PLCforum.uz.ua

That is one of the failures of Siemens!

You can not do a s7-connection with an TS adapter or PC adapter with Simatic Net.

I suggest to you: Kepserver with the PC adapter.

Best regards.

Hello,

Tips:

1. Read the awl list ( temporizadores y contadores, LIFO, FIFO)
2. Remember how to use taglogin "in winCC"
3. Remember how to use NetPro
4. Remember S5 to S7 migration (basic steps)

hope be help full.

Best Regards.

Hello, The same happend to me! and the first thing i did was try to create a new project (only to be sure of a good instalationof wincc 5.0), then I realized and instalation problem and re-instlled Wincc5.0. Good luck! Try: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.cssr&siteid...

Hello,

you can download all the DTAM Software from:

www.rockwellautomation.com/knowledgebase

I worked with this sw and a DTAM ...You need the "Connection Cable",

I tried with an RS232/422/485 Cnverter and it did not work.

I recomend you to change the DTAM , i really don't like it.

Best regards

Thank you very much

Hello,

I had the same problem and i followed this steps:

https://support.automation.siemens.com/ ... aller=view


I changed the IP adress and checked the sub mask.

Hope it help you.

Hello,

Allen Bradley have the "asset centre".
Does SIEMENS have some software like the asset centre of AB?

Thanks,

PD.
thanks for the forum, and have good new year.

I suppose you have GD communication between 5 plc.
You can just put the CP343-1 to one PLC, and send all Data to a DB, and that will be the DB you'll got to Ethernet,

Hope be usefull

hello, one way you could get the data from the database is using the connectivity pack(here you use a dts to export data..for example). If you want you maybe should use de DataMonitor, it is usefull too and reports via web. other way is using odbc. other way is openning the table of SQL, here is a t...

Hello, If you have good comunication with the PLC, and you see the online program when the out q0.0 is "1" but you do not see the led, then may be you have not made a good wire conection, please check the conections.

eduardspro wrote:CP 243-1 AS CONVERT IT IN AN APPLICATION FOR FREE PORT MADE IN WINDOWS (VB, C #, C)

You can use Freeport only for PPI ports.
Take care with the HMI connection using the cp243 1.

Hello,

here is one link for PCS7 document.

Link_is_Dead :(/145884511/D ... 7.pdf.html

hope it be usefull,

hello balarezoj,

You can split the files and upload it to rapidshare.

Thank you very much for your help.

Hello,,,,

Please help us...... could some one tell as where to download the Simatic it V6.3???

Pleaseee.....

Thank you

Hello, does somebody knows whre to download the Simatic it v6.3?

Please, its really important.

Thanks