Search found 49 matches

by MEFinc
Fri Jun 17, 2022 7:08 am
Forum: SIMATIC system
Topic: Tia portal used for upload any programs
Replies: 2
Views: 922

Re: Tia portal used for upload any programs

If your PLC is not too old (I don't remember exactly but FW need to be V3.0 or higher and TIA Portal V13 or higher) then you can watch version of TIA Portal project in: Online access => Your PLC => Online & diagnostics => Diagnostics => General => Version of TIA Portal project.
by MEFinc
Wed Jan 19, 2022 6:41 am
Forum: Simatic (Russian)
Topic: Как в TIA Portal подключить устройство по Ethernet, если его нет в базе портала?
Replies: 4
Views: 1830

Re: Как в TIA Portal подключить устройство по Ethernet, если его нет в базе портала?

Вам необходимо найти конфигурационный файл .GSDML для вашего устройства (обычно идет комплектно с оборудованием или скачивается с сайта производителя). Добавить его в базу TIA Portal-а (через меню: "Options -> ...GSD"). Найти инструкцию на ваше устройства для протокола Profinet IO (обычно идет компл...
by MEFinc
Wed Feb 24, 2021 7:45 am
Forum: Other (only about CAD and Soft)
Topic: Patch EPLAN P8 (V1.8-V2.7) 2018-12-16
Replies: 65
Views: 118360

Re: Patch EPLAN P8 (V1.8-V2.7) 2018-12-16

winloud wrote:
Wed Feb 24, 2021 3:00 am
MEFinc wrote:
Wed Jan 13, 2021 11:29 am
Try new HASP (the latest version 8.15).
I upadted to 7.92, the program became very slow. I use version 5.5, the doggle always could't work after 1 hr a time, and pop out a warnning.
I recommend to use chaos363's keygen from topic: "Eplan P8 2.8/2.9 + personal keygen".
by MEFinc
Wed Jan 13, 2021 11:29 am
Forum: Other (only about CAD and Soft)
Topic: Patch EPLAN P8 (V1.8-V2.7) 2018-12-16
Replies: 65
Views: 118360

Re: Patch EPLAN P8 (V1.8-V2.7) 2018-12-16

Try new HASP (the latest version 8.15).
by MEFinc
Thu Oct 24, 2019 6:35 am
Forum: SIMATIC system
Topic: SCL command to Set output then make it off after some time
Replies: 4
Views: 3254

Re: SCL command to Set output then make it off after some time

Why you don't want to use timers? It's the easiest way to solve your task.
by MEFinc
Thu Oct 17, 2019 10:37 am
Forum: Other (only about CAD and Soft)
Topic: [LINK]: siemens tool box ii
Replies: 4
Views: 9183

Re: [LINK]: siemens tool box ii

Who could update the links for: "Sicam Tool Box II" or maybe upload new version.
Thx.
by MEFinc
Tue Oct 08, 2019 5:32 am
Forum: Simatic (Russian)
Topic: ComfortPanel TP1200 как отключить System events?
Replies: 5
Views: 2973

Re: ComfortPanel TP1200 как отключить System events?

Находим объекты: "Alarm window", "Alarm indicator" и отключаем пункт "General => System".
По умолчанию создаются в "Screen management => Global screen".
by MEFinc
Thu May 09, 2019 2:48 pm
Forum: SIMATIC system
Topic: [LINK]: STEP 7 V5.6 SR2 Professional version 2017/2020
Replies: 52
Views: 263930

Re: [LINK]: STEP 7 V5.6 SR1 Professional version 2017/2018

(sdown) Hotfix 3 STEP 7 V5.6 SP1 / STEP 7 Professional 2017 SR1 HW Config · The installation of HSPs is now possible using the command line call via the HSP installer. You can find more information in the help on configuring the hardware in topic "Installing HW Updated via the Command Line". · The ...
by MEFinc
Tue Dec 18, 2018 6:21 am
Forum: Simatic HMI (Russian)
Topic: KTP 400
Replies: 3
Views: 2825

Re: KTP 400

У меня на одном объекте сразу три панели таких вылетели KTP400 BASIC (6AV2123-2DB03-0AX0), с очередностью в день. Помогло только восстановление с флешки (USB Recovery (Reset to factory) Mode for 2nd Generation Basic Panels) и то не все прошивки заработали, вроде только с 14.0.1 пошли.
by MEFinc
Fri Sep 14, 2018 11:02 am
Forum: Simatic HMI (Russian)
Topic: [Link] USB Recovery for 2nd Generation Basic Panels
Replies: 4
Views: 12904

Re: [Link] USB Recovery for 2nd Generation Basic Panels

Очень выручили. Благодарю.
by MEFinc
Fri Sep 14, 2018 10:15 am
Forum: Simatic HMI (Russian)
Topic: [Link] USB Recovery for 2nd Generation Basic Panels
Replies: 4
Views: 12904

[Link] USB Recovery for 2nd Generation Basic Panels

Добрый день, кто с доступом для загрузки ПО, на Siemens, помогите скачать: "Basic2nd Recovery Stick". У самого доступ слетел, сейчас отправил запрос, но они будут несколько дней открывать, а нужно как всегда срочно. Спасибо. Ссылка на тему: USB Recovery (Reset to factory) Mode for 2nd Generation Bas...
by MEFinc
Mon Jul 30, 2018 9:01 pm
Forum: SIMATIC system
Topic: [LINK]: STEP 7 V5.6 SR2 Professional version 2017/2020
Replies: 52
Views: 263930

Re: [LINK]: STEP 7 V5.6 HF4 Professional version 2017

Hotfix 5 download for STEP 7 V5.6 and STEP 7 Professional 2017
(sdown) https://support.industry.siemens.com/cs ... ional-2017
by MEFinc
Fri Jul 13, 2018 12:35 pm
Forum: Simatic HMI (Russian)
Topic: TIA Portal WinCC HMI
Replies: 39
Views: 15879

Re: TIA Portal WinCC HMI

Вы хотите сделать как в этом примере: How do you use screen windows and TagPrefix with WinCC RT Professional?
by MEFinc
Thu Jul 12, 2018 7:14 am
Forum: Simatic (Russian)
Topic: Проблемы с запуском Plcsim в TIA Portal 11
Replies: 4
Views: 3458

Re: Проблемы с запуском Plcsim в TIA Portal 11

Да вы правы. Симуляция для S7-1200 (FW V4.x) появилась с V13 SP1 при установке PLCSIM V13 SP1.
by MEFinc
Mon Jul 09, 2018 3:18 pm
Forum: Simatic HMI (Russian)
Topic: C Scrips (RUS Language)
Replies: 1
Views: 1870

C Scrips (RUS Language)

Доброго денька, подскажите, в чем может быть проблема с отображением русского языка при написании C Script-от? При этом, когда напрямую прописываешь свойства и когда пишешь аналогичный код в VB Script все хорошо. В настройках WinCC ставил русский язык, также ставил: Runtime settings — Language & fon...
by MEFinc
Mon Jul 09, 2018 1:48 pm
Forum: Simatic HMI (Russian)
Topic: User Data Type (UDT)
Replies: 0
Views: 1377

User Data Type (UDT)

Доброго дня, подскажите как правильно привязать UDT контроллера S7-315-2PN/DP к UDT WinCC? При абсолютной адресации UDT в WinCC, почему-то всегда идет смещение переменной на 1-2 байта, при этом становится затруднительным передача переменных Real, DWord. С контроллерами семейства S7-1200/1500 таких п...
by MEFinc
Mon Feb 05, 2018 6:35 am
Forum: Simatic HMI (Russian)
Topic: Вопрос по тиражированию однотипных объектов в WinCC v14
Replies: 52
Views: 31125

Re: Вопрос по тиражированию однотипных объектов в WinCC v14

Это единственно возможный вариант? Может есть способы попроще, может правильно делать вызов окна не через "visibility"?
by MEFinc
Fri Feb 02, 2018 12:39 pm
Forum: Simatic HMI (Russian)
Topic: Вопрос по тиражированию однотипных объектов в WinCC v14
Replies: 52
Views: 31125

Re: Вопрос по тиражированию однотипных объектов в WinCC v14

Добрый день, всегда мучил такой вопрос по Screen Window. Когда работаю со всплывающими окнами, всегда делаю свою кнопку на закрытие/скрытие данного окна (п.1). https://i.imgur.com/s8m2ThF.jpg Хотелось бы использовать встроенную кнопку на закрытие (п.2), но так как всплывающее окно делаю через свойст...
by MEFinc
Mon Jan 22, 2018 3:05 pm
Forum: Drivers and Inverters
Topic: ACS880-01-072 R5 Тип тормозного чоппера
Replies: 2
Views: 3255

Re: ACS880-01-072 R5 Тип тормозного чоппера

С информацией по R1-R5 проблемы, там все напаяно на плате и АББ не дает информации по отдельным элементам (если только специально заказать с прерывателем и разбирать).
Начиная с R6 информация имеется.
by MEFinc
Thu Jun 08, 2017 6:26 am
Forum: Simatic (Russian)
Topic: Фильтр сглаживания для аналогового сигнала
Replies: 12
Views: 9130

Re: Фильтр сглаживания для аналогового сигнала

Еще как вариант:
1. Настроить фильтрацию в hardware канала.
2. Реализовать фильтр (3 строчки кода в SCL):
Image
by MEFinc
Thu Oct 06, 2016 7:24 am
Forum: SIMATIC system
Topic: [LINK]: TIA Portal V14 + SP1 + Updates 3 (2017/09/29)
Replies: 77
Views: 337876

Re: [LINK]: TIA Portal V14 Trial is ready for download

Have you any problems with W10? STEP 7 Professional / Basic V14 are released for use with the following operating systems (64-bit only): [list]Microsoft Windows 7 Home Premium SP1 (STEP 7 Basic only) Microsoft Windows 7 Professional SP1 Microsoft Windows 7 Enterprise SP1 Microsoft Windows 7 Ultimate...
by MEFinc
Thu Feb 04, 2016 1:58 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

Parameter file . You only need to initialize extension module FAIO-01 (in 14 group) and set AI3 for feedback signal (in 40.8 ). P.S. In common DC systems if brake chopper doesn't use, then overvoltage and undervoltage control is set as enable. In your ACS600 they are disabled and I don't know why (...
by MEFinc
Tue Feb 02, 2016 3:39 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

Do you have brake resistor (connected to the 2 drive)?
by MEFinc
Sat Jan 30, 2016 8:43 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

To convert par. file ACS600 to ACS880 with Drive Composer you need DriveWindow (2.3 or higher) par. file, not DriveWindow Light file (as you have). I looked your file, you have easy drive settings so you could enter parameter by your hands. I don't know your ACS880 drive type and it software, so I e...
by MEFinc
Fri Jan 29, 2016 11:27 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

I couldn't download file (it gives me some .exe file). Please give direct link.
You only have a problem with AI? You have FIO-11 module or FAIO-01?
by MEFinc
Fri Jan 29, 2016 4:02 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

Upload your parameter file I'll try to help.
by MEFinc
Thu Jan 28, 2016 4:59 pm
Forum: Drivers and Inverters
Topic: convert ABB ACS600 to ACS880
Replies: 13
Views: 13503

Re: convert ABB ACS600 to ACS880

AP program or parameters? If parameters then you need Drive Composer.
by MEFinc
Tue Apr 21, 2015 2:24 pm
Forum: Drivers and Inverters
Topic: [Request]: DriveBrowser. ABB Software
Replies: 1
Views: 3567

Re: [Request]: DriveBrowser. ABB Software

Hmm, as I thought — nobody have. And where/why disappeared Linkinx64?
by MEFinc
Mon Apr 20, 2015 12:22 pm
Forum: Drivers and Inverters
Topic: ABB Sami Ministar
Replies: 1
Views: 3875

Re: ABB Sami Ministar

Try to use documentation from another SAMI products (maybe some parameters will be the same). For example SAMI STAR.
by MEFinc
Sun Mar 22, 2015 1:00 pm
Forum: Drivers and Inverters
Topic: Abb Acs800 standard Control program 7.x firmware software
Replies: 2
Views: 4098

Re: Abb Acs800 standard Control program 7.x firmware softwar

Hi, I don't understand, you need firmware or software manual for ACS800?
All manuals you can find on ABB drive page.
by MEFinc
Sun Mar 01, 2015 12:17 pm
Forum: Drivers and Inverters
Topic: [Request]: DriveBrowser. ABB Software
Replies: 1
Views: 3567

[Request]: DriveBrowser. ABB Software

Hello and let me to congratulate everyone with the first day of spring. :) At a very soon time, I'll configure and do start-up work with a large amount of ACS800 drives (all connected through ethernet), so maybe someone could help me to find this software or will be so kind and share this program ( ...
by MEFinc
Mon Oct 13, 2014 6:17 am
Forum: Drivers and Inverters
Topic: [Request]: DriveLoader ABB software
Replies: 4
Views: 9791

Re: [Request]: DriveLoader ABB software

DriveWindow doesn't include DriveLoader.
DriveLoader is separate service software.
by MEFinc
Wed Apr 30, 2014 3:44 pm
Forum: Drivers and Inverters
Topic: Request: Drive Composer Pro
Replies: 3
Views: 7699

Re: Request: Drive Composer Pro

You can download it from the official site.
THIS is the direct link to Drive Composer Pro 1.5.0.0.
by MEFinc
Sat Jan 25, 2014 6:26 pm
Forum: Other PLC
Topic: [LINK]: Control Builder Plus PS501 V2.2
Replies: 41
Views: 64614

Re: [LINK]: Control Builder Plus PS501 V2.2

Thank you very much for such present.
Linkinx64 wrote:As good as your internet bandwidth...
It took me about eight hours to download and install all =).
by MEFinc
Thu Jan 16, 2014 5:30 pm
Forum: Other PLC
Topic: [LINK]: Control Builder Plus PS501 V2.2
Replies: 41
Views: 64614

Re: [LINK]: Control Builder Plus PS501 V2.2

Have good news?
by MEFinc
Thu Jan 16, 2014 5:26 pm
Forum: Drivers and Inverters
Topic: [?]:
Replies: 3
Views: 4013

Re: Required: ABB Drivewindow for ACS800

In THIS topic Linkinx64 gave the link for downloading (DriveWindow_v2.30.zip). I checked, it's working. It on Filefactory but you don't need to registrate or something.
by MEFinc
Thu Jan 16, 2014 5:12 pm
Forum: Drivers and Inverters
Topic: [?]:
Replies: 3
Views: 4013

Re: [?]: replace ABB ACS800 Drive RMIO card

If you bought RMIO with firmware for your drive type (inverter type) then you don't need do anything. When you turn on (first 2-3 seconds) a drive, if all alright, you will see your type of drive on the screen. If you use RMIO from another drive or RMIO with another firmware (not standart for exampl...
by MEFinc
Mon Dec 23, 2013 6:05 pm
Forum: Drivers and Inverters
Topic: [LINK]: Drive Studio for Acsm1 ABB
Replies: 8
Views: 26717

Re: [LINK]: Drive Studio for Acsm1 ABB

The link from Linkinx64 is working.
HERE you can download the update to 1.6 version.
by MEFinc
Mon Nov 25, 2013 8:54 pm
Forum: Other PLC
Topic: [LINK]: Control Builder Plus PS501 V2.2
Replies: 41
Views: 64614

Re: [LINK]: Control Builder Plus PS501 V2.2

Thanks Linkinx64 for your help with CB v2.2. Maybe you have v2.3 (need for ACS880 drive) or you know how to upgrade the old one?
by MEFinc
Fri Nov 01, 2013 10:52 am
Forum: Drivers and Inverters
Topic: Request: Drive Composer Pro
Replies: 3
Views: 7699

Re: Request: Drive Composer Pro

Service pack 1.4.3.0 include the full programm, but you can use it only for one month (it doesn't have the registration key).
(dlink) Drive composer pro Service pack 1.4.3.0
by MEFinc
Fri Nov 01, 2013 10:44 am
Forum: Drivers and Inverters
Topic: [Request]: DriveLoader ABB software
Replies: 4
Views: 9791

Re: [Request]: DriveLoader ABB software

This is only update for DL1.1 to DL1.2 :( .
by MEFinc
Tue Oct 15, 2013 6:22 pm
Forum: Drivers and Inverters
Topic: [?]: not connecting to ABB ACS550
Replies: 8
Views: 9046

Re: [?]: not connecting to ABB ACS550

Hmm, so poor information.
Ok, that may be problem like with communication settings (you set not correct value of com-port, use usb3.0 and ect.) or with software of your computer or sofware of drive...
For first, check this (from page #8.2): DriveWindow Light 2.93 User Guide
by MEFinc
Fri Oct 11, 2013 8:09 am
Forum: Drivers and Inverters
Topic: [?]: not connecting to ABB ACS550
Replies: 8
Views: 9046

Re: [?]: not connecting to ABB ACS550

You can use port number two or anyone else, it doesn't matter.
Show the parameters of your COM-ports. And screenshot of the error.
by MEFinc
Thu Oct 10, 2013 2:59 pm
Forum: Drivers and Inverters
Topic: [?]: not connecting to ABB ACS550
Replies: 8
Views: 9046

Re: [?]: not connecting to ABB ACS550

rajeshputta wrote:while connecting through PC to OPCA-02 cable to ABB ACS550 drive, it shows error CRC.
help me how to over come this problem
iam using to connect the drive DWL2.6
help
rajesh.putta
Check the parameters of your COM-port and drive.
Image
by MEFinc
Mon Oct 07, 2013 12:55 am
Forum: Drivers and Inverters
Topic: [Request]: DriveLoader ABB software
Replies: 4
Views: 9791

Re: [Request]: DriveLoader ABB software

Two years gone.. So it would be perfect, if someone who have this program could share it.
P.S. For those who interested, this program is using for downloading firmware in ABB drives: ACS310-ACS550.
by MEFinc
Wed Feb 29, 2012 5:24 pm
Forum: Drivers and Inverters
Topic: [?]: ACS600 problem
Replies: 2
Views: 4767

Re: [?]: ACS600 problem

Как решили проблему?
by MEFinc
Thu Dec 08, 2011 11:37 am
Forum: Drivers and Inverters
Topic: [Request]: DriveLoader ABB software
Replies: 4
Views: 9791

[Request]: DriveLoader ABB software

Hello everyone, may be somebody have this program and can share it?