Hi,
If You use IM153-1 You are able to reach I/O modules just from one redundant CPU. With IM153-2 You can simultaneously connect to both redundant CPU-s
Search found 182 matches
- Wed Nov 29, 2023 3:39 pm
- Forum: Siemens Hardware & Software
- Topic: S 400 PLC -Need help to have redundancy PLC with ET200
- Replies: 4
- Views: 1741
- Wed Nov 29, 2023 11:59 am
- Forum: Siemens Hardware & Software
- Topic: S 400 PLC -Need help to have redundancy PLC with ET200
- Replies: 4
- Views: 1741
Re: S 400 PLC -Need help to have redundancy PLC with ET200
Hi,
For this You need IM135-2 (6ES7153-2AR04-0XA0) SIMATIC DP, ET 200M Red. Bundle Consisting of: 2x IM 153-2HF (6ES7153-2BA10-0XB0), 1x bus module in/in (6ES7195-7HD10-0XA0)
Also You should have active backplane bus modules
For this You need IM135-2 (6ES7153-2AR04-0XA0) SIMATIC DP, ET 200M Red. Bundle Consisting of: 2x IM 153-2HF (6ES7153-2BA10-0XB0), 1x bus module in/in (6ES7195-7HD10-0XA0)
Also You should have active backplane bus modules
- Mon Dec 04, 2017 11:10 am
- Forum: Other PLC
- Topic: search Ets3_Pro_Eib_Instabus_Multilingual_Full_License
- Replies: 13
- Views: 10065
- Mon Nov 13, 2017 1:53 pm
- Forum: Other Books
- Topic: Bernd Gischel Eplan electric p8 reference handbook
- Replies: 4
- Views: 9177
- Sun Feb 12, 2017 11:35 pm
- Forum: Other (only about CAD and Soft)
- Topic: Help with EPLAN 2.6
- Replies: 1
- Views: 3300
- Fri Jan 20, 2017 2:47 pm
- Forum: SIMATIC system
- Topic: DBx.DBDxxx to output
- Replies: 6
- Views: 4467
Re: DBx.DBDxxx to output
Could You clarify Your problem. DBx.DBDx is DOUBLE WORD data, which is 32bits wide.
- Fri Jan 20, 2017 1:57 pm
- Forum: SIMATIC system
- Topic: DBx.DBDxxx to output
- Replies: 6
- Views: 4467
Re: DBx.DBDxxx to output
if You use STL than:
a DB1.DBX0.5
= Q0.1
Upper code You can easy convert to LAD or FBD
regards
a DB1.DBX0.5
= Q0.1
Upper code You can easy convert to LAD or FBD
regards
- Sun Dec 18, 2016 4:55 pm
- Forum: Other PLC
- Topic: [Request] IEC104 slave simulator software
- Replies: 2
- Views: 3217
Re: [Request] IEC104 slave simulator software
Hi, You can find good simulator on: http://www.trianglemicroworks.com/products/downloads Software is not free, but You have test period (I think 21 days) Name of software is Test Harness In attachment You will find one Siemens test software for 104 protocol https://dl.dropboxusercontent.com/u/722394...
- Fri Nov 04, 2016 12:22 am
- Forum: Simatic (Russian)
- Topic: S7-PDIAG
- Replies: 1
- Views: 2187
Re: S7-PDIAG
Hi,
You need to install S7 PDIAG first.
You need to install S7 PDIAG first.
- Sun Oct 16, 2016 10:55 am
- Forum: Simatic (Russian)
- Topic: PID-регулирование процесса в step7
- Replies: 1
- Views: 2271
Re: PID-регулирование процесса в step7
Hi,
You can find some examples and a lot of literature on
https://support.industry.siemens.com/cs/start?lc=en-US
in search put for example: PID control FB41
kind regards
You can find some examples and a lot of literature on
https://support.industry.siemens.com/cs/start?lc=en-US
in search put for example: PID control FB41
kind regards
- Mon Dec 21, 2015 9:10 pm
- Forum: Other (only about CAD and Soft)
- Topic: Dispalying page.row.column Cross reference in eplan
- Replies: 2
- Views: 3003
Re: Dispalying page.row.column Cross reference in eplan
Hi,
For this purpose You need plot frame with columns and rows. In following link You will find example with one plot frame with columns and rows.
link:
https://dl.dropboxusercontent.com/u/722 ... xample.fn1
regards
For this purpose You need plot frame with columns and rows. In following link You will find example with one plot frame with columns and rows.
link:
https://dl.dropboxusercontent.com/u/722 ... xample.fn1
regards
- Tue Dec 01, 2015 1:48 pm
- Forum: SIMATIC system
- Topic: [?]: s7 300 SF Red error
- Replies: 5
- Views: 3694
Re: [?]: s7 300 SF Red error
Hi.
If You use PLC without configured module (in HW config) You have SF LED for sure.
regards
If You use PLC without configured module (in HW config) You have SF LED for sure.
regards
- Sun Nov 29, 2015 6:07 pm
- Forum: SIMATIC system
- Topic: [?+]: S7 300 the module MMC is password protected
- Replies: 8
- Views: 9489
Re: S7 300 the module MMC is password protected
Hi, In following link You have description and two programs with description (unfortunately in Russian). In short You need to insert MMC in external USB card reader (important: do not format S7-MMC card). Start S7imgRD.exe to read image. Afterward start Unlocks7200and300.exe to unlock S7 program fro...
- Sat Oct 17, 2015 7:04 am
- Forum: SIMATIC system
- Topic: STL command list manual??
- Replies: 2
- Views: 2939
Re: STL command list manual??
https://support.industry.siemens.com/cs/document/31977679/simatic-s7-300-instruction-list-s7-300-cpus-and-et-200-cpus?dti=0&lc=en-US https://support.industry.siemens.com/cs/document/60109531/s7-400h-instruction-list-cpu-412-5h-pndp-414-5h-pndp-416-5h-pndp-417-5h-pndp?dti=0&lc=en-US https://support....
- Wed Jul 15, 2015 4:26 pm
- Forum: Other (only about CAD and Soft)
- Topic: EPLAN P8 1.7 connection numbering
- Replies: 1
- Views: 2218
Re: EPLAN P8 1.7 connection numbering
Hi,
In terminal properties under Function definition should stay N-terminal or PE-terminal or SH-terminal or you can make your own function definition. In this case terminals are not numbered in automatic numbering.
regards
In terminal properties under Function definition should stay N-terminal or PE-terminal or SH-terminal or you can make your own function definition. In this case terminals are not numbered in automatic numbering.
regards
- Thu May 07, 2015 5:20 pm
- Forum: Other (only about CAD and Soft)
- Topic: Eplan mounting panel problem
- Replies: 4
- Views: 6172
Re: Eplan mounting panel problem
Hi, Open Project Data -> Parts/Devices -> 2D panel layotut navigator. There You will find all parts which You have to put on panel. If You drag and drop parts from 2D layout navigator You will see green checkbox on placed element (that means that You place element on panel). Important thing is mount...
- Sun May 03, 2015 10:25 pm
- Forum: SIMATIC system
- Topic: daylight saving detection
- Replies: 4
- Views: 3440
Re: daylight saving detection
Hi, For DCF77 You need hardware. There is some functions in OSCAT library link: http://www.oscat.de/component/jdownloads/category/2-oscat-basic.html?Itemid=0 there You can find oscat_basic_332_s7 Step7 library with various functions. In manual oscat_basic333_en there is one function DT2_TO_SDT which...
- Sat Apr 25, 2015 11:29 am
- Forum: Other PLC
- Topic: search Ets3_Pro_Eib_Instabus_Multilingual_Full_License
- Replies: 13
- Views: 10065
- Sat Dec 27, 2014 10:25 pm
- Forum: SIMATIC system
- Topic: Question about PN data reading
- Replies: 6
- Views: 3955
Re: Question about PN data reading
Hi,
I see that Your PLCs are in different subnets. Did You try to establish connection when PLCs are in same subnet. It is possible that Your router block some traffic. Are Your PLCs in same Step7 project? Maybe You should send me project to take a short look.
regards
I see that Your PLCs are in different subnets. Did You try to establish connection when PLCs are in same subnet. It is possible that Your router block some traffic. Are Your PLCs in same Step7 project? Maybe You should send me project to take a short look.
regards
- Fri Dec 19, 2014 3:14 am
- Forum: Simatic (Russian)
- Topic: Нормально открытый контакт не реагирует на команды 0 и 1
- Replies: 8
- Views: 6238
Re: Нормально открытый контакт не реагирует на команды 0 и 1
Hi,
You should not be able to change digital input as You described. Everything is OK with Your installation. It is possible to change for example local memory bits (M0.0...), or some instance or shared data block bits (DI or DB).
regards
You should not be able to change digital input as You described. Everything is OK with Your installation. It is possible to change for example local memory bits (M0.0...), or some instance or shared data block bits (DI or DB).
regards
- Thu Dec 18, 2014 7:21 am
- Forum: Simatic (Russian)
- Topic: Нормально открытый контакт не реагирует на команды 0 и 1
- Replies: 8
- Views: 6238
Re: Нормально открытый контакт не реагирует на команды 0 и 1
Hi,
If You force digital input in one scan than in another scan it is overwritten by real value in process image. If You use PLCSIM then You should force DI in PLCSIM itself. In case of real PLC You should force DI on DI module.
regards
If You force digital input in one scan than in another scan it is overwritten by real value in process image. If You use PLCSIM then You should force DI in PLCSIM itself. In case of real PLC You should force DI on DI module.
regards
- Wed Dec 03, 2014 1:49 pm
- Forum: SIMATIC system
- Topic: Communication between PLC S7 414 and PLC S7 417
- Replies: 2
- Views: 2312
Re: Communication between PLC S7 414 and PLC S7 417
Hi, You should use following manual https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=communication+manual+simatic&ID=78028908&ehbid=78028908&docid=80635207 Go to JUMP DISTRIBUTOR on page 73. Your case is described in 21.5.3 (pa...
- Tue Dec 02, 2014 2:15 pm
- Forum: SIMATIC system
- Topic: Question about PN data reading
- Replies: 6
- Views: 3955
Re: Question about PN data reading
Hi, You should use following manual https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=communication+manual+simatic&ID=78028908&ehbid=78028908&docid=80635207 Go to JUMP DISTRIBUTOR on page 73. Your case is described in 21.4.2 (pa...
- Thu Jul 10, 2014 5:16 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: PLC S7-1200 Tool connected over ethernet
- Replies: 3
- Views: 8257
Re: [?]: PLC S7-1200 Tool connected over ethernet
Hi,
I think that S7-1200 tool is extracted from TIA portal. You should choose right interface for connection to S7-1200.
http://support.automation.siemens.com/W ... n/41737437
regards
I think that S7-1200 tool is extracted from TIA portal. You should choose right interface for connection to S7-1200.
http://support.automation.siemens.com/W ... n/41737437
regards
- Wed Jul 09, 2014 10:48 am
- Forum: Utilites for Simatic PLC
- Topic: [?]: PLC S7-1200 Tool connected over ethernet
- Replies: 3
- Views: 8257
Re: [?]: PLC S7-1200 Tool connected over ethernet
Hi,
I connect without any problems to S/-1200 over 64bit Win7 with TIA portal V12. You should choose right PG/PC interface in Online & diagnostics tool in TIA portal.
regards
I connect without any problems to S/-1200 over 64bit Win7 with TIA portal V12. You should choose right PG/PC interface in Online & diagnostics tool in TIA portal.
regards
- Sun Apr 27, 2014 8:13 am
- Forum: SIMATIC system
- Topic: [?] Combine two Words
- Replies: 5
- Views: 4734
Re: [?] Combine two Words
Hi, If You read question he need to get result 16#BD0744 not 16#BD070044. Therefore I combine second word as byte. If You put in STL L 16#44 You will get L B#16#44 That is just answer on question. If You wish to combine 16#BD07 and 16#0044 then You should shift left 16 bits L W#16#BD07 SLD 16 // shi...
- Thu Apr 24, 2014 8:45 am
- Forum: SIMATIC system
- Topic: [?] Combine two Words
- Replies: 5
- Views: 4734
Re: [?] Combine two Words
Hi,
One correction
Instead of SLD 4 You should put SLD 8 because You need to insert one byte.
regards
One correction
Instead of SLD 4 You should put SLD 8 because You need to insert one byte.
regards
- Wed Apr 23, 2014 9:39 pm
- Forum: SIMATIC system
- Topic: [?] Combine two Words
- Replies: 5
- Views: 4734
Re: [?] Combine two Words
Hi,
You should do following
stl:
L W#16#BD07
SLD 4 // shift left double word
L B#16#44
OD // bitwise OR double word
T MD 0 // result
regards
You should do following
stl:
L W#16#BD07
SLD 4 // shift left double word
L B#16#44
OD // bitwise OR double word
T MD 0 // result
regards
- Thu Nov 21, 2013 8:12 am
- Forum: Siemens Hardware & Software
- Topic: [?]: S7 Siemens SPS SIMATIC Manager
- Replies: 1
- Views: 4594
- Sat Nov 02, 2013 7:14 am
- Forum: Other (only about CAD and Soft)
- Topic: [LINK]: EPLAN Electric P8 Reference Handbook 3ed
- Replies: 14
- Views: 19534
Re: [LINK]: EPLAN Electric P8 Reference Handbook 3ed
Hi,
It seams that link is good. I try it right now and everything working fine.
regards
It seams that link is good. I try it right now and everything working fine.
regards
- Thu Oct 31, 2013 6:01 pm
- Forum: Other (only about CAD and Soft)
- Topic: [LINK]: EPLAN Electric P8 Reference Handbook 3ed
- Replies: 14
- Views: 19534
Re: [LINK]: EPLAN Electric P8 Reference Handbook 3ed
Nice work,
Thanks
Thanks
- Thu Oct 10, 2013 6:18 pm
- Forum: SIMATIC system
- Topic: [HELP] Connecting CP-341 as master [MODBUS RTU]
- Replies: 2
- Views: 2726
Re: [HELP] Connecting CP-341 as master [MODBUS RTU]
Hi, You need to install Loadable driver CP PtP Modbus Master ( https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&objid=24284824&treeLang=en ). Also You need Modbus master hardware dongle 6ES7870-1AA01-0YA0 which is plu...
- Sun Sep 22, 2013 9:46 am
- Forum: SIMATIC system
- Topic: Ethernet in communication profilbus
- Replies: 1
- Views: 1844
Re: Ethernet in communication profilbus
Hi, If You want to use ET200 on Profibus it depend on which type of ET200 You will use. You have ET200S, ET200M, ET200SP for installation in control cabinet or ET200eco and ET200pro for installing outside of control cabinet. You will need Interface module for Profibus for each extension and I/O modu...
- Mon Sep 09, 2013 3:50 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: EPLAN Fluid 2.2 - symbol library is empty.
- Replies: 1
- Views: 4076
Re: [?]: EPLAN Fluid 2.2 - symbol library is empty.
Hi,
You should define libraries which You want to use in each project. Open project You want to edit. Go on Option->Settings...->Projects->"Project name"->Managemet->Symbol libraries. You can specify desired libraries there by pressing Symbol libraries filed.
regards
You should define libraries which You want to use in each project. Open project You want to edit. Go on Option->Settings...->Projects->"Project name"->Managemet->Symbol libraries. You can specify desired libraries there by pressing Symbol libraries filed.
regards
- Wed Sep 04, 2013 5:22 pm
- Forum: SIMATIC system
- Topic: [?]: How to lock or unlock FB bloks?
- Replies: 5
- Views: 7863
Re: [?]: How to lock or unlock FB bloks?
Hi,
Take a search on this site s7canopener. With this tool You can unprotect / protect S7 blocks.
regards
Take a search on this site s7canopener. With this tool You can unprotect / protect S7 blocks.
regards
- Mon Jul 15, 2013 4:05 pm
- Forum: SIMATIC system
- Topic: [?]: PID Temperature Control
- Replies: 1
- Views: 2322
Re: [?]: PID Temperature Control
Hi, take a look on https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csSearch&objaction=cssearch&lang=en&siteid=cseus&query=&query2=pid%20temperature%20control&content=adsearch%2Fadsearch.aspx This is a manual for PID temperature control. Probably You need step controller FB59 (TCONT_...
- Mon Apr 08, 2013 11:43 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?+]: change switch position text in Eplan P8
- Replies: 4
- Views: 4109
Re: change switch position text in Eplan P8
Hi, Open new symbol which You intend to modify (Utilities->Master Data->Symbol->Open). In symbol editor select some symbol properties (for example Device Tag). Right click->Properties. Afterward select icon new (Ctrl+Alt+N). From the list choose property which is interesting for You (for ex. User Su...
- Mon Apr 08, 2013 3:00 am
- Forum: Other (only about CAD and Soft)
- Topic: [?+]: change switch position text in Eplan P8
- Replies: 4
- Views: 4109
Re: change switch position text in Eplan P8
Hi, You have several options. First is to change original symbol which You insert in scheme. Go to Utilities->Master Data->Symbol->Open. Open symbol which You already insert. There You can change look of mentioned symbol. Second option is to make copy of symbol You want to modify. Go to Utilities->M...
- Fri Mar 01, 2013 10:00 pm
- Forum: SIMATIC system
- Topic: Monitor profibus ladder on a network
- Replies: 4
- Views: 2809
Re: Monitor profibus ladder on a network
Hi,
You need Profibus connector with PG interface on top. Also You need communication processor CP5711 or genuine Siemens PG.
regards
You need Profibus connector with PG interface on top. Also You need communication processor CP5711 or genuine Siemens PG.
regards
- Tue Jan 29, 2013 3:19 pm
- Forum: Utilites for Simatic PLC
- Topic: [?]: S7 HVAC LIBRARY
- Replies: 1
- Views: 6083
Re: [?]: S7 HVAC LIBRARY
Hi,
Did You try on http://www.oscat.de. There You have S7 library for building automation alongside with explanations. This is open source code and free to download.
regards
Did You try on http://www.oscat.de. There You have S7 library for building automation alongside with explanations. This is open source code and free to download.
regards
- Tue Dec 18, 2012 8:16 am
- Forum: Other (only about CAD and Soft)
- Topic: [Request] Lightning Protection Design Software
- Replies: 2
- Views: 3342
- Wed Nov 21, 2012 12:26 am
- Forum: Other PLC
- Topic: search Ets3_Pro_Eib_Instabus_Multilingual_Full_License
- Replies: 13
- Views: 10065
- Mon Sep 17, 2012 3:19 pm
- Forum: SIMATIC HMI
- Topic: Request: wincc opc server for knx
- Replies: 2
- Views: 4477
Re: wincc opc server for knx
Hi,
There is one more very good OPC for KNX (http://www.netxautomation.com) but problem with netx is that they require hardware dongle.
regards
There is one more very good OPC for KNX (http://www.netxautomation.com) but problem with netx is that they require hardware dongle.
regards
- Sat Sep 01, 2012 8:51 am
- Forum: Other (only about CAD and Soft)
- Topic: [?]: EPLAN P8 - creating a new symbol unsuccessful
- Replies: 3
- Views: 5195
Re: [?]: EPLAN P8 - creating a new symbol unsuccessful
Hi,
Maybe You should reinstall eplan or if You have some backup of Your symbol library.
regards
Maybe You should reinstall eplan or if You have some backup of Your symbol library.
regards
- Fri Aug 31, 2012 1:29 pm
- Forum: Other (only about CAD and Soft)
- Topic: [?]: EPLAN P8 - creating a new symbol unsuccessful
- Replies: 3
- Views: 5195
Re: [?]: EPLAN P8 - creating a new symbol unsuccessful
Hi, I think that the better idea is first to copy symbol which You want to change (Utilities -> Master Data -> Symbol -> Copy). Then such copied symbol adapt to Your need (delete pins and adapt Function definition - now transducer with two pins). You probably made changes to original symbol (transdu...
- Wed Aug 15, 2012 11:52 pm
- Forum: Other (only about CAD and Soft)
- Topic: Eplan4 Z13 files
- Replies: 3
- Views: 9009
Re: Eplan4 Z13 files
Hi,
If You use Eplan P8 than You can use import Eplan5 project. Go to Project->Eplan5/fluidPlan data import->Project...
Press on Surce dots and in popup check Data Backup (z13,...). Afterward You select Your z13 file
regards
If You use Eplan P8 than You can use import Eplan5 project. Go to Project->Eplan5/fluidPlan data import->Project...
Press on Surce dots and in popup check Data Backup (z13,...). Afterward You select Your z13 file
regards
- Wed Jul 18, 2012 1:19 am
- Forum: SIMATIC system
- Topic: Need advice about DP-Slaves diagnosis
- Replies: 3
- Views: 3939
Re: Need advice about DP-Slaves diagnosis
Hi,
You can use Report System Error. In Hardware configuration when You select CPU under Options You can find report system error. Another possibilities is to use SFC51 (read system status list)
kind regards
You can use Report System Error. In Hardware configuration when You select CPU under Options You can find report system error. Another possibilities is to use SFC51 (read system status list)
kind regards
- Sun Jun 03, 2012 9:48 am
- Forum: SIMATIC system
- Topic: [?]: temporisation with step7
- Replies: 5
- Views: 5281
Re: [?]: temporisation with step7
Hi,
Maybe You should look for SFC101 (Handling Runtime Meters), alongside with SFC2 (SET_RTM), SFC3 (CTRL_RTM) and SFC4 (READ_RTM).
Description of this functions You will find in System Software for S7-300/400
System and Standard Functions.
regards
Maybe You should look for SFC101 (Handling Runtime Meters), alongside with SFC2 (SET_RTM), SFC3 (CTRL_RTM) and SFC4 (READ_RTM).
Description of this functions You will find in System Software for S7-300/400
System and Standard Functions.
regards
- Wed Feb 29, 2012 7:31 am
- Forum: Other (only about CAD and Soft)
- Topic: [EPLAN] Multi-line to single-line shematics ??
- Replies: 4
- Views: 5853
Re: [EPLAN] Multi-line to single-line shematics ??
Hi, You have option Utilities->Exchange symbols single-line<-->multi-line. You select part of elements/pages to convert to single line and apply exchange symbol. But first You have to include IEC single symbol library in Your project (Option -> Setting...-> Projects -> Your project name -> Managemen...
- Fri Jan 20, 2012 8:32 pm
- Forum: SIMATIC system
- Topic: [?]: Simatic STEP7 PID Controller example ?
- Replies: 5
- Views: 10411
Re: [?]: Simatic STEP7 PID Controller example ?
Hi,
Maybe You should start from here
https://www.automation.siemens.com/WW/f ... age=en#top
Here You will find program example for FB41. Also You should call FB41 in some cyclical interrupt OB (for example OB35).
regards
Maybe You should start from here
https://www.automation.siemens.com/WW/f ... age=en#top
Here You will find program example for FB41. Also You should call FB41 in some cyclical interrupt OB (for example OB35).
regards