PLCforum.uz.ua

monty_burns_007

Goog job, ascii_192! Thank you! Crack is sucessful! But when I try to run a project I have got DEMO MODE. Did you try to run a project? Do you have any advices? And let's try to crack version 2016 and newer... Hi Did you manage to hack the 2016 version? I have a similar situation. I will be gratefu...

monty_burns_007

Thank you for DeltaV v14. It works great with my old DeltaV 9.3 simulate dongle. I was wondering if you have access to AMS Device manager version 14? If so could you post a download to it? I have a license from version 12.5 and would like to upgrade. can a old license dongle be used with a newer De...

monty_burns_007

I think it is fake.
You have to contact the author through Some obscure chat program for a presumed unlock code probably after paying some money to an untrackable account.
In the end it Will not work and your are ripped off.
In worst case it also cntains a virus or spyware.

monty_burns_007

also interested in the 2.5.1 medizine version.
Looking particulary for an ethernetIP scanner key which does not seem to be included in the 2.4 medizine.
thx
monty

monty_burns_007

I'll try it out in a VM, if it's fake and contains a virus

the cure install procedure does not predict thrustworth cure, but hey maybe it works.
maybe someone can cure the generic Codesys runtime ? (Raspberry Pi, ...)

monty_burns_007

any update on this topic ? 4diac looks nice, but was very confusing and difficult to understand even how to make a simple TON timer logic. It's all related to EventTrigger based block processing. You have to trigger for ex. each block each x ms to simulate some sort of PLC scan cycle. logic gates ar...

monty_burns_007

SP11 is out: https://www.se.com/ie/en/download/docum ... V6.2-SP11/

monty_burns_007

any solution (DFB block) for sending SMS with a M340 without special NOR card, but with integrated M340 serial port ?
I only found following on Schneiders's site : https://www.se.com/it/it/faqs/FA338682/

it's in Italian
also still a lot of code outside the DFB block.

monty_burns_007

password: Just4testing!!!

edit: thx HooK , working fine

monty_burns_007

Hi,

Used above in the past succesfully... also changing the iFix version with certain byte number.
I was wondering if somebody also knows the byte where the Cimplicity version is located ?

thanks in advance

monty

monty_burns_007

don't know about the current version of medize available at: http://eplan-eb2.ys168.com/

http://ys-g.ys168.com/265063055/jsgOVHq ... 0Crack.rar

But the older medizine (no exe, just a version.dll works perfectly without virus)

monty_burns_007

new download link for latest v6.x version :

https://my.kepware.com/download/demo/ex ... 1513801164

monty_burns_007

mirror medizine:
userscloud The file you are trying to download is no longer available

monty_burns_007

mine is under:

C:\Program Files (x86)\Kepware\KEPServerEX 6\

monty_burns_007

indeed now it is working, just tested modbus tcp again. Running from 10:45 until 12:49. Maybe reboot was needed after installing version.dll. btw. version.dll is constantly locked, so if you want to delete this again, need to kill ALL kepware services and program. thanks for a finally working v6.x m...

monty_burns_007

Also time limited to 2 hours when connected with modbus tcp. Where does this version.dll have to be put ? I put it under kepware program folder. Time tiam message on startup was gone, but after 2 hours program stopped. So crack not working.

monty_burns_007

Has anyone seen a download f(full or demo) or the new Prometheus platform from Schneider / Wonderware ?

It's a new multiplatform which even includes a runtime for Raspberry Pi.

Video: https://www.youtube.com/watch?v=Ao7flziBkKs

monty_burns_007

anyone ?
will give it ago myself to produce a medize for the free version...

monty_burns_007

i think it has something to do with flex license file adaptations
maybe the one who knows can share his knowledge

monty_burns_007

anyone for Ios ?

monty_burns_007

yes how could you convert a demo to a full license in the past ?

monty_burns_007

anyone have this ?

monty_burns_007

anyone with a demo or curred version ?

monty_burns_007

check out protuner32

get it here: http://www.mediafire.com/?wzw42cbb95d3wcp

monty

monty_burns_007

anyone with version ?

monty_burns_007

any progress on finding a medizine ?
LOL, restarting each 118 min ... how does that work out for your control outputs.....

monty_burns_007

I could use a license for Centum VP v.4 that I downloaded from : http://fake/viewtopic.php?p=19794#19794

or a working v.5 version

monty_burns_007

I found temporary student/educational license for 2014 R2 here : http://www.fhict.nl/docent/downloads/P7_softwares/Intouch2014/Licenties%20Intouch/LICENTIES.rar Always interested in a permanent devellopment license Also have a integrator license, but the lic file is then combined with the check of a...

monty_burns_007

anyone have a medizine for SFCEdit ?

monty_burns_007

Wago I/O check v1.0 :

Wago I/O check v.3.2 :

monty

monty_burns_007

archiveagain wrote:I have full keygen for DeltaV any version, contact: archive.again@gmail.com

haha there is no keygen for DeltaV

It's protected with a dongle/hardware key.

monty_burns_007

I can trade my V5 dongle image for Siemens kepware for another V5 dongle/license. My v5 only works for an older V5.xxx since licenses are for specific date support Edit: dongle image is working fully (multikey) on my Win7 x64: http://s2.postimg.org/a9rk13wqh/Snap574.png stupid photo sharing It only ...

monty_burns_007

Me too, if anyone want to trade with other dcs soft
PM me

I've got Foxboro, Yokogawa CS, deltaV, PCS7.
I am looking for Centum VP or Honeywell experion

monty_burns_007

I don't have any Scimsci software...

monty_burns_007

indeed, medizine only for testing, real plants must use a paid solution i agree
luckily iFix runs in demo modus in devellopment for 2 hours
only a couple a feature don't work like network,..

monty_burns_007

mikef wrote:Use any HASP emulator.
Or rewrite real HASP dongle.
If you have real dongle key - you can make your self code for HASP. This protection very easy for cracking. It is work for one day.

I know it is easy but i don't have a hardware key. Latest license is software key i saw

monty_burns_007

DCS market is a whole different market than PLC. Long term investments are made and with a system like Foxboro you can integrate the oldest component (ex. IO card) with the latest software/controller/... I agree it looks ugly in comparison with state of the art modern GUI PLC interface/programming s...

monty_burns_007

read PM

monty_burns_007

anyone ?

I already found the XML exporter tool. But this looks not a portable small utility.
It's has to be setup with a suitevoyager webserver etc....

Are't there tools available to convert/dump Intouch .win files to other formats ? (XML / ASCII / ...)

monty_burns_007

can you upload this utility somewhere ?
I'd like to dump intouch .win displays to something readable (XML /ASCII)

monty_burns_007

looks an interesting library....
anyone with download link ?

monty_burns_007

dumper: http://www.dongleservice.com/download/dumper_cplus.zip

For Fix7.0 I used to have a dongle emulator (green dongle LPT type).
This by making custom sentinel.sys driver.

Another dumper and emulator can be found here: http://forum.exetools.com/showthread.php?t=10992

monty_burns_007

any dump yet for 7.4 ?

monty_burns_007

indeed any 5.8 multikey dump available ?

monty_burns_007

can anyone share the program installation files please ?

monty_burns_007

where's the time the intouch license was only the lic file.

Nowdays you need a develloper/integrator lic file in combination with a SuperPro Sentinel dongle....

monty_burns_007

ISO file appears to be incomplete ?

If you rename the .sync file to .iso, you can open/extract iso file.
But 35mb ISO contains for 1,3 GB data ??

I think the .sync file is incomplete.

Please upload full iso file if possible. Thanks.
Don't know if license is also included ?

monty_burns_007

anyone with medicines for actual versions ?

monty_burns_007

anyone with a license medizine or dongle dump ?
thx

monty_burns_007

here you go: Link_is_Dead :(/5D05692D786 ... 0DF89ADBDA

monty

Search found 127 matches