Search found 675 matches

by Linkinx64
Wed Jul 18, 2012 6:33 am
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

Re: [?+]: unPassword Step7-Micro/Win S7-200 Project

Could you tell me the password of this file, pls?? It's really important for me, thank you!! https://rapidshare.com/files/3530978013/FARRIER_Utillaje_taladro_v5recup.mwp Password: 1356 (for all POUs) would like to know de password of the POU 6 (Com_descarte), of the S7-200. Is it possible? The prog...
by Linkinx64
Mon Jul 16, 2012 9:05 am
Forum: Other HMI
Topic: [?]: BACK UP KEY for a ABB digivis scada software
Replies: 12
Views: 9722

Re: [?]: BACK UP KEY for a ABB digivis scada software

What is a file that makes Digivis working can be?
Digivis is activated by insert dongle to the USB hole or LPT port. No additional files required.
If this is not "License mode" patch... I have no idea what "digivis people" can give you else.
Upload when you get it. A very interesting!..
by Linkinx64
Mon Jul 16, 2012 4:50 am
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

Re: [?+]: unPassword Step7-Micro/Win S7-200 Project

oldsnake wrote:hello
please help unlock password
http://file2.uploadfile.biz/i/IDENMEIMIIEZXD
thank
Password: 7602 (for all POUs)
by Linkinx64
Sun Jul 15, 2012 5:30 am
Forum: Other PLC
Topic: [LINK]: Control Builder A 1.3 Software
Replies: 14
Views: 15768

[LINK]: Control Builder A 1.3 Software

(* updated from 4/30/2014 *) Control Builder A 1.3/1 Software: tools for maintenance and commissioning ABB AC400 series PLC Application Builder 4.2/0 Bus Configuration Builder 3.1/0 Function Chart Builder 6.3/1 Online Builder 3.1/1 http://www.filefactory.com/file/7ch9ck5ubtj5/Control_Builder_A_1.3-...
by Linkinx64
Fri Jul 13, 2012 12:44 pm
Forum: Utilites
Topic: [TOOL]: TMW 61850 Test Suite
Replies: 9
Views: 22050

Re: [TOOL]: TMW 61850 Test Suite

My primary work is not connected with power generation and substation automation.
Neither ABB OPC61850 nor Matricon or SISCO no need for me.
However, if I get any information (about Matricon OPC for IEC 61850 full) I will post it here or PM to you.
by Linkinx64
Fri Jul 13, 2012 10:06 am
Forum: Other PLC
Topic: [?]: ABB 800xA restore errors
Replies: 22
Views: 9055

Re: [?]: ABB 800xA restore errors

if i want to get the install files of 3/5/6/8 above,how can i do? Request it from the system owner or from ABB (BU Metals). is "Process Graphics 2 for 800xA SV5 SP2" in point 1 the same as the one in "IIT800xA-50SP2PG,3BSE055829R1 C" CD? Not sure about document ID (3BSE055829R1 C) but I guess - yes...
by Linkinx64
Fri Jul 13, 2012 6:26 am
Forum: Other PLC
Topic: [?]: ABB 800xA restore errors
Replies: 22
Views: 9055

Re: [?]: ABB 800xA restore errors

This error means that some of system extensions (used in the system) are not installed on your PC. You must install all of extensions specified in this window in order to complete restore successfully. Something about these extensions, where can you get and installation order: 1. ABB Operation Graph...
by Linkinx64
Fri Jul 13, 2012 3:56 am
Forum: Other HMI
Topic: [?]: BACK UP KEY for a ABB digivis scada software
Replies: 12
Views: 9722

Re: [?]: BACK UP KEY for a ABB digivis scada software

Hi

What kind of file they're sent? I don't know it.
Backup USB first and upload to let us see it (tyou)
by Linkinx64
Thu Jul 12, 2012 4:40 pm
Forum: Other HMI
Topic: [?]: unPassword Wellintech KingView 6.53 Project
Replies: 17
Views: 23340

Re: [?]: unPassword Wellintech KingView 6.53 Project

100% completed message - a half of the answer.
by Linkinx64
Thu Jul 12, 2012 10:20 am
Forum: Utilites
Topic: [TOOL]: TMW 61850 Test Suite
Replies: 9
Views: 22050

Re: [TOOL]: TMW 61850 Test Suite

No. Why do I need this?
by Linkinx64
Tue Jul 10, 2012 3:30 am
Forum: Other HMI
Topic: Request: ABB Power Generation Portal 4.1 sp3 crack
Replies: 10
Views: 13546

Re: Request: ABB Power Generation Portal 4.1 sp3 crack

Public licenses are temporary.
Permanent license required "Machine ID" different than DEMO.
by Linkinx64
Sun Jul 08, 2012 6:53 am
Forum: Other PLC
Topic: [?]: analog input in ABB Compact control builder 800m
Replies: 3
Views: 2901

Re: ABB Compact control builder 800m

I guess it means that the channel is activated and incoming signal value transferring to the connected variable (RealIO).
If the channel deactivated (activate channel = false) the incoming signal is ignored.
by Linkinx64
Thu Jul 05, 2012 11:56 am
Forum: Other PLC
Topic: [?]: connect 4-20 m to ABB analog input module AI801
Replies: 5
Views: 3993

Re: [?]: connect 4-20 m to ABB analog input module AI801

There are 2 inputs for each of channels as far as I know: one is N+ (where N - is a number of channel) another is NI (current input).
Each of N+ is connected to the L+ (24V DC). So how many volts do you expect to measure between N+ and NI if not 24?
by Linkinx64
Thu Jul 05, 2012 10:48 am
Forum: Other PLC
Topic: [?+]: AC800M profibus module
Replies: 4
Views: 2939

Re: AC800M profibus module

CI854 communication module (Profibus-DP) and LD800P (DP/PA linking device).
by Linkinx64
Thu Jul 05, 2012 7:07 am
Forum: Other PLC
Topic: [?+]: AC800M profibus module
Replies: 4
Views: 2939

Re: AC800M profibus module

I don't understand what kind of profibus module do you have in mind...
by Linkinx64
Thu Jul 05, 2012 6:57 am
Forum: Other PLC
Topic: [?]: connect 4-20 m to ABB analog input module AI801
Replies: 5
Views: 3993

Re: [?]: connect 4-20 m to ABB analog input module AI801

24V is service voltage, it's always like this for all low voltage IO. But load resistance is different. So, if the module is not reconfigurable as INPUT/OUTPUT (when you can set module terminal in software as IN or OUT) - no you can't connect power consuming device to the analog input. Possibly the ...
by Linkinx64
Thu Jul 05, 2012 6:38 am
Forum: Other PLC
Topic: [?+]: ABB AC800M terminators
Replies: 2
Views: 2372

Re: ABB AC800M terminators

It is not critical if the last module not terminated.

For module bus you may weld like this:
Image

For CEX-bus (like parallel port, using for communication modules) - I don't know.
by Linkinx64
Wed Jul 04, 2012 5:01 am
Forum: Other HMI
Topic: [LINK]: Power Generation Portal 4.1 License file
Replies: 15
Views: 17506

Re: Request: Power Generation Portal 4.1 License file

Qiaopeng1231 wrote:Who have the PGP V4.1 SP3 Software Install files ?
http://www.filefactory.com/file/1yanenua64pb
by Linkinx64
Wed Jul 04, 2012 4:55 am
Forum: Other HMI
Topic: Request: ABB Power Generation Portal 4.1 sp3 crack
Replies: 10
Views: 13546

Re: Request: ABB Power Generation Portal 4.1 sp3 crack

Please, I need crack or license file for PGP Power Generation Portal 4.1. sp3 crack or license About http://www.abb.com/industries/db0003db004332/c12573e700330587c1256fda0045a4c0.aspx Here: FEATURE PGP_DR ABBEAlm 4.1 21-DEC-2012 15 85a26f91d168459e4b7feed6277f9557 111111111111111 DEMO FEATURE PGP_N...
by Linkinx64
Tue Jul 03, 2012 12:37 pm
Forum: Other PLC
Topic: [?]: connecting ABB panel 836 with plc ac800m (851) through
Replies: 3
Views: 2621

Re: ABB panel 800

omar zedan wrote:-I connected port 1 in plc to the panel using ethernet cable.
Did you connect PLC directly to the panel or through the ethernet hub? In case of direct connection it won't work - you need crossover cable.
by Linkinx64
Tue Jul 03, 2012 5:07 am
Forum: Other PLC
Topic: [LINK]: ABB PLC 907 AC 1131 V5.0 (CoDeSys V2.3 SP2)
Replies: 23
Views: 44901

Re: [LINK]: ABB PLC 907 AC 1131 V5.0 (CoDeSys V2.3 SP2)

You have to use 907 PC 331. This is an old DOS tool for AC31/CS31, is hard to find, install and use.
You'd better contact PLC supplier.
by Linkinx64
Tue Jul 03, 2012 4:20 am
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

Re: [?+]: unPassword Step7-Micro/Win S7-200 Project

vjcaes wrote:can anybody unlock the POU's in the project I link?

https://www.dropbox.com/s/jn8036zh0equn ... 110612.mwp
Password = 5954 (* for all POUs *)
by Linkinx64
Fri Jun 29, 2012 6:04 pm
Forum: Other PLC
Topic: Request: ABB Panel 800
Replies: 1
Views: 2941

Re: Request: ABB Panel 800

You can try this thread too: viewtopic.php?f=46&t=17989 {(PP800 builder 5.1-1 on VMWare)}
by Linkinx64
Fri Jun 29, 2012 3:47 am
Forum: Other HMI
Topic: [?]: BACK UP KEY for a ABB digivis scada software
Replies: 12
Views: 9722

Re: [?]: BACK UP KEY for a ABB digivis scada software

But HASP dongle should not be detected as a drive...
Dongle usually requires a driver to be installed to the system. Driver software supplied with DigiVis.
by Linkinx64
Sun Jun 24, 2012 6:01 pm
Forum: Other PLC
Topic: [LINK]: ABB PLC 907 AC 1131 V5.0 (CoDeSys V2.3 SP2)
Replies: 23
Views: 44901

Re: Request: ABB PLC 907 AC 1131 V5.0 (CoDeSys V2.3 SP2)

The Links are marked as dead. do you have other links ? I have downloaded one of those from the links above long time ago. For some library "maintenance"... but forgot which one: limited or full. Here are the links on package: AC1131V51.part1.rar AC1131V51.part2.rar AC1131V51.part3.rar AC1131V51.pa...
by Linkinx64
Tue Jun 19, 2012 10:32 am
Forum: Other HMI
Topic: [?]: BACK UP KEY for a ABB digivis scada software
Replies: 12
Views: 9722

Re: [?]: BACK UP KEY for a ABB digivis scada software

Digivis using HASP dongle, so you can try to dump the dongle as it is described in the topic below:

viewtopic.php?f=7&t=13472&start=50#p46338

Just skip the 9th step.
P.S. Upload your dongle dump (.REG or .FST) on forum when finished.
by Linkinx64
Tue Jun 12, 2012 3:37 pm
Forum: Other PLC
Topic: [?+]: unPassword Library in ABB Compact Control Builder
Replies: 201
Views: 291553

Re: [?+]: unPassword Library in ABB Compact Control Builder

puppy75 wrote: sorry for delaying in my replay, but unfortunately I lost your posted password
(clap) Go look for where you lost it
by Linkinx64
Tue Jun 12, 2012 3:32 pm
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

Re: [?+]: unPassword Step7-Micro/Win S7-200 Project

shara_ks wrote:plz help me how to remove the step7 microwin pou password plz help me unpassword plz help me sir
kn14 (for all POUs)
by Linkinx64
Mon Jun 04, 2012 8:47 pm
Forum: Other PLC
Topic: [?+]: unPassword Library in ABB Compact Control Builder
Replies: 201
Views: 291553

Re: [?+]: unPassword Library in ABB Compact Control Builder

SOULHACK wrote:the CommunicationLib 1.0-0

Code: Select all

CpiwkK7653
by Linkinx64
Thu May 17, 2012 5:39 am
Forum: Other PLC
Topic: [LINK]: ABB 800xA PCDeviceLib 5.2-0
Replies: 20
Views: 12565

Re: [LINK]: ABB 800xA PCDeviceLib 5.2-0

I have a licensed version of PCDeviceLib 5.2 and have been using the 3 pump duty/standby control module. We're adding a 4th pump now. Does anyone know if there is a 4 pump version available in a future release? In the v5.4 still control module for 3 motors. In the further releases - don't know, I g...
by Linkinx64
Wed May 16, 2012 1:24 pm
Forum: Other PLC
Topic: [LINK]: ABB Freelance_800F_V8.1-DEMO
Replies: 3
Views: 6599

[Link] ABB Freelance 800F V8.1 SP1 +UNDEMO

Who was asking here for Freelance 8.1 and crypt.dll before forum disk dead?
Links here:
Freelance_800F_v8.1_SP1.part1.rar (dlink)
Freelance_800F_v8.1_SP1.part2.rar (dlink)
by Linkinx64
Wed May 16, 2012 8:28 am
Forum: Other PLC
Topic: [?]: ABB AC800M and CAN Bus
Replies: 1
Views: 2172

Re: [?]: ABB AC800M and CAN Bus

No software/hardware for CAN bus exist in AC 800M system at the moment.
CAN bus coupling with AC 800M sometimes possible throught the Profibus-CAN (or Modbus-CAN) gateways only. Manufacturer will provide you gateway configuration software.
by Linkinx64
Thu Mar 01, 2012 4:07 pm
Forum: Other HMI
Topic: [?]: How crack or unlock Weintek HMI (Easy View) password
Replies: 58
Views: 126005

Re: [?]: How crack or unlock Weintek HMI (Easy View) passwo

Can I have an access with administrative rights to the target PC with EasyBuilder (connected to Weintek HMI) through the TeamViewer? From 6am to 3pm Moscow time
by Linkinx64
Wed Feb 29, 2012 12:01 pm
Forum: Other HMI
Topic: [?]: How crack or unlock Weintek HMI (Easy View) password
Replies: 58
Views: 126005

Re: [?]: How crack or unlock Weintek HMI (Easy View) passwo

Very sad pictures... Data variance in IN blocks is almost 100%.
Is that RSA encryption or something?

Need use debugger. I will check the software insides and let you know. It will take a while...
by Linkinx64
Tue Feb 28, 2012 5:42 am
Forum: Other HMI
Topic: [?]: How crack or unlock Weintek HMI (Easy View) password
Replies: 58
Views: 126005

Re: [?]: How crack or unlock Weintek HMI (Easy View) passwo

I don't see it too... This is either hashes or encoded data or unknown set of symbols. Try to do the follow steps: 1. Try to retrieve the project using wrong password "3333" twice. So, it will be 2 logs. This will let us know which symbols need to ignore. 2. Try to retrieve the project using wrong p...
by Linkinx64
Sun Feb 26, 2012 4:24 pm
Forum: Other HMI
Topic: [?]: How crack or unlock Weintek HMI (Easy View) password
Replies: 58
Views: 126005

Re: [?]: How crack or unlock Weintek HMI (Easy View) passwo

Hi ASU_Slava

At least I need to see the logs of Bus hound/usb monitor: one log when you attempt to download project with wrong password, another log - panel reply.
by Linkinx64
Wed Feb 22, 2012 6:09 am
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

Re: [?+]: unPassword Step7-Micro/Win S7-200 Project

Hello
Evgeniy24rus wrote:Hello, help please with password S7-200 Micro-Win
http://www.2shared.com/file/Hsu-lYMI/PD_8000_1_VA.html
J6W8 for ETH1_CTRL and ETH1_XFR, POUs under the "Wizard" group
3597 for all remaining POUs
by Linkinx64
Mon Feb 20, 2012 4:04 am
Forum: Other PLC
Topic: [?+]: 800xA System Graphic element deploy?
Replies: 11
Views: 5692

Re: [?+]: 800xA System Graphic element deploy?

I have checked collection and backup: unfortunately, boiler project (for 800xA) wasn't saved :(

If only Sam still have that archive...
by Linkinx64
Sat Feb 18, 2012 3:44 am
Forum: Other PLC
Topic: [LINK]: ABB 800xA PCDeviceLib 5.2-0
Replies: 20
Views: 12565

Re: [LINK]: ABB 800xA PCDeviceLib 5.2-0

Latest version of PCDeviceLib is 5.5-1.
If you have it - kindly upload for unpassword.
See private msg.

Thanks and regards, Linkinx64
by Linkinx64
Fri Feb 17, 2012 4:03 am
Forum: Other Books
Topic: IEC standards
Replies: 34
Views: 99158

Re: IEC standards

by Linkinx64
Thu Feb 09, 2012 10:06 am
Forum: SIMATIC system
Topic: Request: M7-SYS RT V5.0
Replies: 4
Views: 4662

Re: [?]: M7-SYS RT V5.0

Can anyone upload M7-SYS RT V5 for Step7 please?
by Linkinx64
Mon Feb 06, 2012 5:00 am
Forum: Other PLC
Topic: [LINK]: 800xA SV5.0 SP2 and 800xA Simulator 5.0.2/5 License?
Replies: 17
Views: 19901

Re: [LINK]: 800xA SV5.0 SP2 and 800xA Simulator 5.0.2/5 Lice

Hello, Sam

License crack for 800xA SV5.1 Rev.A (CLS 5.1.0/1) http://www.4shared.com/rar/NLvVtqe1/sv5 ... ypass.html include necessary entries for the ITS.
by Linkinx64
Sun Feb 05, 2012 4:36 am
Forum: Other PLC
Topic: [LINK]: ABB S+ (Symphony™ Plus) DCS
Replies: 30
Views: 37043

Re: Request: ABB S+ (Symphony™ Plus) DCS

Engineering HMi in S+ (training): http://www.4shared.com/zip/ao__S4L6/Sym ... P_Mel.html
Your bonus.
by Linkinx64
Sat Feb 04, 2012 4:50 pm
Forum: Other PLC
Topic: [LINK]: ABB relays PCM600 Engineer Pro with IEC61850
Replies: 31
Views: 46037

Re: [LINK]: ABB relays PCM600 Engineer Pro with IEC61850

hina wrote:Could you Please Re upload CCT 4.1.3 because the link already dead
Link is alive. Another link is: http://www.4shared.com/zip/kTMdpPxd/CCT ... _Conf.html
by Linkinx64
Wed Feb 01, 2012 4:15 am
Forum: Other PLC
Topic: [?+]: unPassword Library in ABB Compact Control Builder
Replies: 201
Views: 291553

Re: [?+]: unPassword Library in ABB Compact Control Builder

elcole wrote:It would be possible to unPassword the controlsimplelib 1.0-4

Code: Select all

jKgafJK
by Linkinx64
Tue Jan 24, 2012 4:48 pm
Forum: Other PLC
Topic: [LINK]: ABB relays PCM600 Engineer Pro with IEC61850
Replies: 31
Views: 46037

Re: [LINK]: ABB relays PCM600 Engineer Pro with IEC61850

I downloaded CCT 4.1.3, patched it. It is working but, when I try to import ICD file, appearing "key not found " message. I had imported a couple ICD files for test: no any "key not found" message or other warnings I got. Could you upload your ICD to let me try? Worst of all is IET Tool 5.1 and ITT...
by Linkinx64
Sun Jan 22, 2012 10:30 am
Forum: Other PLC
Topic: LINK: User Documentation of Advant OCS with Master software
Replies: 35
Views: 40955

Re: LINK: User Documentation of Advant OCS with Master softw

A331 training course (Advant Controller 400 Series with S800 I/O and MasterPiece 200/1. Configuration and Operation)
delivered, in PDF format: http://www.4shared.com/zip/c4A3qd8J/A33 ... S800_.html

(thnx)
by Linkinx64
Fri Jan 13, 2012 4:37 pm
Forum: Utilites for Simatic PLC
Topic: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Replies: 311
Views: 660508

unPassword procedure for Microwin project/pou/etc.

hello guys,who can tell me how to open a protected subroutine microwin? Thank you. dears , i have a project of s7 200 with some password protected POUs in it. Pl give a solution to see inside the password protected POUs/ if anyone could tell me the password so that i can open & see it. regards to a...