Hello, it looks you have to use GP-Pro Ex Software for LT3201:
https://www.pro-face.com/files/pdf/prod ... nual_e.pdf
If it doesn't start there is no way do save the application from HMI.
But may be it's only back light issue? What is the status of LEd on the front?
Best regards
Search found 100 matches
- Tue Apr 12, 2022 5:54 am
- Forum: Other PLC
- Topic: schneider Pro-Face LT3201
- Replies: 1
- Views: 684
- Thu Apr 07, 2022 9:23 am
- Forum: Other PLC
- Topic: Schneider M238
- Replies: 3
- Views: 1158
Re: Schneider M238
You wish to download the application from the PLC, not to upload the application to the PLC.
Well, without upload information information on the PLC there is no way do download it.
Такая вот фигня.
Well, without upload information information on the PLC there is no way do download it.
Такая вот фигня.
- Thu Feb 10, 2022 8:20 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Project pass is HNB@NISH
- Mon Feb 07, 2022 1:24 pm
- Forum: Utilites
- Topic: tsx c usb 485 driver
- Replies: 1
- Views: 2189
- Thu Nov 18, 2021 10:10 am
- Forum: Other PLC
- Topic: Schneider TSX PLC Connection
- Replies: 5
- Views: 2694
Re: Schneider TSX PLC Connection
Hi, first of all you need to install and setup the unitelway driver. Then by using driver manager you need to setup the communication settings. Then you will be able by using driver manager to check the connection to the PLC. Only after that you can start the PL7 and try to estabsh the connection to...
- Mon Aug 02, 2021 8:20 am
- Forum: Other PLC
- Topic: Please Help, looking for SE firmware 2.8 for M340
- Replies: 2
- Views: 973
Re: Please Help, looking for SE firmware 2.8 for M340
Hi, which one M340 PLC?
- Fri Jan 15, 2021 7:11 am
- Forum: Utilites
- Topic: ELAN Memory card explorer
- Replies: 0
- Views: 2751
ELAN Memory card explorer
Hello all,
I'm looking for ELAN Memory card explorer software to be able to read data from PCMCIA card.
Thanks.
I'm looking for ELAN Memory card explorer software to be able to read data from PCMCIA card.
Thanks.
- Thu Jan 14, 2021 7:23 am
- Forum: Other PLC
- Topic: Telemecanique TSX47 / who may read out program from cartridge?
- Replies: 2
- Views: 1284
Re: Telemecanique TSX47 / who may read out program from cartridge?
Hello Stefan, you got the answer already. Why to ask again the same question?
- Thu Jan 07, 2021 7:01 am
- Forum: Other PLC
- Topic: Schneider Systyem
- Replies: 3
- Views: 1508
- Wed Jan 06, 2021 9:03 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
the files can't be downloaded.
- Wed Jan 06, 2021 8:57 am
- Forum: Other PLC
- Topic: M580 SD CARD
- Replies: 1
- Views: 892
Re: M580 SD CARD
do you know which size exactly have BMXRMS004GPF card?
How do you wish to cone it, if PC doesn't recognize it as SD card?
How do you wish to cone it, if PC doesn't recognize it as SD card?
- Mon Dec 21, 2020 7:28 am
- Forum: Other PLC
- Topic: Schneider Systyem
- Replies: 3
- Views: 1508
Re: Schneider Systyem
What do really wand to know?
M580 and M340 Proxy communicate via Io Scanner or READ_VAR block - see youtube.
Just set Modbus+ and IP addresses for all hardware and also set the PLC address for M340 proxy - that is all.
It takes 5-10 minutes to get it working for someone, who knows this components.
M580 and M340 Proxy communicate via Io Scanner or READ_VAR block - see youtube.
Just set Modbus+ and IP addresses for all hardware and also set the PLC address for M340 proxy - that is all.
It takes 5-10 minutes to get it working for someone, who knows this components.
- Tue Dec 01, 2020 2:36 pm
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Sorry, there is no password. The password can be deleted, but you can't see the pass.
Please read the description on the first page how to remove the pass.
Sorry, I can't provide it.
Please read the description on the first page how to remove the pass.
Sorry, I can't provide it.
- Fri Nov 27, 2020 2:48 pm
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
- Mon Nov 23, 2020 9:45 am
- Forum: Other PLC
- Topic: Ecostruxure Control expert (Unity Pro V14)
- Replies: 21
- Views: 48300
Re: Ecostruxure Control expert (Unity Pro V14)
why not just download the software direct from www.se.com webpage?
- Mon Sep 28, 2020 7:41 am
- Forum: Other PLC
- Topic: UnityPRO CANOpen
- Replies: 1
- Views: 836
Re: UnityPRO CANOpen
You will find huge amount of manuals directly on youtube extra for all, who hasn't time to read manuals.
https://www.youtube.com/watch?v=ZACdErCMnEM
https://www.youtube.com/watch?v=ZACdErCMnEM
- Tue Jun 16, 2020 10:47 am
- Forum: Other PLC
- Topic: Trick using two plc simulator with Unity Pro13 - Same PC
- Replies: 1
- Views: 1016
Re: Trick using two plc simulator with Unity Pro13 - Same PC
The simulator doesn't simulate the communication, so no I/O scanner or read/write with SIM.
- Tue Jun 16, 2020 7:37 am
- Forum: Other PLC
- Topic: Schneider Premium Non-modbus data exchange/
- Replies: 2
- Views: 1212
Re: Schneider Premium Non-modbus data exchange/
Можно, используя OpenTCP. Для этого понадобится TSXWMY100 модуль и библиотеки.
- Wed Mar 11, 2020 3:51 pm
- Forum: Other PLC
- Topic: Ecostruxure Control expert (Unity Pro V14)
- Replies: 21
- Views: 48300
Re: Ecostruxure Control expert (Unity Pro V14)
Bad news for you, doesn't matter what you choose - the license is not more valid after that.
- Thu Nov 28, 2019 3:07 pm
- Forum: Other PLC
- Topic: Ecostruxure Control expert (Unity Pro V14)
- Replies: 21
- Views: 48300
Re: Ecostruxure Control expert (Unity Pro V14)
please provide your original app, I'll have it converted.
- Wed Jun 26, 2019 5:38 am
- Forum: Other PLC
- Topic: IO error on BMXAMI0810
- Replies: 1
- Views: 867
Re: IO error on BMXAMI0810
How have you configured the channels? In case of 4-20ma probably you have not wired all channels and get the broken wire error.
Anyway you can see the reason for error directly in UnityPro in online mode.
Anyway you can see the reason for error directly in UnityPro in online mode.
- Mon Jun 17, 2019 7:01 am
- Forum: Other PLC
- Topic: Ecostruxure Control expert (Unity Pro V14)
- Replies: 21
- Views: 48300
Re: Ecostruxure Control expert (Unity Pro V14)
well well, just wait a little bit and your trial time is gone
- Thu Mar 21, 2019 7:07 am
- Forum: Other PLC
- Topic: Unlock unity pro s v11.0 project
- Replies: 1
- Views: 1357
Re: Unlock unity pro s v11.0 project
Post your application and you will see.
- Thu Dec 06, 2018 7:35 am
- Forum: Other PLC
- Topic: CPU 113 03 and Nom211 00(Modbus plus)
- Replies: 4
- Views: 2505
Re: CPU 113 03 and Nom211 00(Modbus plus)
Почитал документацию по Modbus+ и не нащел возможности обмена информации между двумя сетями без Bridge Plus.
Если есть проект HMI, то там в device manager можно посмотреть адрес частотника, тогда думаю будет понятно каким образом обменивалась инфо.
Если есть проект HMI, то там в device manager можно посмотреть адрес частотника, тогда думаю будет понятно каким образом обменивалась инфо.
- Wed Dec 05, 2018 8:55 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Hi theo26200,theo26220 wrote:Hi vlad2006gr
Can you help me with this? https://drive.google.com/open?id=1Mi4cp ... SwCIGeUjf5
thanks you much
see PM
- Wed Dec 05, 2018 8:46 am
- Forum: Other PLC
- Topic: CPU 113 03 and Nom211 00(Modbus plus)
- Replies: 4
- Views: 2505
Re: CPU 113 03 and Nom211 00(Modbus plus)
Привет RAGNAROG, у вас две независимые сети MB+ и нет возможности передавать данные из одной сети в другую на прямую. Можно настроить peer-cop в обоих сетях для быстрого обмена информации и использовать регистры PLC как буффер. Т.е. PLC производит обмен данными с частотником - buffer_1, NOM производ...
- Mon Nov 26, 2018 6:50 am
- Forum: Other PLC
- Topic: How to configuration for Momentum Communication 170 PNT 110
- Replies: 4
- Views: 2808
Re: How to configuration for Momentum Communication 170 PNT
The connection via Modbus+ is not so easy to realize as Interbus, you need to know what is peer-cop communication. You configure the base 1 in concept, the base 2 will be not configured in concept at all - I mean you don't see the 170PNT and 170ADM in Concept. Both bases are connected or communicate...
- Fri Nov 23, 2018 6:31 am
- Forum: Other PLC
- Topic: How to configuration for Momentum Communication 170 PNT 110
- Replies: 4
- Views: 2808
Re: How to configuration for Momentum Communication 170 PNT
Hi Danhtran, well, the 171CCC76010 is the PLC and 171ADI35000 is the IO - put both together and the base 1 is ready. For base 2 take 171INT1100 and 170ADM35000 - put both together and connect to base 1 via IO-Bus (Interbus) cable. The communication adapter 170PNT for modbus+ can't be installed on ba...
- Thu Oct 04, 2018 10:41 am
- Forum: Other PLC
- Topic: Difference between RS232, RS485 , RS422
- Replies: 1
- Views: 1972
Re: Difference between RS232, RS485 , RS422
i am new in plc programming . i know the basics difference between the rs232, rs422, rs485. but i am little bit confused in it. so i have the following question regarding these terms. 1. can these protocols communicate with each other i mean rs232 can communicate with rs422 or rs485 and same. 2. my...
- Fri Jun 29, 2018 6:00 am
- Forum: Other PLC
- Topic: quantum cpu113 и hmi панелька
- Replies: 2
- Views: 1455
Re: quantum cpu113 и hmi панелька
Привет ROGNAROG, адреса в Modbus можно записывать разным образом, точнее сказать формат записи зависит от разрботчика. Так например адрес 4000541 можно так же записать как 4:541 или 400541, а так же %MW541 - всё одно и тоже, т.е. адрес 451 holding register. HMI сам считает все нужные ему регистры с ...
- Tue Apr 17, 2018 1:53 pm
- Forum: Other PLC
- Topic: Unity Pro XL **.stu ***.CTX
- Replies: 1
- Views: 2442
Re: Unity Pro XL **.stu ***.CTX
Hello. How do I know which version that I can use? I guess that shoud be a old version because verry old machine. The diffrent extension I have on the old backup I have recieved is Program.xml Program.xdm Program.XEF Program.STU Program.CTX Program.BAK When I try to open it with Unity Pro XL V12 I ...
- Mon Apr 16, 2018 2:52 pm
- Forum: Other PLC
- Topic: Urgent communication between Schneider m340 and honeywell
- Replies: 1
- Views: 1544
Re: Urgent communication between Schneider m340 and honeywel
Hi accmpy,
on M340 side you can only setup the IP-address and %MWi variable addresses.
So, if communication doesn't work, then check the IP and %MWi addresses.
on M340 side you can only setup the IP-address and %MWi variable addresses.
So, if communication doesn't work, then check the IP and %MWi addresses.
- Wed Apr 11, 2018 3:26 pm
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Hello sunshine, please check following info.sunshine wrote:hello Vlad,
please can you found the password of this projects, many thanks
https://mon-partage.fr/f/vCInUa1V/
https://mon-partage.fr/f/WRtbgLWX/
https://mon-partage.fr/f/TVRAq5Ed/
app pass: aeg2-kiabi
dfb pass: aeg2-kia
Best regards
- Wed Apr 11, 2018 3:00 pm
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Hi nene, the DFB pass and app pass are the same: !M@rch?nene wrote:Hello Vlad i hope you doing great!!
please i need your help to find a password for DFBs
https://drive.google.com/file/d/1546-Ka ... sp=sharing
Good luck!
- Thu Mar 08, 2018 8:30 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Привет Vlad,
с помощью какого пароля я смогу сменить пароль на секции в данном проекте?
https://www.file-upload.net/download-13 ... pt.7z.html
Спасибо.
с помощью какого пароля я смогу сменить пароль на секции в данном проекте?
https://www.file-upload.net/download-13 ... pt.7z.html
Спасибо.
- Thu Dec 14, 2017 2:45 pm
- Forum: Other PLC
- Topic: i need software to modicon please
- Replies: 1
- Views: 1538
Re: i need software to modicon please
I'm not sure, but I think you need the software for this plc like AKF programming software for DOS.
Some info you will find here: http://control.com/thread/1026172136
Some info you will find here: http://control.com/thread/1026172136
- Thu Dec 14, 2017 2:29 pm
- Forum: Other PLC
- Topic: Эмулятор modbus rtu rs485
- Replies: 1
- Views: 1613
Re: Эмулятор modbus rtu rs485
Привет Ragnarog,
всегда думал, что симуляторы работают с COM портом, а уж какой адаптер и какая физика RS232/RS485 не играет роли.
Попробуй Generic Modbus/Jbus Tester.
всегда думал, что симуляторы работают с COM портом, а уж какой адаптер и какая физика RS232/RS485 не играет роли.
Попробуй Generic Modbus/Jbus Tester.
- Wed Dec 13, 2017 10:28 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Hello Elecmoon,Elecmoon wrote:Dear Experts, i have a Schneider plc program with a lock icon near the names of DFB's, i am Siemens plc programmer and this type of protection called (KNOW_HOW_PROTECT), i am new in Schnieder, can you help me?
please provide your application
- Fri Oct 06, 2017 12:23 pm
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
Привет Vlad,
*****************
*****************
- Wed Jan 18, 2017 9:48 am
- Forum: Other PLC
- Topic: How to connect to Quantum Schneider PLC can not see config
- Replies: 4
- Views: 2970
Re: How to connect to Quantum Schneider PLC can not see conf
Yes, the upload information is missing.Novice wrote: I think that in the PLC program the guy uncheck the check box Upload information on the project option
is it possible to find out this issues?
- Tue Jan 17, 2017 2:20 pm
- Forum: Other PLC
- Topic: How to connect to Quantum Schneider PLC can not see config
- Replies: 4
- Views: 2970
Re: How to connect to Quantum Schneider PLC can not see conf
I assume you are using UnityPro and Quantum is a highend Quantum PLC right? In this case if you try to upload the application from the PLC you will the application or will will get the message why it doesn't work. 1) which plc do you have? 2) which software do you use? 3) which error message did you...
- Tue Nov 15, 2016 8:43 am
- Forum: Other PLC
- Topic: HeLP modicon m340 and ATV 212
- Replies: 5
- Views: 3424
Re: HeLP modicon m340 and ATV 212
Если уже работало, а теперь нет, то некоторые вещи можно исключить. Проверь следующее: 1) Когда идет опрос по Modbus/TRU, то на процессоре должен загораться LED "Ser" и в в твоём Array St_read_1 во втором слове (INT) будет записана ошибка 2) надеюсь ты не забыл указать timeout в Array St_read_1 в тр...
- Mon Nov 14, 2016 12:43 pm
- Forum: Other PLC
- Topic: HeLP modicon m340 and ATV 212
- Replies: 5
- Views: 3424
Re: HeLP modicon m340 and ATV 212
Здравствуйте господа.Нуждаюсь в вашем совете.Как на ПЛК modicon m340 проверить работу порта Modbus serial port.кратко изложу суть проблемы пропала связь плк с ATV212.Смотрел в меню диагностику, обмена нет.Пробовали сбрасывать до заводских настроек не помогло,пробовали перезагружать приложение и пер...
- Thu Sep 29, 2016 11:38 am
- Forum: Other PLC
- Topic: C++ and PLC
- Replies: 6
- Views: 4696
Re: C++ and PLC
Готовые библиотеки для C++ я к сожалению не видел и Schneider таковых не предлагает.
Знаю, что можно через NOE (через SOAP протокол) вести опрос и запись всех регистров напрямую через VBA или Excel.
Вот на этом сайте есть куча материалов по теме:
http://www.modbus.org/tech.php
Знаю, что можно через NOE (через SOAP протокол) вести опрос и запись всех регистров напрямую через VBA или Excel.
Вот на этом сайте есть куча материалов по теме:
http://www.modbus.org/tech.php
- Thu Sep 29, 2016 6:53 am
- Forum: Other PLC
- Topic: C++ and PLC
- Replies: 6
- Views: 4696
Re: C++ and PLC
Интересно было бы узнать по какому протоколу. Судя по всему %MW100 это всё-таки Schneider и протокол Modbus/TCP или?
- Thu Aug 25, 2016 12:45 pm
- Forum: Other PLC
- Topic: [Support] Profibus Communication Basic Questions
- Replies: 3
- Views: 2929
Re: [Support] Profibus Communication Basic Questions
Hello Ali,
try to find anything by using google. I know this module very good, so I'm able to let it work with closed eyes
try to find anything by using google. I know this module very good, so I'm able to let it work with closed eyes
- Tue Aug 23, 2016 11:50 am
- Forum: Other PLC
- Topic: [Support] Profibus Communication Basic Questions
- Replies: 3
- Views: 2929
Re: [Support] Profibus Communication Basic Questions
Hello Ali, I will try to answer some of your questions. 1) I have DB9 Female connector in both devices, what are standard pin-out for Profibus Communication. You don't need to know pinout, just open the DB9 profibus-connector and you will find only 2 color marked pins suitable for profibus cable. 2)...
- Wed Aug 17, 2016 6:58 am
- Forum: Other PLC
- Topic: DEAD ERROR No. 305
- Replies: 3
- Views: 2322
Re: DEAD ERROR No. 305
really strange solution May be you had luck. Thanks for feedback!ernandef wrote:Hello SE_support !
I solved this issue on other way. I opened my cpu and cleaned all connections inside. After that, the problem was solved.
Thank you!!
- Mon Aug 15, 2016 8:41 am
- Forum: Other PLC
- Topic: DEAD ERROR No. 305
- Replies: 3
- Views: 2322
Re: DEAD ERROR No. 305
Hello ernandef,
in most cases you need to check/replace your power supply (140CPSxxxxx).
in most cases you need to check/replace your power supply (140CPSxxxxx).
- Tue Jul 19, 2016 5:58 am
- Forum: Other PLC
- Topic: [?]: Unprotect Schneider PL7-Pro DFBs
- Replies: 623
- Views: 606210
Re: [?]: Unprotect Schneider PL7-Pro DFBs
А зачем вам нужен пароль? 7:HKLD2013 = это зашифрованный пароль. Там стоит галка криптовать его. В этом проекте вы можете с помощью пароля A5Y5AQ199FQDE9K сменить пароль, и потом уже с новым паролем снять защиту. Основной пароль состоит из 10 знаков. Тот, который вы вводите, криптуется и потом уже ...