Search found 39 matches

by Novice
Wed Nov 29, 2023 3:06 pm
Forum: Siemens Hardware & Software
Topic: S 400 PLC -Need help to have redundancy PLC with ET200
Replies: 4
Views: 1708

Re: S 400 PLC -Need help to have redundancy PLC with ET200

Thanks guys for the answer,

is it possible to have only the redundancy on the CPU, to bring the same configuration of the PS, CPU, CP...etc or I should bring the same configuration of the CPU and Remote IO (ET 200) ?
Thanks in advance for your support.

Image
by Novice
Tue Nov 28, 2023 5:38 pm
Forum: Siemens Hardware & Software
Topic: S 400 PLC -Need help to have redundancy PLC with ET200
Replies: 4
Views: 1708

S 400 PLC -Need help to have redundancy PLC with ET200

Hello guys, I have actually the following configuration: 1/ Power supply :PS 407 10A 2/ CPU : CPU 410-5H 3/ Communication module "Advanced System interface": CP 443-1 4/ Communications processor Extended for connection: CP 443-5 connected to OLM Converter Profibus fiber optic . 5/ Remote IO ET 200M ...
by Novice
Sat Jun 10, 2023 11:36 am
Forum: PLC's books
Topic: [Request] IEC 60870-5-104 and IEC 60870-5-101
Replies: 8
Views: 20424

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Dear,

Please can you re-share the link because this is not working any more.
Please can you re-load it .

Thanks a lot.
by Novice
Tue Nov 09, 2021 9:27 pm
Forum: Other PLC
Topic: EcoStruxure Automation Expert
Replies: 0
Views: 996

EcoStruxure Automation Expert

Dear,

Please can someone share me the software EcoStruxure Automation Expert.
Thanks in advances
Best Regards,
by Novice
Sun Aug 29, 2021 8:42 pm
Forum: Other PLC
Topic: M262 IOT Setup Ethernet port 1, MQTT
Replies: 0
Views: 861

M262 IOT Setup Ethernet port 1, MQTT

Dear All,

Please I need an explanation how to setup the Ethernet port 1 and 2.
I need also to know how to setup MQTT on M262.
Thanks in advance
by Novice
Sun Jul 18, 2021 7:55 am
Forum: Other PLC
Topic: Need EcoStruxure Machine Expert pro
Replies: 1
Views: 1514

Need EcoStruxure Machine Expert pro

Dear gentleman and ladies,

Please I need the Software EcoStruxure Machine Expert pro(with licence).
Thanks in advance
by Novice
Thu Mar 26, 2020 3:38 pm
Forum: Other PLC
Topic: Ecostruxure Control expert (Unity Pro V14)
Replies: 21
Views: 47354

Re: Ecostruxure Control expert (Unity Pro V14)

Any update...
by Novice
Tue Apr 23, 2019 10:42 am
Forum: Other PLC
Topic: Schneider SMS notification
Replies: 2
Views: 2915

Re: Schneider SMS notification

Hello Dear,
Do you have any updates regarding this post, also I am looking for this kind of information.
Please can you update this post.
by Novice
Tue Nov 20, 2018 7:20 pm
Forum: Other PLC and HMI (Russian)
Topic: [?+]: modbus simulator
Replies: 10
Views: 18884

Re: [?+]: modbus simulator

Hello All,
Please can you share me ModScan64 and ModSim64.
Now our operating system is 64 Bits, so I need ModScan working on 64Bits.
Thank you So Much.
by Novice
Mon Sep 10, 2018 7:19 am
Forum: Other HMI
Topic: Vijeo Designer Cleaner
Replies: 1
Views: 1654

Vijeo Designer Cleaner

Hello,

I need a software to remove/clean the regedit of vijeo designer software(V6.2).
I have some bugs...I uninstall re-install always the same issue, so i need to remove the software from windows register to clean completly the machine and to re-install.
Thank you in advance.
by Novice
Sat Jul 28, 2018 5:28 pm
Forum: Industrial network
Topic: NTP SERVER SIMULATOR AND CLIENT MONITORING SOFTWARE
Replies: 2
Views: 7101

Re: NTP SERVER SIMULATOR AND CLIENT MONITORING SOFTWARE

dear Qqwww,
Please can you tell me how to do it...if there is any documentation or procedure...
Thank you so much
by Novice
Tue Jul 24, 2018 1:52 pm
Forum: Industrial network
Topic: NTP SERVER SIMULATOR AND CLIENT MONITORING SOFTWARE
Replies: 2
Views: 7101

NTP SERVER SIMULATOR AND CLIENT MONITORING SOFTWARE

Dear All, Please anyone can Share me a Software for NTP(Network Time Protocol) :(freeware or cracked) - Server (to simulate like a server, share the real time clock through the Network ). - Client (to take the message from the NTP Server and Update the clock ). Please I need a software to do this ex...
by Novice
Mon Jul 10, 2017 1:48 pm
Forum: Other PLC
Topic: How to register Unity Diff V8.0
Replies: 1
Views: 1686

Re: How to register Unity Diff V8.0

Please All,

I need help , I need the method , how to register Unity Diff V8 because I can not register through web...etc . Now the software to register unity Diff V8 is Licence Manager.

If you have a method or something....please let me know.

Thank you in advance.
by Novice
Sun Jul 02, 2017 11:15 am
Forum: Other PLC
Topic: How to register Unity Diff V8.0
Replies: 1
Views: 1686

How to register Unity Diff V8.0

Dear All,

Please can anyone explain us How to register Unity Diff V8.0 .

if there is some method or crack.

Best Regards
by Novice
Sun Mar 26, 2017 6:10 am
Forum: Other PLC
Topic: [?]: Unity Pro - How to Compare Logic of two applications
Replies: 8
Views: 8908

Re: [?]: Unity Pro - How to Compare Logic of two application

Dear All,

Please can you post the part number for Unity Pro DIFF V2.2
Thanks
by Novice
Sat Mar 25, 2017 7:30 pm
Forum: Other PLC
Topic: [LINK]: Sepam software sft2885 (Logipam)
Replies: 4
Views: 7718

Re: [LINK]: Sepam software sft2885 (Logipam)

Thank , Please can you give us the register code
by Novice
Tue Mar 21, 2017 9:42 pm
Forum: Other PLC
Topic: [LINK]: Sepam software sft2885 (Logipam)
Replies: 4
Views: 7718

Re: [LINK]: Sepam software sft2885 (Logipam)

Please vlad2006gr
can you re-put the link, this is not working

Thanks in Advances
by Novice
Tue Mar 21, 2017 9:39 pm
Forum: Other PLC
Topic: Schneider Software for Sepam SFT 2841
Replies: 0
Views: 1344

Schneider Software for Sepam SFT 2841

Dear all,

Please can you give me the link where I can find the Software of the Sepam Series
SFT 2841 with the registration code

Thanks!
by Novice
Wed Jan 18, 2017 11:00 am
Forum: Other PLC
Topic: How to connect to Quantum Schneider PLC can not see config
Replies: 4
Views: 2938

Re: How to connect to Quantum Schneider PLC can not see conf

I think that in the PLC program the guy uncheck the check box Upload information on the project option is it possible to find out this issues? Yes, the upload information is missing. The Question, How I can access to the Application of the PLC there is tricks ? or can I take from the memory card (i...
by Novice
Tue Jan 17, 2017 8:57 pm
Forum: Other PLC
Topic: How to connect to Quantum Schneider PLC can not see config
Replies: 4
Views: 2938

Re: How to connect to Quantum Schneider PLC can not see conf

thanks , 1/ I try to connect Quantum schneider electric PLC 2/ I use unity pro xl 3/ I use usb cable , I start unity pro I conect my computer with Unity pro(xl) to the CPU, I have the message conected but I can NOT bring the Application PLC because there only " Transfert Project from PLC" is not ava...
by Novice
Tue Jan 17, 2017 1:59 pm
Forum: Other PLC
Topic: How to connect to Quantum Schneider PLC can not see config
Replies: 4
Views: 2938

How to connect to Quantum Schneider PLC can not see config

Dear All, last week I was on the site and to try to get the PLC application of the Quantum Schneider PLC I connect my laptop through USB cable BUT I can not download the PLC Program may be there is some restriction of Upload download the PLC Program Please if someone can Help me this is very importa...
by Novice
Sun Aug 07, 2016 12:58 pm
Forum: Other PLC
Topic: M340 PLC as Modbus gateway
Replies: 3
Views: 2516

Re: M340 PLC as Modbus gateway

Dear krishy

you can use Read_var and Write_var, We powerful function !
by Novice
Mon Jul 18, 2016 1:40 pm
Forum: Other HMI
Topic: StructureWare Power Monitoring Schneider Software
Replies: 0
Views: 1828

StructureWare Power Monitoring Schneider Software

Dear All

Please Anyone have StructureWare Power Monitoring Schneider Software (with crack)
and tutorial or any documentation regarding the Software

Thanks
by Novice
Sun Apr 24, 2016 11:43 am
Forum: Other HMI
Topic: [link] Vijeo Designer 6.2
Replies: 44
Views: 227076

Re: [link] Vijeo Designer 6.2

it's not working
Please someones can put the procedure to describe step by step how to do it
because this is not clear how to proceed it
Thanks you so much in advance ;)
by Novice
Sat Jan 02, 2016 6:28 am
Forum: Other PLC
Topic: Crack for ISaGraf?
Replies: 3
Views: 5593

Re: Crack for ISaGraf?

hello All,

Please somebody can give us ISAGraF to install it (V3.55 )

thanks in advance
by Novice
Thu Mar 12, 2015 8:30 pm
Forum: Other PLC
Topic: modicon tsx processor locked
Replies: 1
Views: 1888

Re: modicon tsx processor locked

Hello dear Moh555,

can you give us more detail what is the message that you have when you connect to the CPU
by Novice
Wed Aug 06, 2014 11:28 am
Forum: Other PLC
Topic: HOW to UNLOCK the program section in Unity Pro Program
Replies: 1
Views: 1700

HOW to UNLOCK the program section in Unity Pro Program

Dear All,

I would like to know , How I can unlock the program section in Unity Pro Application program
Image
Thanks All
by Novice
Sat May 24, 2014 6:47 am
Forum: Other PLC
Topic: Caterpillar Software for Generator
Replies: 0
Views: 1866

Caterpillar Software for Generator

Hello All
I would like to know some information regarding Caterpillar Generator
- EMCP 3.3 mapping register with Modbus

if somebody have some knowledge regarding the Modbus communication or some exemple of Cat Generator

Also, if somebody have a Caterpillar Generator Software.

Thanks
by Novice
Sat Apr 12, 2014 4:48 pm
Forum: Other PLC
Topic: STB Problem of download the setting
Replies: 1
Views: 1547

STB Problem of download the setting

Hello All, Somebody can enplane me how I can make the setting of STB NIM 2311 I try many time, I proceed like this: connect to the NIM2311 with the serial cable to the CFG port of NIM2311 , I upload the setup. I modify the setup (analog card..-10 :+10 V to 4:20mA, ...) ... I want to Download my setu...
by Novice
Tue Jan 28, 2014 2:39 pm
Forum: Other PLC
Topic: [LINK]: MODSOFT Software
Replies: 11
Views: 12577

Re: [LINK]: MODSOFT Software

Thanks a lot my Dear Schtiel

can you tell how I can install it in my computer
I have OS Windows XP SP3 because I don't How to install it.
maybe we need virtual machine?
Again, Thanks a lot for your precious support
by Novice
Mon Jan 06, 2014 7:57 pm
Forum: Other PLC
Topic: [LINK]: MODSOFT Software
Replies: 11
Views: 12577

[LINK]: MODSOFT Software

Hello All,

I need the software Modsoft,
please can you give me a valid link for download it.
Thanks
by Novice
Mon Dec 16, 2013 1:56 pm
Forum: Other PLC
Topic: WANT TO RESET CPU TSX57 2634 PREMIUM AS THE FACTORY SETTING
Replies: 0
Views: 1477

WANT TO RESET CPU TSX57 2634 PREMIUM AS THE FACTORY SETTING

Hi All, I have some problems with the TSX57 2634M PREMIUM - I can not connect to the CPU through the mini DIN with the cable TSX CUSB485 + TSXCRJMD25 in SET ADDRESS Menu I choice : ADDRESS : SYS MEDIA : USB -->Please can you tell me if I did the good selection. Also this CPU have one port of Communi...
by Novice
Thu Jul 11, 2013 12:13 pm
Forum: Other PLC
Topic: CONCEPT V2.6 R7- How to configure the Reboot(restart) in hot
Replies: 1
Views: 1748

CONCEPT V2.6 R7- How to configure the Reboot(restart) in hot

Hello All, I want to know how to configure the PLC with the software programming CONCEPT V2.6 Release 7 for the CPU will restart at hot "processing". The CPU is 434 12a another question? I would like know if it is possible to logging with Unity Pro V7 for download the Concept Program inside the CPU ...
by Novice
Sun Jun 23, 2013 1:44 pm
Forum: SIMATIC system
Topic: PROFIBUS SIMULATOR SOFTWARE
Replies: 1
Views: 3136

PROFIBUS SIMULATOR SOFTWARE

Hello the Experts,
I would like know if exist a software for Profibus simulator.
I want to simulate a variable with the simulator with the Laptop through RS232 or RS485 and I see the value in a device.
Can you tell me if it's possible to have the simulator Profibus.
Thanks you in advance
by Novice
Thu Mar 07, 2013 4:42 pm
Forum: Other PLC
Topic: Problem: IP Address of Ethernet module of Quantum NOE 771
Replies: 3
Views: 2776

Problem: IP Address of Ethernet module of Quantum NOE 771

hello colleagues
I have an ETHERNET Module type 140 NOE 771 11
I have a problem that I don't remember the IP Address
The MAC address doesn't work??? it's very strange.
Please, if someone can help me find the address or have a software for scanning the IP Address?
thank you
by Novice
Wed Feb 06, 2013 10:11 pm
Forum: Other PLC
Topic: TIMESTAMP WITH M340 AND UNITY PRO
Replies: 2
Views: 2430

TIMESTAMP WITH M340 AND UNITY PRO

Hi the Experts! So, I want to know if it's possible to create a timestamp bases on events and to display through Magelis 15" and store them in a table of values on the PLC. I tried with the word of system %SW49..........%SW53 but it was becomes a big plant of Gas"very difficult", it's not a function...
by Novice
Mon Jan 28, 2013 4:15 pm
Forum: Other PLC
Topic: STB Ethernet Commnication-Schneider IO deport
Replies: 2
Views: 2314

Re: STB Ethernet Commnication-Schneider IO deport

Thanks a lot my Dear, I will try and when I do it I will come back to confirm, because sometimes the constructor of PLC between the reality and the theorie have a big difference.
once more thank you very much (pgood)
by Novice
Mon Jan 21, 2013 9:45 pm
Forum: Other PLC
Topic: STB Ethernet Commnication-Schneider IO deport
Replies: 2
Views: 2314

STB Ethernet Commnication-Schneider IO deport

Hello the experts
Can you tell me, if it is possible to connect 3 PLC "through Ethernet" on the STB modules "IO deport- ref: STB NIP 22 12 "Modbus TCP IP". And the 3 PLC can give a command and status?
Thanks you for your technicals Supports.
regards.