox is already working with the tag HistTrend_RealTime I already check this by using a light. I have two Hist Trend tag type but I can't delete one of them( I'm suspecting that one of them makes the conflict) eve...

reymond_craig

Hi,

Good morning,
I just want to ask if we can display real numbers in intouch,
I can display integer but not real.
Is somebody alreaady display real numbers in intouch? I hope we can, thank you very much.

Thanks and warm regards,
Rey

reymond_craig

Hi Umencho,

I don't know why It don't work on me, did i need to put the same script as you gave me before(IF HistTrend_RealTime THEN HTUpdateToCurrentTime("HistTrend"); ENDIF;) to window script?

Thanks and warm regards,
Rey

reymond_craig

hi umencho,

Thank you for your help, I tried the script but it don't work on mine.
I'm using intouch 9.5.
I hope you know other solution.

Thanks and warm regards,
Rey

reymond_craig

Hi Umencho, Thank you for your help, the problem was solved, I just explore the archestra and i found out that i can put another cp on the same node(just right click on New_PortCpS7_000 and insert cp), i thought i need another node for another cp. It's success right now. I have one more question, I ...

PLCforum.uz.ua

Search found 139 matches

[?]: Convert uploaded blocks to CFC

[?]: How unpassword s7-200 file ?

[?]: Siemens PLC Sim communicate with Wonderware

[?]: How Multiplexing digital signal ?

[?]: Sample of Schnieder quantum plc program and Advantys ?

[?]: suggest cheap solution to control the temperature

[?]: How to Download to op73micro

[?]: S5 license

Problem when device change back from tp270 10" to tp177

[?]: 314C 2DP Maximum number of DB and FC

[?]: is possible PLCSim 5.4 Simulation with Kepware ?

[?]: PC Based Automation That don't need license

[?]: Display Current user

[?]: Uploading From memory card

Request: SAAB Tank Master Software

[?+]: ET 200L 133-1BL01-0XB0 GSD File ?

[?]: .pb5 what is this file and how I can open this?

Request: Intouch IO Server for SLC PLC's

[?]: Actual Value Column in Data block is missing

[?]: Service s7 PLC using CP-343 via internet

[?]: De-Salination Plant using reverse osmosis

[?]: How display real numbers with INTOUCH ?