Search found 53 matches

by centipede
Wed May 27, 2020 3:45 am
Forum: SIMATIC system
Topic: PLCSIM V14 with TIA V13
Replies: 1
Views: 913

Re: PLCSIM V14 with TIA V13

No
by centipede
Sun Aug 25, 2019 6:58 am
Forum: SIMATIC system
Topic: [?]: Cable PG631 AS501 for S5 130K / CPU921
Replies: 7
Views: 2637

Re: [?]: Cable PG631 AS501 for S5 130K / CPU921

Yes you are right. AS511 and the Serial Interfaces are different to the AS501.
The AS501 are very old und was used very seldom.

6ES5734-0BD20 is the right cable. But unfortunately i found nothing of information about it.
I have documentation about the 130A and W, but there is no pinout.

Sorry
by centipede
Fri Aug 23, 2019 11:25 am
Forum: SIMATIC system
Topic: [?]: Cable PG631 AS501 for S5 130K / CPU921
Replies: 7
Views: 2637

Re: [?]: Cable PG631 AS501 for S5 130K / CPU921

Sorry Admin, but the AS501 is a parallel Interface
Your scheme is the newer TTY Interface
by centipede
Thu Nov 05, 2015 4:29 pm
Forum: SIMATIC system
Topic: [?]: unPassword Step7 Safety Program
Replies: 5
Views: 4544

Re: [?]: unPassword Step7 Safety Program

Do you have the optional Software "Distributed Safety" installed?
by centipede
Tue Nov 03, 2015 4:24 pm
Forum: SIMATIC system
Topic: [?]: unPassword Step7 Safety Program
Replies: 5
Views: 4544

Re: [?]: unPassword Step7 Safety Program

Password is "cmlb"
by centipede
Mon Jun 08, 2015 8:02 am
Forum: SIMATIC HMI
Topic: How to backup OP270 HMI
Replies: 2
Views: 5036

Re: How to backup OP270 HMI

It isn't possible to make a backup and use these for further actions. If you want to make changes you need the Protool or WinCCflex project files. The backup is only if you change the OP with the same OP. For the backup the OP must be in Transfer Mode, the Software you need is Prosave. https://suppo...
by centipede
Sat May 23, 2015 8:53 am
Forum: SIMATIC system
Topic: WinCC Professional V12 and V13 in the same PC?
Replies: 1
Views: 2853

Re: WinCC Professional V12 and V13 in the same PC?

The only way for Professional is with Virtuell Machine.
by centipede
Thu Mar 26, 2015 2:45 pm
Forum: SIMATIC HMI
Topic: dip switch on mp277
Replies: 1
Views: 2775

Re: dip switch on mp277

Standard is all off, like the first picture.
by centipede
Mon Dec 29, 2014 4:06 pm
Forum: SIMATIC system
Topic: [?]: TIA v13 SP1 and S7-1500 firmvare 1.7
Replies: 5
Views: 7713

Re: [?]: TIA v13 SP1 and S7-1500 firmvare 1.7

Firmware is already for download and SP1 coming soon.
by centipede
Thu Aug 22, 2013 1:26 pm
Forum: SIMATIC system
Topic: S5-95U Replace
Replies: 1
Views: 1600

Re: S5-95U Replace

Yes you can use it, it's just a newer HW-Release
by centipede
Fri Mar 01, 2013 2:00 pm
Forum: SIMATIC system
Topic: Info: TIA Portal V13 SP2 Trial is ready for download
Replies: 36
Views: 227105

Re: Info: TIA Portal V12 Trial is ready for download

You can open V11 projects and its your decision to save as V11 or migrate to V12.
You can install V12 parallel to V11, so you can use bothe TIAs.
by centipede
Wed Feb 27, 2013 9:56 pm
Forum: SIMATIC system
Topic: Info: TIA Portal V13 SP2 Trial is ready for download
Replies: 36
Views: 227105

Re: Info: TIA V12 Trial is ready for download

Here the Links for WinCC V12:

http://support.automation.siemens.com/W ... e/67797298

and the Trial is the complete Software, just need a License ;-)
by centipede
Wed Jan 30, 2013 10:52 am
Forum: SIMATIC HMI
Topic: [LINK]: Siemens COM 396
Replies: 4
Views: 4481

Re: Request: Siemens COM 396

by centipede
Fri Oct 19, 2012 1:50 pm
Forum: SIMATIC system
Topic: Request: Step5 v3.2
Replies: 3
Views: 4351

Re: Request: Step5 v3.2

In Step5 only the *.s5d is realy neccesary.
by centipede
Mon Jan 30, 2012 4:04 pm
Forum: SIMATIC system
Topic: [?]: S5 135U digital O/p ENABLE Input X20 Jumper
Replies: 1
Views: 1633

Re: [?]: S5 135U digital O/p ENABLE Input X20 Jumper

On the top of the card.
by centipede
Wed Oct 05, 2011 2:51 pm
Forum: SIMATIC system
Topic: [?+]: programm Com ET200
Replies: 4
Views: 2692

Re: Request: programm Com ET200

For your IM308C and .ET2 file you need Com Profibus V3.x
by centipede
Sat May 21, 2011 9:01 pm
Forum: SIMATIC system
Topic: [?]: Testing TIA Portal v11/v12 (We all beta-testers :)
Replies: 47
Views: 159860

Re: [?]: Testing TIA Portal v11 (We all beta-testers :)

Pls check this List:
http://support.automation.siemens.com/W ... n/50029533
https://support.automation.siemens.com/ ... W_List.pdf
for example: Your CPU have the wrong Firmware, you need 6ES7 315-2AH14-0AB0 v2.6 or above.
by centipede
Sat Mar 26, 2011 8:35 pm
Forum: SIMATIC system
Topic: [INFO]: Simatic RoadMap - Step7 v5.6, TIA v15, PCS7 v9.0
Replies: 75
Views: 92736

Re: [INFO]: Simatic RoadMap - whats new in Step7 v11, PCS7..

Now I have the first infos about the S7-1500.
The release is planned for 3/2012.
Its a complete new design and it is placed between the S7-300 and S7-400.
For programming TIA V12 is nessecary.
by centipede
Wed Mar 09, 2011 8:48 pm
Forum: SIMATIC system
Topic: [INFO]: Simatic RoadMap - Step7 v5.6, TIA v15, PCS7 v9.0
Replies: 75
Views: 92736

Re: [INFO]: Simatic RoadMap - whats new in Step7 v11, PCS7..

CoMod wrote:but what is it x?
Now "2", in Future "5" ;-)
by centipede
Thu Jan 27, 2011 7:08 pm
Forum: SIMATIC system
Topic: [?]: S5 25 pin ----- 9 pin connect to pc
Replies: 6
Views: 5889

Re: [?]: S5 25 pin ----- 9 pin connect to pc

Look here:

http://helmholz.de/

Components for S5-Interface Converters
by centipede
Fri Jan 14, 2011 6:20 pm
Forum: SIMATIC system
Topic: [INFO]: Simatic RoadMap - Step7 v5.6, TIA v15, PCS7 v9.0
Replies: 75
Views: 92736

Re: [INFO]: Simatic RoadMap - whats new in Step7 v11, PCS7..

Sorry, you must wait to 06 or 07/2011. Than the updates for Win7 64Bit comes with the Service Packs.
by centipede
Mon Dec 27, 2010 7:30 pm
Forum: SIMATIC system
Topic: [?]: Can you explain what this logic means?
Replies: 3
Views: 3339

Re: [?]: Can you explain what this logic means?

1 to 3: This parts are temp Variables, here the converter saves the accu1 and 2 and stw (status) the converter always saves the accus on the beginning of an FC or FB 5: every command make changes in the stw, take a look at the manual 4: this is indirect addressing L DB10.DBB 1 SLW 4 LAR1 Here the By...
by centipede
Mon Dec 27, 2010 1:52 pm
Forum: SIMATIC system
Topic: [?]: cable drawing to connect cpu155( port 25=>9 pin) to pc
Replies: 1
Views: 1852

Re: connect cpu155(s5) to pc

I think you mean a 150U with a AS511 Interfacecard!
If you have an Standard S5 Cable you can build an adaptercabel.


15pol (Standard S5 Cable) ------ 25 pol (AG-AS511)

6 ------ 19 (RxD)
2 ------ 20 (TxD)
7 ------ 18 (-20mA/R)
9 ------ 21 (+20mA/T)
8,15 ------ 24,25,1 (Shield)
by centipede
Tue Sep 21, 2010 11:13 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

In these blocks are the code for the IP and some else.
Look for a person next to you, which can help with Step5.
Now it's not so easy to help you more.
by centipede
Tue Sep 21, 2010 9:31 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

You cannot have an QVZ with the Digital Equipment. Your Istack says the last called Block befor OB23 was FB57, this Block read and write to the IP242. It's the 1st block communicate to the IP in FB161 in OB20. Anyway you can check the Cardadress if pull the card out of the rack, than you see dill-sw...
by centipede
Tue Sep 21, 2010 9:12 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Hi,
do you change both or first the PS and check and second the IP and check?
Are you sure you have the correct settings on the IP?

If you want to pay I come and solve your problem! :mrgreen:
by centipede
Mon Sep 20, 2010 8:17 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Take it!!
by centipede
Mon Sep 20, 2010 4:01 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Ok, for testing.... there is a connector (switch) inside the PowerSupply named F-R. Normaly closed, if you will open the PS don't make a shutdown if it have fanfault. It is only for testing, the 135U needs the fans! Why you don't post the Modelnumber of your spare PS?? I can't say if it's ok or not ...
by centipede
Mon Sep 20, 2010 9:08 am
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

normaly the powersupply makes a shutdown if it have a fan fault.
15V never exists if you don't have a 15V module inside the PS.
by centipede
Mon Sep 20, 2010 7:27 am
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Is it correct, you have a fan fault?
by centipede
Sun Sep 19, 2010 9:40 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

The PB,OB and FB of the programms are the same. The 51170E is a backup of the PLC, the Schoed is the Offline Version. Definitly your IP242 is not accessable, if you don't have made any changes before on the IP I'm sure its broken. You need a sparepart. I think we can finish the search, you must chan...
by centipede
Sun Sep 19, 2010 5:10 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Sorry I just see it now....
If DB18 D31.0 = 0 than you only have one IP242. Its for a other type of machine.

So I think your IP242 is broken. I hope for you, you have a spare part.
Otherwise look at Eba...!
by centipede
Sun Sep 19, 2010 12:01 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Pls tell us how many IP242 do you have in your PLC? I always see only one IP242 on your picture. The 2. is an IP243 (near the CPU). It is completely different to the IP242. If you have only one, than your program is the problem. It's written for 2xIP242. Are you sure thats your program is written fo...
by centipede
Sat Sep 18, 2010 5:48 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

OK, your problem is the IP242 6ES5 242-1AA13. It's a 5 Channel Fast Counter Module, very old. I think you have 2 of them. The 1st uses the PW 224-239, the 2nd 240-255. Wich of them is broken are not responsive, you can only check if you are online. So the FB57 is in use several times in your program...
by centipede
Sat Sep 18, 2010 10:16 am
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

If your CPU is in Stop and so you have BASF it is normal you don't have an Output Signal.
I think you are not the right man for this problem.
by centipede
Sat Sep 18, 2010 10:14 am
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

Your Problem is the card after the DO. If you are not able to tell us what card is plugged, we cannot say what you can do. And don't look to FB47, look to FB57. Here is the command like L PEW or T PEW. So we can see what card is the issue for your problem. Your problem IS NOT any Digital Input or Ou...
by centipede
Fri Sep 17, 2010 11:21 am
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: [?]: S5 135 PLC problem

PEU means in your program is coded a direct access to the peripherie like L PEW or T PAW (german mnemonik). Your 1st error picture shows an stop comand as the cause of your problem (cause of interrupt STP). The place is OB23 on relative adress 08h (REL-SAC). Your last FB before stop was the FB57. I ...
by centipede
Thu Sep 16, 2010 10:00 pm
Forum: SIMATIC system
Topic: [?]: S5 135 PLC problem
Replies: 41
Views: 17669

Re: S5 PLC problem

After your DO there is an 4 Channel module (WFxxx or IPxxx?).
Your pictures shows an PEU (periphery not clear) and stops at OB23 with a Stopcommand.
So I think this module is your problem!
Take a look at FB57!
by centipede
Mon May 10, 2010 11:21 am
Forum: SIMATIC system
Topic: [?]: Replacing CPU S5-95F (6ES5 095-8FB01) ERROR
Replies: 3
Views: 2801

Re: [?]: Replacing CPU S5-95F (6ES5 095-8FB01) ERROR

Hi,

do you change only one CPU or both?
Both of the CPUs must have the same Version!
by centipede
Tue May 04, 2010 2:30 pm
Forum: SIMATIC system
Topic: [?-]: Premium Studio will no longer
Replies: 4
Views: 5393

Re: [?-]: Premium Studio will no longer

Wait for Step7 Professional 2010 (Step7 v5.5)... comes in 07.2010
by centipede
Mon Apr 12, 2010 2:47 pm
Forum: SIMATIC system
Topic: [?]: More than 31 slaves with 314C-2DP
Replies: 2
Views: 2126

Re: [?]: More than 31 slaves with 314C-2DP

but the 314C only can connect 32 Slaves!
by centipede
Sat May 09, 2009 8:31 am
Forum: SIMATIC system
Topic: [?]:Profibus Analyzer
Replies: 7
Views: 8251

Yes, only with CP possible.
by centipede
Sat May 09, 2009 7:35 am
Forum: SIMATIC system
Topic: [?]:Profibus Analyzer
Replies: 7
Views: 8251

You can use the Amprolyzer from Siemens. It´s Freeware.

http://support.automation.siemens.com/W ... 2Fmain.asp
by centipede
Fri Apr 17, 2009 3:48 pm
Forum: SIMATIC system
Topic: [?-]: converter hardware s5 to s7
Replies: 3
Views: 2867

How do you want to convert the Hardware from S5 to S7?
It is by you to choose the right things.
There is no tool to convert the Hardware.
by centipede
Fri Feb 27, 2009 11:24 am
Forum: SIMATIC HMI
Topic: [?]: Why WinCC Flexible 2008 doesn't support TP-178..?
Replies: 5
Views: 4085

Only WinCC flex 2004 SP1 Chinese Version supports this panel.
by centipede
Wed Oct 31, 2007 1:55 pm
Forum: SIMATIC system
Topic: [Request]: com 155H
Replies: 2
Views: 3497

COM155H

rapidshare [dead] 155H.zip