Search found 37 matches
- Tue Nov 26, 2019 10:03 pm
- Forum: SIMATIC HMI
- Topic: wincc for windows 7
- Replies: 3
- Views: 3383
Re: wincc for windows 7
link please?
- Tue Nov 26, 2019 1:32 pm
- Forum: SIMATIC HMI
- Topic: wincc for windows 7
- Replies: 3
- Views: 3383
wincc for windows 7
hello
i need wincc for windows 7 and fully working pls?
i need wincc for windows 7 and fully working pls?
- Mon Dec 18, 2017 5:50 pm
- Forum: Drivers and Inverters
- Topic: protecting a servo and vfd drives
- Replies: 1
- Views: 3359
protecting a servo and vfd drives
hello
i have a packaging machine controlled by plc and servo drives .
the power is not stable comes and goes all the time, how to protect my machine from power failure an over voltage ?
i have a packaging machine controlled by plc and servo drives .
the power is not stable comes and goes all the time, how to protect my machine from power failure an over voltage ?
- Sun Jan 08, 2017 1:13 pm
- Forum: Other HMI
- Topic: proface gp37w2
- Replies: 2
- Views: 5146
Re: proface gp37w2
hello any one ?
- Mon Dec 19, 2016 9:48 am
- Forum: Allen-Bradley (Rockwell Automation)
- Topic: slc05/03 programming cable
- Replies: 1
- Views: 2341
slc05/03 programming cable
hello
could give me the pinout for the programming cable of the cpu slc05/03?
could give me the pinout for the programming cable of the cpu slc05/03?
- Wed Sep 28, 2016 5:49 pm
- Forum: SIMATIC system
- Topic: 226 cpu dc/dc/dc
- Replies: 0
- Views: 1600
226 cpu dc/dc/dc
hello
can i inverse the polarity in 1L+ and 1M (Solid state–MOSFET)?
can i inverse the polarity in 1L+ and 1M (Solid state–MOSFET)?
- Mon Sep 26, 2016 10:30 am
- Forum: Drivers and Inverters
- Topic: two phase stepper motor does not complete it steps
- Replies: 1
- Views: 3737
two phase stepper motor does not complete it steps
hello
i'am controling a stepper motor(1.8°/step) with a drive that uses pulses to control the steps but when i send my pulses(200) from s7-200 the first round does not complete ? i'am sure that my pulses are 200 pulse could the bearing cause this lack?
i'am controling a stepper motor(1.8°/step) with a drive that uses pulses to control the steps but when i send my pulses(200) from s7-200 the first round does not complete ? i'am sure that my pulses are 200 pulse could the bearing cause this lack?
- Thu Sep 08, 2016 5:57 am
- Forum: Drivers and Inverters
- Topic: sh21006c stepper motor driver
- Replies: 1
- Views: 3702
- Wed Jul 27, 2016 1:09 pm
- Forum: Drivers and Inverters
- Topic: sh21006c stepper motor driver
- Replies: 1
- Views: 3702
sh21006c stepper motor driver
hello
i want to control a stepper motor using this drive sh21006c, it has two inputs , pulse signal and direction .
what determens the speed and the steps ?
i want to control a stepper motor using this drive sh21006c, it has two inputs , pulse signal and direction .
what determens the speed and the steps ?
- Tue May 17, 2016 3:38 pm
- Forum: Other HMI
- Topic: proface gp37w2
- Replies: 2
- Views: 5146
proface gp37w2
hello
how to override the password set by another user ?
how to override the password set by another user ?
- Fri Mar 11, 2016 1:29 pm
- Forum: Other HMI
- Topic: request GTdesigner2
- Replies: 0
- Views: 1424
request GTdesigner2
hello
i need gt designer2 ?
i need gt designer2 ?
- Mon Feb 22, 2016 7:09 pm
- Forum: Other PLC
- Topic: request:vipa speed 7 studio
- Replies: 1
- Views: 2677
request:vipa speed 7 studio
hello
i need vipa speed 7 studio ?
i need vipa speed 7 studio ?
- Thu Jun 25, 2015 7:27 pm
- Forum: Other PLC
- Topic: request: gx developer
- Replies: 1
- Views: 2065
request: gx developer
hello
i need gx developer for my plc ?
i need gx developer for my plc ?
- Sat May 09, 2015 8:28 pm
- Forum: SIMATIC system
- Topic: [?]: cpu 313c problem
- Replies: 8
- Views: 5488
Re: [?]: cpu 313c problem
hello
i downloaded a new program with an empty ob1 and the cpu starts normally but when i tried to update the real time clock the time is lost and the date is set to 1994 , i think the problem is in the MMC ?
i downloaded a new program with an empty ob1 and the cpu starts normally but when i tried to update the real time clock the time is lost and the date is set to 1994 , i think the problem is in the MMC ?
- Sat May 02, 2015 7:12 pm
- Forum: SIMATIC system
- Topic: request : siemens simit
- Replies: 2
- Views: 3912
request : siemens simit
hello
can you give me link to download siemens simit?
can you give me link to download siemens simit?
- Thu Apr 30, 2015 9:50 pm
- Forum: SIMATIC system
- Topic: [?]: cpu 313c problem
- Replies: 8
- Views: 5488
Re: [?]: cpu 313c problem
hi comod
i checked the i/o rack is ok there is no faulty module ?
what do you suggest to solve this problem ?
i checked the i/o rack is ok there is no faulty module ?
what do you suggest to solve this problem ?
- Wed Apr 29, 2015 9:49 pm
- Forum: SIMATIC system
- Topic: [?]: cpu 313c problem
- Replies: 8
- Views: 5488
Re: [?]: cpu 313c problem
yes the ob86 an ob122 are amready loaded , here is the diagnostic buffer http://txt.do/xyxj Event 5 of 10: Event ID 16# 38C4 Distributed I/Os: station return Address of the affected DP slave: station number: 1 DP master system ID: 2 Log. base address of the DP slave: Input address: 1022 Log. base ad...
- Sun Apr 26, 2015 9:31 pm
- Forum: SIMATIC system
- Topic: [?]: cpu 313c problem
- Replies: 8
- Views: 5488
[?]: cpu 313c problem
have a 313c cpu the switch is always on RUN mode when i cut off the power and power it on it goes on stop mode
the problem is that the cpu runs normally when i put the switch on STOP mode and swich it back on RUN mode(manual start).
the problem is that the cpu runs normally when i put the switch on STOP mode and swich it back on RUN mode(manual start).
- Wed Mar 25, 2015 10:43 pm
- Forum: SIMATIC HMI
- Topic: dip switch on mp277
- Replies: 1
- Views: 2777
dip switch on mp277
hello
which one of these configuration(dip switch) should i use to transfer a project from pc to hmi ? plese see the attachment ?
http://img15.hostingpics.net/pics/955526Sanstitre.png
which one of these configuration(dip switch) should i use to transfer a project from pc to hmi ? plese see the attachment ?
http://img15.hostingpics.net/pics/955526Sanstitre.png
- Sun Nov 23, 2014 4:17 pm
- Forum: Other HMI
- Topic: hitech pws5600t-s hmi and s7-200 plc com problem
- Replies: 0
- Views: 1308
hitech pws5600t-s hmi and s7-200 plc com problem
hello
i have a s7-200 plc connected to a hitech pws5600 hmi but the hmi shows this message "com1 connection" and does not respond .
i checked the link cable it is ok and i'am suspecting the port on the hmi .am i wrong or right please help me ?
i have a s7-200 plc connected to a hitech pws5600 hmi but the hmi shows this message "com1 connection" and does not respond .
i checked the link cable it is ok and i'am suspecting the port on the hmi .am i wrong or right please help me ?
- Tue Feb 19, 2013 10:54 pm
- Forum: SIMATIC system
- Topic: what is TIA portal v11?
- Replies: 1
- Views: 2455
what is TIA portal v11?
hello
what is tia portal v11 , where can i use and what are it's features ?
what is tia portal v11 , where can i use and what are it's features ?
- Sat Dec 08, 2012 3:46 pm
- Forum: Other PLC
- Topic: request : unity pro
- Replies: 1
- Views: 1758
request : unity pro
hello
i need unity pro ,can anyone help me ?
i need unity pro ,can anyone help me ?
- Thu Nov 29, 2012 7:37 pm
- Forum: Utilites for Simatic PLC
- Topic: [LINK]: Documentation and Demonstration disks
- Replies: 34
- Views: 104583
Re: [LINK]: Documentation and Demonstration disks
hello
there is a problem with rapideshare i can't dowloand , this message appears : file owner's public traffic exhausted .
can you reupload on other servers?
there is a problem with rapideshare i can't dowloand , this message appears : file owner's public traffic exhausted .
can you reupload on other servers?
- Fri Oct 12, 2012 4:35 pm
- Forum: SIMATIC system
- Topic: [?]: simulate pcs7 6.1
- Replies: 4
- Views: 3993
Re: [?]: simulate pcs7 6.1
can i simulate the work of the faceplat created with wincc wich is included in the pcs7?
- Fri Oct 12, 2012 2:58 pm
- Forum: SIMATIC system
- Topic: [?]: simulate pcs7 6.1
- Replies: 4
- Views: 3993
[?]: simulate pcs7 6.1
hello
can i create a program and faceplate on pcs7 and simulate them on the pc like a real instalation ,if yes how please ?
can i create a program and faceplate on pcs7 and simulate them on the pc like a real instalation ,if yes how please ?
- Thu Oct 11, 2012 10:25 pm
- Forum: SIMATIC system
- Topic: [?]: simulate the step7 and wincc flexible program
- Replies: 5
- Views: 4950
Re: [?]: simulate the step7 and wincc flexible program
thanks for all of you
- Thu Oct 11, 2012 8:55 pm
- Forum: SIMATIC system
- Topic: [?]: simulate the step7 and wincc flexible program
- Replies: 5
- Views: 4950
Re: [?]: simulate the step7 and wincc flexible program
can use the iterface created with wincc and simulate it with plcsim also like a real plc and hmi ?
- Thu Oct 11, 2012 4:57 pm
- Forum: SIMATIC system
- Topic: [?]: simulate the step7 and wincc flexible program
- Replies: 5
- Views: 4950
[?]: simulate the step7 and wincc flexible program
hello
can i do a program of a simple process with step 7 and the interface with wincc flexible and simulate the program ?
can i do a program of a simple process with step 7 and the interface with wincc flexible and simulate the program ?
- Tue Oct 02, 2012 6:37 pm
- Forum: SIMATIC system
- Topic: [?]: need configure PLC s7-416-3 dp and PCS7 station
- Replies: 0
- Views: 1675
[?]: need configure PLC s7-416-3 dp and PCS7 station
hello i have to do a program whith pcs7 and cemat , the job requested is to configuer frmo an engineering station ,an OS and realize program which controls a silos in cement plant the list of the hardware part is : s7-400:-416-3 dp - cp 443-1 - cp 443-5 EXT and ET200M whith digital I/O. the enginner...
- Thu Sep 27, 2012 5:55 pm
- Forum: SIMATIC system
- Topic: [?]: profinet and PCS7
- Replies: 0
- Views: 1609
[?]: profinet and PCS7
hello i'am a student in automation and i had a training in a cement factory , they control the process whith PCS7. i just want to ask you :what type of protocol is being used to connect the engennering station and operator station and the main plc s7-400 ? is it profinet of just another type of ethe...
- Wed Sep 26, 2012 8:07 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: i need some pcs 7 guides and tutorials
- Replies: 3
- Views: 7638
[?]: i need some pcs 7 guides and tutorials
hello
i'am a student and i'am getting started with pcs7 and cemat , i need some guides and tutorials ?
i'am a student and i'am getting started with pcs7 and cemat , i need some guides and tutorials ?
- Mon Jun 11, 2012 3:39 pm
- Forum: Other PLC
- Topic: [?]: SEND_REQ function in pl7
- Replies: 0
- Views: 1724
[?]: SEND_REQ function in pl7
hello
i want to use send_req function to put a tsx slave to RUN mode from a tsx master but how this function works what should i write to have a correct syntax?
i want to use send_req function to put a tsx slave to RUN mode from a tsx master but how this function works what should i write to have a correct syntax?
- Fri May 18, 2012 8:19 pm
- Forum: Other PLC
- Topic: communication problem with TSX3721??
- Replies: 3
- Views: 4312
Re: communication problem with TSX3721??
did that,still not workingSerge_n wrote:Uninstall the old Unitelway-driver and install Unitelway-driver with the Driver Pack.
Удалите старый Unitelway-драйвер и установите драйвер из Драйвер Пака.
- Wed May 16, 2012 4:06 pm
- Forum: Other PLC
- Topic: communication problem with TSX3721??
- Replies: 3
- Views: 4312
communication problem with TSX3721??
hello i was trying to connect to the plc to upload the program but through pl7pro from my pc via tsxpcx1031 cable but when i pressed connect a message appeared and it said : Unable to establish the physical link with the PLC address SYS via driver UNTLW01. i checked the COM port,the cable and the dr...
- Fri Feb 17, 2012 7:46 pm
- Forum: Other HMI
- Topic: request : archestra ide v3.0 or higher
- Replies: 0
- Views: 2124
request : archestra ide v3.0 or higher
hello
i've installed intouch 10.1 and i need archestra ide v3.0 or higher ?
i've installed intouch 10.1 and i need archestra ide v3.0 or higher ?
- Fri Dec 09, 2011 3:20 pm
- Forum: Other HMI
- Topic: request : library rich with images and objects
- Replies: 0
- Views: 1258
request : library rich with images and objects
I would like a library rich with images of processes and actuators and buttons for magelis xbt ....?
- Sat Nov 19, 2011 1:26 pm
- Forum: SIMATIC system
- Topic: [?]: s7-300 cpu 313 technical characteristics
- Replies: 1
- Views: 1578
[?]: s7-300 cpu 313 technical characteristics
i'am doing a research about S7-300 CPU 313 and i need technical characteristics for my prsentation .