PLCforum.uz.ua

reymond_craig

Hi Umencho, Thank you for your help, the problem was solved, I just explore the archestra and i found out that i can put another cp on the same node(just right click on New_PortCpS7_000 and insert cp), i thought i need another node for another cp. It's success right now. I have one more question, I ...

reymond_craig

Hi, i have a problem connecting Intouch to two S7300cp 343-1, i can connect to one of the plc but cannot at both. I already configure them both have at archestra, and also with access name. Is this possible to connect on two cp, or i need to throw my data to the other cp and then communicate on that...

reymond_craig

Hi,

Good afternoon,
I have Micrologix 1000 here but I dont have interface cable.
Did any friend here who can tell us how to interface my laptop and download my program using a custom interface cable.

Thank you very much in advance.

Thank and warm regards,
Rey

reymond_craig

hi to all,

I can see on the help this matter. Ive read somewhere that wonderware have other tools to convert this file (.lgh and .idx) to excell. Anybody have those software. Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hi Gene,

Thank you, I will study it first and when I have question I'll back to you again. Thanks

Warm regards,
Rey

reymond_craig

Hi Gene,

Thank you for response, do you have this tool or it is already included on intouch 9.5? If you have can you share it to us, this will make my life easier.

Thanks and warm regards,
Rey

reymond_craig

Hi, Good morning I just want to ask if somebody have Brainwave program,. Sorry to the administrators if i post it here,i just post it here because i'll be using it with simatic plc. P.S. As well as Malkam software if somebody has this. (Online Moisture reader) I hope somebody have this. Thank and wa...

reymond_craig

Hi,

Good morning I just want to ask if somebody has a tool to export or convert historical data to excell?

Thanks and warm regards,
Rey

reymond_craig

hi bunglehead, Thank you very much to all of you, i missed something since you mention double integer, i find a way to convert my real value the result from scale fc5, i just round it and the result is dint. it is working now, thank you very much to all. I hope i can find your help again the next ti...

reymond_craig

hi, Can i just leave -32767 to minimum EU and 32767 to max EU sa well as in Min and max Raw? I am using S7 317-2DP. I think communication with my MD344 is ok but the trick is it display the decimal value of my real value in PLC. Can anybody knows how to display the real value in wonderware? Thanks a...

reymond_craig

Hi, Good morning, hope this morning will be good to me also. I try them but still i got this, the one that the wonderware display is the tag value in decimal, i want to display the value in real form. My tag is already set as io real on type but still the tag display in decimal form not in real valu...

reymond_craig

hi bunglehead, Thank you again for your response,... I try to do what you say to me but it don't show me any value in wonderware if i put i before md344. I'm communicating intouch through DASSidirect, i think 'm not using opc server here. Thank you very much, we can still solve this problem. Warm re...

reymond_craig

hi, Thank you very much for the info, but this one is strange when i tried to go to runtime ( I used MD344 as item name) It always give me value that is equal to Max EU. 2nd is it the same the update on trend value of real time and historical. I like it to be historical but acts like a real time(wit...

reymond_craig

Hi Frankw, Thank you for your reply, i already ok with my address on word, but my problem now is on my double word. Every time i change the value of a doubleword in my plc it gives me a value 32767, i don't know why this happen. I used address for item name MD344 Another question regarding on histor...

reymond_craig

Hi, Good morning, I just want to ask those who know how I can put the address of siemens to item name of wonderware for example, m0.0 I put mx0.0 but I don't know on other data type like for word, Dword. Please help me out here. Siemens Address Item Name (Wonderware) Db1000.dbd20 ? Db1000.dbw30 ? Mw...

reymond_craig

Hi,
I read something about this forgot where, Ill tell you once i recall it. It says that there are only supported (ex20-0aa0)that can be seen on the accessible nodes,. Are you able to ping the ip adress of the cp from your PG? If yes can you monitor the status of the PLC?

Warm regards,
Rey

reymond_craig

Hi Galli,

I found it, the cause of the tricks is my panda antivirus.

Thank you very much for all of the helps.

reymond_craig

Hi Galli,
I don't config the dcom as because i don't know what will be the effect after configuring it.
Could anybody have some more idea on this?

Warm regards,
Rey

reymond_craig

Hi PLC_ITA,

Hi I just want to say thank you for this resources I just finished downloading your emerson deltav v8.3.

To all members of this forum where we can get license for this software even a demo version could help.

Warm regards,
Rey

reymond_craig

Hi, The default password for Touchscreen MP370 is 100, if you are sure you have the existing downloaded program, you can take a look at first open your protool project then go to system - settings you can see what is the OP supervisor password. Try to used this password when you are promted on the t...

reymond_craig

Hi,

Thank you very much Umencho, your the man....I mean your a great man

.... I try the links and study the manuals. Once again thank you very much Umencho.

Warm regards,
Rey

reymond_craig

Hi Umencho, Yes some of my friends told me also that it's easy to use intouch but I think I should also study Wincc because our main plant in US is also using Wincc. Right now most of our PLC systems here is siemens, I'm using s7-300 and MP 370. Do you have an easy to understand manuals for wincc an...

reymond_craig

Hi Galli,

Where I can adjust the settings for DCOM? What could be the worst possible effect when I adjust it wrong? Thank you Galli.

Warm regards,
Rey

reymond_craig

Hi PLC_ITA, Good evening, I already tried to turn off windows firewall of my computer but still it connect only once. I'm now thinking of the port to be added on allowed on firewall because I have read something that even the firewall is off some of the ports are still close, i'm afraid that the por...

reymond_craig

Hi Umencho,

Thank you very much Umencho, we did it, communication is already working. What i need to do now is to look on wincc and compare the two so that i can choose which to buy and used in our factory.

Thanks,

Warm regards,
Rey

reymond_craig

Hi,

Thank you for the link.

Warm regards,
REY

reymond_craig

Hello, Good day, I have problem communicating my Laptop to S7300 CP 343-1. I can only monitor once but after I terminate it I cannot monitor it again, after that I tried to ping the IP adress of the CP and still I get replies but still cannot monitor. When I close the program and open it again same ...

reymond_craig

Hello, Thanks Pracker, I think I should try this too. It looks interesting. By the way, if I'm going to transfer many data does it means that I need to repeat to call this sfc's in my ladder editor, because i think it only transfer 1 byte per call. And I can't undrstand that much what should I put o...

reymond_craig

Thank you for all of your sugestion. I'm trying to use DASidirect Sir,. Do I need make new access name when I'm defining tag or I just going to use galaxy? If I'm going to define new access name what should be the application name when I'm using DASIDirect. One more thing I can't find the wwclient i...

reymond_craig

Hi,

Yes i've tried to use IO server sir but I the log on SMC is Invalid item name: M0.0 (PLC1). I can't find as of now the reason for this error.

I hope you have an idea. Thank you very much for response.

Warm regards,
Rey

reymond_craig

Hello,

Good day, I just want to ask for your help on how to do the communication of intouch to s7 cp343-1. What are the thing i need to configure and what are the programs i needed to install.

Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hello,

Hi friends, can I ask for your help where I can find the installer for this program (SIMATIC NET COML S7 ). I hope somebody have this.
Thank you very much in advance.

Warm regards,
Rey

reymond_craig

Hi Sir,

Thanks for the useful links. This will help me to improve my knowledge on siemens automation system.
Thank you very much.

Warm regards,
Rey

reymond_craig

Hi Gregar,

Thank you very much for the tool that you gave. This will really helps I have PC with floofy drive I could used it. Thank you very much again..

Warm regards,
Rey

reymond_craig

Hi Juli,

I really want to thank you very much for the help. I really appreciate it. I hope this can help me to learn and my friends also who really needs this one in one of his project. Once again thank you very much.

Warm regards,
Rey

reymond_craig

How to do it in Intouch Sir? Thanks

reymond_craig

Can somebody help me where I can find documentation for master slave configuration of two S7300cpu? Is it posible for two S7300CPU? Can somebody gives some idea on what's going on in master slave configuration of two s7300 cpu? Thanks alot.

Thank you very much in advance.

reymond_craig

Good morning, I just want to ask for some help on how to gather data on other s7300 cpu w/out using cp.
Is it posible to get using profibus DP only?
Do I need some Standard FC? Please, your help will be much appreciated.

Thank you very much in advance.

reymond_craig

Please help Is there anybody knows how to transfer license of RSLogix without using floofy disk drive.

Thanks in advance....

PLCforum.uz.ua

Search found 139 matches

[?]: Connecting to two PLC using DASSIDIRECT

[?]: Micrologix1000 interface cable

[?]: Brainwave Connection to S7-300PLC

[?]: Tools To Export Historical Data of Wonderware to Excel

[?]: Wonderware Addressing of Siemens Memory

[?]: Problem communicating PC to S7300 Cp

[?]: Linking Intouch 9.5 to S7 343-1 cp

[LINK]: SIMATIC NET COML S7

[?]: Master Slave Documentation

[?]: s7-300CPU to s7300CPU Communication using DP Only?

[?]Transfer of RSlogix License W/out using Floopy disk drive