Search found 30 matches

by nnaf
Thu May 14, 2020 12:20 pm
Forum: Other HMI
Topic: Пытаюсь победить VTWIN
Replies: 3
Views: 1732

Re: Пытаюсь победить VTWIN

Спасибо, это все я видел. Но я не знаю что будет если прошить панель старым boot -ом. В статье boot новый, а у меня старый.
by nnaf
Thu May 14, 2020 10:15 am
Forum: Other HMI
Topic: Пытаюсь победить VTWIN
Replies: 3
Views: 1732

Пытаюсь победить VTWIN

Добрый день. На станке, который был изготовлен несколько лет назад в Украине установлена HMI VT515W00000 Data: 10/01/13 S/N 13-002-01761 REV: 1.0, HMI работала совместно с PLC VIPA 114. В PLC сел аккумулятор и стерлась программа. Производителя станка и программу не найти, программу нужно писать нову...
by nnaf
Wed May 28, 2014 10:01 am
Forum: Other PLC
Topic: Schleicher PLC.....from 90´s
Replies: 15
Views: 13708

Re: Schleicher PLC.....from 90´s

Hi, everybody.
The software, controler photo, working example of the program for the controler on a photo. I think it to you will help.
http://gfile.ru/a7x2a
http://gfile.ru/a7Xjc

Password: plcforum
by nnaf
Wed May 28, 2014 6:34 am
Forum: Other PLC
Topic: Fuji Flex-PC ?
Replies: 0
Views: 1486

Fuji Flex-PC ?

Hi all.
Kindly let me know if any of you can share a copy of the Fuji Flex-PC programmer software for PLC NJ-CPU-B16 .
Thanks in advance. (oo)
by nnaf
Mon Sep 27, 2010 10:54 am
Forum: Other HMI
Topic: [?+]: Problem HMI Panasonic GT32
Replies: 1
Views: 3080

Re: Problem HMI Panasonic GT32

The problem is solved. HMI the answer from Slave is required. In this case from PLC.
Проблема решена. HMI требуется ответ от Slave. В данном случае от PLC.
by nnaf
Mon Sep 27, 2010 5:15 am
Forum: Other HMI
Topic: [?+]: Problem HMI Panasonic GT32
Replies: 1
Views: 3080

[?+]: Problem HMI Panasonic GT32

Good day. At me a question on the panel of operator Panasonic GT32 Model: AIG32MQ02D-F. This panel GT32 (in mode Master) costs on machine tool LZS-600. System Menu System Version 1.15 PLC Driver Modbus (RTU mode) Version 1.00 And PLC Emerson EC10A (in mode Slave). Programs in PLC and HMI are closed ...
by nnaf
Sun Oct 25, 2009 8:54 am
Forum: Other PLC
Topic: Request: logic master LM5 (a old version 80's)
Replies: 3
Views: 2993

Re: Request: logic master LM5 (a old version 80's)

Hi all. I worked with this program many years back on the old computer.
It full operating program under a DOS.

Link_is_Dead :(/297636245/LM5.rar
Size: 367 KB

I search LM1 and LM6
by nnaf
Sat Oct 03, 2009 5:24 pm
Forum: Other HMI
Topic: [LINK]: SCADA Trace Mode 6
Replies: 22
Views: 38688

by nnaf
Fri Jan 23, 2009 2:35 pm
Forum: Other HMI
Topic: Request: WindO/I-NV2 for IDEC
Replies: 13
Views: 14334

Hi all. I try upload from the panel the project. After 21 % of uploading the panel asks to enter the password. Thus in window Username the name "user" is already entered. Who worked with these panels prompt. User this standard invitation to enter a name and the password or such name already exists a...
by nnaf
Wed Dec 31, 2008 2:39 pm
Forum: Other HMI
Topic: Request: WindO/I-NV2 for IDEC
Replies: 13
Views: 14334

by nnaf
Sun Dec 28, 2008 10:11 am
Forum: Other HMI
Topic: Request: WindO/I-NV2 for IDEC
Replies: 13
Views: 14334

Thank. I shall be glad if you upload the old version.
by nnaf
Sat Dec 20, 2008 4:50 pm
Forum: Other HMI
Topic: Request: WindO/I-NV2 for IDEC
Replies: 13
Views: 14334

by nnaf
Thu Nov 27, 2008 11:29 am
Forum: Other PLC
Topic: [?] CPU Seydelmann
Replies: 3
Views: 3104

Hi all. I will add a controller photo. There can be it will help to identify it.
Link_is_Dead :(/167879743/CPU_MODUL_16A.rar
Link_is_Dead :(/167879879/MICRO_113.rar
by nnaf
Fri Nov 21, 2008 4:53 pm
Forum: Drivers and Inverters
Topic: [Schemes]: Unidrive Commander SE from Control Techniques
Replies: 15
Views: 47968

Greetings to all. It is exactly in one year I spread one more not the full circuit. I hope that this year people will be not such greedy. Unidrive Classic.
http://slil.ru/26356585
or
Link_is_Dead :(/166017533/U ... 02_CCT.pdf
343 kb
by nnaf
Fri Nov 14, 2008 7:15 pm
Forum: Other PLC
Topic: [?] CPU Seydelmann
Replies: 3
Views: 3104

At us meat cutter mixer on 500 litres. Controllers in them CPU-MODUL 16A. I shall be very glad to your information. Management should be similar. It will be easier to me to understand.
by nnaf
Mon Nov 10, 2008 4:14 pm
Forum: Other PLC
Topic: [?] CPU Seydelmann
Replies: 3
Views: 3104

[?] CPU Seydelmann

Hi all . Who knows, that it for controller CPU-MODUL 16A (German firm Seydelmann). With this controller digital panel Micro 113 is used. By what program CPU-MODUL 16A it is programmed and where it is possible to find any information on this equipment.
by nnaf
Mon Jun 23, 2008 2:32 pm
Forum: Other HMI
Topic: Request: WindO/I-NV2 for IDEC
Replies: 13
Views: 14334

Request: WindO/I-NV2 for IDEC

hi friends..
I'm looking for an Idec software or key called WindO/I-NV2 to program an Idec HG2F-SS22VCF 5.7" Color Touchscreen. Someone could help me?

Link for downloads demo version:
http://compart.zajdel.pl/ca/upload/_ftp/
by nnaf
Sun Mar 09, 2008 9:03 pm
Forum: Other PLC
Topic: [?]: FUJI Micrex-f
Replies: 6
Views: 7117

Dear most :) ,
thank you very much :)
by nnaf
Sat Feb 16, 2008 5:03 pm
Forum: Drivers and Inverters
Topic: [Schemes]: Unidrive Commander SE from Control Techniques
Replies: 15
Views: 47968

Hi all! It is bad, that nobody has backed up this subject. Probably, on a forum all are interested only by(with) the programs. It is not interesting, more to spread the schemes I shall not be. Привет всем! Плохо, что никто не поддержал эту тему. Возможно, на форуме всех интересуют только программы. ...
by nnaf
Sat Feb 16, 2008 5:02 pm
Forum: Other PLC
Topic: [?]: FUJI Micrex-f
Replies: 6
Views: 7117

[?]: FUJI Micrex-f

Hi all! Who knows, that it for the controller FUJI MICREX-F FTF56-N both controller FUJI MICREX-F FTL 010H, and what program they are programmed. And main where her(it) to take. The looking ups in интернете of outcomes have not given. There are descriptions on standard controllers of the Fuji corpor...
by nnaf
Mon Nov 26, 2007 2:31 pm
Forum: Drivers and Inverters
Topic: [Schemes]: Unidrive Commander SE from Control Techniques
Replies: 15
Views: 47968

[Schemes]: Unidrive Commander SE from Control Techniques

Hi everybody! And why there is no theme with basic circuits of drives, think that many have interest to this information. The first coin in the common coin box. Schemes of Unidrive Commander SE from Control Techniques Принципиальные схемы частотников Unidrive Commander SE from Control Techniques Lin...
by nnaf
Wed May 23, 2007 4:03 pm
Forum: Other HMI
Topic: [?]: Crack for Scada Promotic
Replies: 1
Views: 4586

[?]: Crack for Scada Promotic

All greetings. The reference on Czech SCADA system Promotic. The project working at us, has got to us together with an industrial line. In LPT to port there is a key. A question, it is possible to force to work her{it} without a key. Variants with emulation and a copy of a key not work, a line on a ...
by nnaf
Mon May 07, 2007 6:12 pm
Forum: Other PLC
Topic: Request: GE Fanuc VersaPro
Replies: 1
Views: 4650

Request: GE Fanuc VersaPro

Request GE Fanuc VersaPro
in Russian wrote:Привет ALL!!!
Есть у кого-нибудь софт GE Fanuc VersaPro (желательно с кряком или ключями) для контроллеров GE Fanuc, можно демо.
И подходит для нее шнур от LogicMastera или нужен свой.
Большое сенкс!!!
by nnaf
Wed Apr 18, 2007 5:11 pm
Forum: Other PLC
Topic: [KEY]: Key for DirectSOFT 32
Replies: 6
Views: 16656

DirectSOFT

Привет всем. Никто не таится и не делает коммерции, но как при размерах современных версий софта для PLC и их многообразии, а также дохлом интернете, это осуществить. У меня только по Siemens-у несколько гигабайт софта, да и по другим не мало. Вот я и задал вопрос в такой форме. Вот ссылки, может б...
by nnaf
Tue Apr 17, 2007 2:59 pm
Forum: Other PLC
Topic: [KEY]: Key for DirectSOFT 32
Replies: 6
Views: 16656

Thanks for Key for DirectSoft32, for the version which one is for me he has not approached, but has approached for the version tapped with the Internet. Once again huge thanks. And than I can to you help, can чтото interests you. It is possible on E-mail. Спасибо за Key for DirectSoft32, для версии ...
by nnaf
Sun Apr 15, 2007 4:48 pm
Forum: Other PLC
Topic: [KEY]: Key for DirectSOFT 32
Replies: 6
Views: 16656

[KEY]: Key for DirectSOFT 32

I search for the license code to full version DirectSOFT 32.
I can offer similar products from Siemens, Omron, Ge Fanuc and other.
Russian wrote:Ищу лицензионный код к полной версии DirectSOFT 32. Могу предложить аналогичные продукты от Siemens, Omron, Ge Fanuc и тд.