Search found 54 matches
- Mon Sep 02, 2013 1:16 pm
- Forum: Other PLC
- Topic: [LINK]: License for GE Fanuc VersaPro V2.04
- Replies: 16
- Views: 38749
Re: [LINK]: License for GE Fanuc VersaPro V2.04
Hi ! I found VersaPro v2.02 with crack by eMule. In packets v2.02 and v2.04 (links above) cracks are the same. So by analizing source and cracked file VersaPro v2.02, I made crack for v2.04. I try it, all work fine, issues described above not founded. If anybody need it, take it: VersaPro v2.04 with...
- Wed Aug 28, 2013 6:53 pm
- Forum: Other PLC
- Topic: [LINK]: License for GE Fanuc VersaPro V2.04
- Replies: 16
- Views: 38749
Re: [LINK]: License for GE Fanuc VersaPro V2.04
One more mirror: VersaPro v2.04 standard (2003 - 2004), 53 MB: http://www.4shared.com/get/ahbpmJjC/versapro_204_standard.html VersaPro v2.04 with crack (2003 - 2005), 70 MB, copy posted above: http://www.4shared.com/get/T0EeoP_n/VERSAPRO_V2_04_with_crack.html There is some problem with cracked Versa...
- Sun Aug 11, 2013 10:25 am
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
MultidoS
Если не секрет, чем считывали EEPROM и вскрывали пароль?, а также - выпаивали микруху с платы или подключались к ней прямо на плате контроллера?
Если не секрет, чем считывали EEPROM и вскрывали пароль?, а также - выпаивали микруху с платы или подключались к ней прямо на плате контроллера?
- Wed Jul 24, 2013 9:39 pm
- Forum: SIMATIC system
- Topic: Description of parameters and interface of Datablock
- Replies: 1
- Views: 2445
Description of parameters and interface of Datablock
Hi ! I have some problem: by opening some DBs I get message 30:504 : "There are no parameter and local variable names available because there is a time-stamp conflict between block interface of the blocks and the description of parameters and variable name." After opening this DBs variables have nam...
- Tue Jun 04, 2013 10:05 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
Наконец добрался до контроллера, но вскрыть пароль все же не удалось. :( Скриншоты программы 2013: [dead] - исходный вид окна при старте (с подписью назначения кнопок), [dead] - после обнаружения контроллера, [dead]- после определения типа контроллера, [dead] - после попытки определения пароля. Посл...
- Tue May 21, 2013 12:21 am
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
zerkmax , СПАСИБО за подсказку! Действительно, включил в разделе "Язык для программ не поддерживающих Юникод" язык "Китайский(КНР)", перегрузился и прога заработала! Однако, чтобы этот Китайский язык появился в списке доступных языков, надо на вкладке Языки поставить галочку "Установить поддержку я...
- Tue Apr 30, 2013 5:53 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
Icerazor Таже беда. Перепробовал все три указанные версии 2010, 2012, 2013. 2010 - запускается нормально, но думаю, что пароль для 02.01 не вскроет, так как по дате (14.02.2011) она более древняя, чем в Crack_s7-200CN-UNLOCK_RAR_OK (21.07.2011). К сожалению в данный момент контроллера 02.01 под рук...
- Fri Apr 26, 2013 7:08 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
Сегодня попробовал с помощью Crack_s7-200CN-UNLOCK_RAR_OK вскрыть пароль для скачивания у S7-200 CPU 224 v02.01 - увы, неуспешно. Прога пароль не выдает и, судя повсему, говорит, что работает только с версией 02.00. (no) Может кто знает аналогичную прогу для более новых прошивок CPU? (sbutton) Today...
- Wed Apr 24, 2013 9:12 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
- Replies: 88
- Views: 189205
Re: [?]: How to unlock password s7 200 connecting PC/PPI cab
Всем привет. Была проблема - не мог скачать бекап программы из CPU 224 v02.00, контроллер требовал пароль для скачивания. Если вкратце, то пароль удалось получить с помощью китайской проги Crack_s7-200CN-UNLOCK_RAR_OK , которой поделился phanvantuan6 (см.выше), за что ему огромное СПАСИБИЩЕ! (clap) ...
- Tue Jul 10, 2012 10:10 pm
- Forum: SIMATIC system
- Topic: [?]: Initialization DB by default values
- Replies: 3
- Views: 5397
Re: [?]: Initialization DB by default values
Thanks Guille! "Why do I need that?" There are couple of reason to do that, fo example: 1) at cold restart to restore settings to eleminates the changes maded at last work period (start mashine always in one start condition, independent from previouse workman manipulation results) 2) to have the abi...
- Thu Jun 21, 2012 12:34 pm
- Forum: SIMATIC system
- Topic: [?]: Initialization DB by default values
- Replies: 3
- Views: 5397
[?]: Initialization DB by default values
Hi! Is it possible to reinitialize data of DB by its default values in programm - is there such FC / FB / SFC / SFB? Or there is only one way - to make another DB with actual values identical default values and at the needed moment to copy them to needed DB? Thanks before, best regards. In Russian: ...
- Wed Jul 06, 2011 8:24 pm
- Forum: Simatic (Russian)
- Topic: CPU 313 - не отзывается, мигают все светодиоды
- Replies: 2
- Views: 4094
Re: CPU 313 - не отзывается, мигают все светодиоды
Спасибо. Заметку нашел:
http://iadt.siemens.ru/forum/viewtopic. ... 8%EE%E4%FB
Посмотрим на резисторы, питание, а дальше, видимо, в ремонт к Сименсу.
http://iadt.siemens.ru/forum/viewtopic. ... 8%EE%E4%FB
Посмотрим на резисторы, питание, а дальше, видимо, в ремонт к Сименсу.
- Tue Jul 05, 2011 7:53 pm
- Forum: Simatic (Russian)
- Topic: CPU 313 - не отзывается, мигают все светодиоды
- Replies: 2
- Views: 4094
CPU 313 - не отзывается, мигают все светодиоды
Контроллер CPU 313 перестал работать. Симптомы: 1) нет связи по MPI с PG (Notebook с USB-MPI адаптером) 2) после включения питания кратковременно загораются светодиоды DC5V и STOP, после чего начинают синхронно мигать с частотой 2 раза в секунду все светодиоды (SF, DC5V, FRCE, RUN и STOP) 3) на мани...
- Tue Aug 24, 2010 9:06 am
- Forum: Other HMI
- Topic: [?]: How to change expired date of Ifix 4.5 License
- Replies: 3
- Views: 3479
- Sun Aug 22, 2010 6:27 pm
- Forum: PLC's books
- Topic: [BOOKS] iFIX - Trainng Courses / Учебные курсы по iFIX
- Replies: 1
- Views: 5843
- Mon Aug 16, 2010 5:27 pm
- Forum: Other HMI
- Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
- Replies: 6
- Views: 5373
Re: [?]: store historical value AI tag from iFIX 3.5 to SQL
Большое спаибо!!!
- Thu Aug 12, 2010 7:14 pm
- Forum: Other HMI
- Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
- Replies: 6
- Views: 5373
Re: [?]: store historical value AI tag from iFIX 3.5 to SQL
Большое спасибо, только обе ссылки - одинаковые, судя по содержанию скачанного - это первая ссылка.
Попробуем разобраться.
Попробуем разобраться.
- Thu Aug 12, 2010 11:00 am
- Forum: Other PLC
- Topic: [?]: Unity Pro - How to Compare Logic of two applications
- Replies: 8
- Views: 8958
Re: [?]: Unity Pro - How to Compare Logic of two application
Unity Dif realy work, but show differences of initial values variables in structures without name of certain variable (only name of strucktures). Differenses in ST language show correct. Registration makes like here - for Unity Pro - by changing BrickLicenceManager.dll and next registration with any...
- Thu Aug 12, 2010 9:04 am
- Forum: Other PLC
- Topic: [?]: Unity Pro - How to Compare Logic of two applications
- Replies: 8
- Views: 8958
Re: [?]: Unity Pro - How to Compare Logic of two application
If you woud like to detailed compare of two projects (application), so it is not possible. (no) Unity Pro have the tools to only check identical Name, Version and Date of compilation ("Compare") of Project / Application between PC and PLC (Menu->PLC->Compare...) or between PLC Memory and Card (Menu-...
- Thu Aug 12, 2010 6:39 am
- Forum: Other HMI
- Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
- Replies: 6
- Views: 5373
Re: [?]: store historical value AI tag from iFIX 3.5 to SQL
Надо сохранять в Microsoft SQL Express, чтобы потом можно было обрабатывать эти данные другой, специализированной, программой - строить графики, таблицы, создавать отчеты в нужной форме, что сделать средствами iFIX затруднительно. Саму базу данных в SQL сервере можно, конечно, создать и в ручную (та...
- Thu Aug 12, 2010 2:27 am
- Forum: Other HMI
- Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
- Replies: 6
- Views: 5373
[?]: store historical value AI tag from iFIX 3.5 to SQL
If anybody now, please explain how to setup iFIX (v3.5) to keep of historical value AI tag (save it) in SQL server? Or give me link to docs, please! (sos) Thanks before and best regards! In Russian: Если кто-нибудь знает, пожалуйста расскажите - как настроить iFIX так, чтобы она писала исторические ...
- Thu Jul 15, 2010 8:12 pm
- Forum: Other PLC
- Topic: [?]: Unity - How detect project version?
- Replies: 0
- Views: 1429
[?]: Unity - How detect project version?
Hello! There is the task: show on the operator panel screen current version and compilation date of controller project (programm). How to find this information by programm operators? System word described in help do not included it (there are only firmware information). May be someone new how to do ...
- Thu Jul 15, 2010 7:55 pm
- Forum: Other PLC
- Topic: [?]: Sample Program of Unity Pro
- Replies: 6
- Views: 5084
Re: [?]: Sample Program of Unity Pro
Reposted sample programm is here.
- Tue Apr 27, 2010 7:15 pm
- Forum: Other PLC
- Topic: How to reset %MW by it initial values in Unity Pro?
- Replies: 0
- Views: 1386
How to reset %MW by it initial values in Unity Pro?
Is it possible to reset %MW by it initial values from Unity Pro in online mode or by using some FB or system bits in programm ?
- Sun Apr 25, 2010 6:21 pm
- Forum: Other HMI
- Topic: [?]: Vijeo Designer Lite - Problems with cyrillic symbols
- Replies: 0
- Views: 2493
[?]: Vijeo Designer Lite - Problems with cyrillic symbols
Hello everybody! I work with Vijeo Designer Lite v1.3. To use russian messages on XBT N400 screens I set project option Language with Cyrillic font. In this case on Vijeo design panels screens instead russian symbols writes "@", but on simulator screens and on real XBT panel screens all symbols show...
- Sun Dec 27, 2009 10:52 pm
- Forum: SIMATIC HMI
- Topic: [?]: TD200 Firmware update
- Replies: 1
- Views: 3692
[?]: TD200 Firmware update
Hello everybody! Happy New Year! :D Is it possible to change firmware (OS v2.1 to v3.0 or reverse) in TD200? If any body know how it can be doing, please explane it and share by firmware and tools. Good luck in new year :!: in Russian: Всем привет! Счастливого рождества и с Новым годом! :D Возможно ...
- Thu Dec 03, 2009 10:23 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
Re: [?]: Troubles with OP5
I'm here agan! 1. Alarm buffer was successfully cleared! Project was not deleted! :D Only language was changed on deafault (Italiano), but this setting is easy changed (Menu->Special Func.->Diverse->Language) Great thanks for your advice! 2. Upload project, suddenly, was not made. In OP5 I set: Menu...
- Wed Dec 02, 2009 6:09 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
Re: [?]: Troubles with OP5
Greatly Thanks! :P On my home PC there is several OS installed, managed by SYSCOM. With Windows based system COMTEXT did not run at any way, but in clear MSDOS 6.22 it realy work! :mrgreen: To MSDOS run, I have FAT32 on drive "C", so COMTEXT work fine from directory on hard drive "C". Now there I fo...
- Tue Dec 01, 2009 5:43 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
Re: [?]: Troubles with OP5
Hi! Today I suddenly find that tested OP5 was get back to customer. So I still not tried to clear alarm buffer, but I hope to try it in nearly future. When I had test connection the OP5 with COMTEXT, I was already susessfully set transfer mode in OP5. Converter V24/TTY <--> RS232 I made myself, so I...
- Mon Nov 30, 2009 4:15 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
Re: [?]: Troubles with OP5
Thanks for reply! Tomorrow I'll try to clear buffer by your metod. I have COMTEXT downloaded by link from this forum, have the cable that is OK by result of internal test of RS232 OP5, but can't find the way to upload project or compiled program from OP5 to PC. When I start COMTEXT it says that it d...
- Sun Nov 29, 2009 11:22 am
- Forum: Other PLC
- Topic: [?]: Sample Program of Unity Pro
- Replies: 6
- Views: 5084
Re: [?]: Sample Program of Unity Pro
In previous post was sample with loop blocks placed in different nets.
Here is project with two sample of LD loop placed in single net. I think that you mean this way.
Good luck!
Here is project with two sample of LD loop placed in single net. I think that you mean this way.
Good luck!
- Sun Nov 29, 2009 1:06 am
- Forum: Other PLC
- Topic: [?]: Sample Program of Unity Pro
- Replies: 6
- Views: 5084
Re: [?]: Sample Program of Unity Pro
Hi!
Your task is much easyer to make in ST language, but it possible in Ladder too (with Jump label).
Test project you may find here
If you try somthing else, post here url to your sample. I'll look at them.
Good luck!
Your task is much easyer to make in ST language, but it possible in Ladder too (with Jump label).
Test project you may find here
If you try somthing else, post here url to your sample. I'll look at them.
Good luck!
- Mon Nov 23, 2009 5:58 pm
- Forum: Other PLC
- Topic: [?]: Sample Program of Unity Pro
- Replies: 6
- Views: 5084
Re: [?]: Sample Program of Unity Pro
Hi!
Waths loop do you mean?
- in SFC section with STEP connection;
- in LD or FBD section with block connection;
- in ST section - cycle (FOR, REPEAT, WHILE).
What exactly?
Waths loop do you mean?
- in SFC section with STEP connection;
- in LD or FBD section with block connection;
- in ST section - cycle (FOR, REPEAT, WHILE).
What exactly?
- Mon Nov 16, 2009 12:00 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
Re: [?]: Troubles with OP5
Thanks for attention!
Without battery will be project deleted?
I don't have COMTEXT and backup copy OP5 project file. So I don't like that project in OP5 will be deleted!
Without battery will be project deleted?
I don't have COMTEXT and backup copy OP5 project file. So I don't like that project in OP5 will be deleted!
- Tue Sep 15, 2009 4:02 pm
- Forum: SIMATIC HMI
- Topic: [?]: Troubles with OP5
- Replies: 10
- Views: 7707
[?]: Troubles with OP5
Hello! I have OP5 without COMTEXT source project, but in OP5 there is list of 32 possible alarm messages and 0 (no one) event messages. Main troubles is: 1) Once upon at time OP5 was shown 7 alarms, save them in buffer (don't know how) and after it I can't clear them! Standard metod "Menu->Alarms->D...
- Tue Aug 25, 2009 7:10 pm
- Forum: Other HMI
- Topic: [LINK]: ifix 4.5 key for russian and other language versions
- Replies: 2
- Views: 5693
[LINK]: ifix 4.5 key for russian and other language versions
Hello everybody! At last founded the way to use soft license for non english versions iFIX! Here is key for v4.5 and instruction. Enjoy! 8) Всем привет! Наконец найден способ использования программной лицензии (без электронного ключа) для не англоязычных (русских и др.) версий iFIX! Здесь ключик и и...
- Mon Jul 27, 2009 4:17 pm
- Forum: Simatic HMI (Russian)
- Topic: [?]: How to connect iClient to iFix
- Replies: 3
- Views: 4223
У меня заработало! Без лицензии - никак! :evil: Но как только поставить на оба узла (SCADA и iClient) даже не HW (ключ), а soft лицензию (типа license.sys) с соответствующими опциями сетевой работы, тогда узлы начинают друг друга видеть! :D К сожалению, для русского iFIX soft лицензий я пока не виде...
- Mon Jul 27, 2009 3:41 pm
- Forum: Other HMI
- Topic: [?]: iFIX DEMO - SCADA and iClient nodes connection?
- Replies: 2
- Views: 2765
- Thu Jul 16, 2009 4:01 pm
- Forum: Simatic HMI (Russian)
- Topic: [?]: How to connect iClient to iFix
- Replies: 3
- Views: 4223
Сейчас сам занимаюсь этим же вопросом. Теоретически так: 1. На компе узла iClient в файле: ..:\WINDOWS\system32\drivers\etc\hosts прописать IP адрес и имя каждого подключаемого узла сервера. Например, если подключаемый узел сервера имеет логическое имя IFIX_SRV, а установлен он на компе с IP адресом...
- Wed Jul 15, 2009 2:29 pm
- Forum: Other HMI
- Topic: [?]: iFIX DEMO - SCADA and iClient nodes connection?
- Replies: 2
- Views: 2765
[?]: iFIX DEMO - SCADA and iClient nodes connection?
Is it possible to establish connection between iFIX SCADA node and iFIX iClient node in DEMO mode iFIX? If it possible, please give me detailed description what settings must be made. In russian: Возможно ли связать в демо режиме iFIX два узла - SCADA (сервер) и iClient? Если возможно, пожалуйста, у...
- Wed Mar 18, 2009 5:04 pm
- Forum: Other HMI
- Topic: [?]: ifix 5.0 KEY
- Replies: 10
- Views: 19619
How to change date There are 3 bytes in license.sys by offsets 0x76...0x78 that define expired date. But with changing them also changed a few else settings (like max I/O points, Historian points and connections and some others). So, there must be changed several bytes accordingly to eleminate unne...
- Tue Mar 03, 2009 4:20 pm
- Forum: Other HMI
- Topic: [?]: ifix 5.0 KEY
- Replies: 10
- Views: 19619
???????????????????? Only 2015-12-31 Do you need other data? What exactly? To change data is not big problem... :wink: I was try to make for 4.5 russian, but not succeed. :cry: Can try to do for 4.5 english, but can't test it (don't wish to uninstall/install different versions). If anybody need - w...
- Sun Feb 15, 2009 5:11 pm
- Forum: Other HMI
- Topic: [?]: ifix 5.0 KEY
- Replies: 10
- Views: 19619
- Tue Jan 20, 2009 6:08 pm
- Forum: Other PLC
- Topic: Request: pnozmulti program for Pilz PLC
- Replies: 1
- Views: 2394
Look here http://plc.net.ru/viewtopic.php?p=22028 !
- Tue Dec 23, 2008 8:19 am
- Forum: SIMATIC system
- Topic: [?] Error in FB Interface Table Declaration
- Replies: 4
- Views: 3628
Great Thank's! It was very helpfully! I was alredy jaded to delete and restore this parameters. I found some interesting things: 1. "Editor Menu - File -> Check and Update Accesses" - lead to disapear this problem in current session editing FB20. 2. After opening and saving FB26 and FB29 (no errors ...
- Mon Dec 22, 2008 5:19 pm
- Forum: SIMATIC system
- Topic: [?] Error in FB Interface Table Declaration
- Replies: 4
- Views: 3628
I try open FB20 with PG2000 v4.89. I never use it before, so I beg you pardon for my dummyes. With opening FB20 PG2000 says: - 9 time: In the parameter-definition of this block is an unknown data type. Would you really want to open it? - and one last time: unknown code in STL After it PG2000 open FB...
- Mon Dec 22, 2008 11:02 am
- Forum: SIMATIC system
- Topic: [?] Error in FB Interface Table Declaration
- Replies: 4
- Views: 3628
[?] Error in FB Interface Table Declaration
Hello! I have next problem with Step7: There is work program uploaded from CPU (315-DP2). Program include FB20, FB26, FB29 and other. FB20 have STAT block with declaration parameters: #STAT115 type FB26 Address 152.0 #STAT149 type FB26 Address 160.0 #STAT183 type FB29 Address 168.0 #STAT200 type FB2...
- Fri Nov 21, 2008 9:01 pm
- Forum: Other PLC
- Topic: [LINK]: Pilz PNOZmulti Configurator SN or crack
- Replies: 11
- Views: 19797
v4.0.2 с ключиком
Here is Pilz PNOZmulti Configurator v4.0.2 with key. And here lie separetely key for v4.0.2. Suddenly, but with other versions its not work. Last versions PNOZmulti Configurator with Demo key you can download, registered before, from there: www.pilz.com In russian: Здесь есть Pilz PNOZmulti Configu...
- Tue Nov 18, 2008 9:07 am
- Forum: PLC's books
- Topic: [BOOK]: Hans Berger. Automating With Simatic
- Replies: 12
- Views: 66034
Here is couple books of Hans Berger in russian with examples: Automating with STEP 7 in LAD and FBD Automating with STEP 7 in STL and SCL or http://www.automation-drives.ru/as/support/documentation/ http://www.automation-drives.ru/as/products/doc.php?l1=Программное%20обеспечение&l2=Базовое%20ПО&l3=d...
- Mon Nov 17, 2008 5:44 pm
- Forum: SIMATIC system
- Topic: Request: S7 DB-Initializer by Runmode
- Replies: 6
- Views: 9050